DeLOCK 42022 M.2 NVMe SSD 외장 케이스 사용 설명서

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your DeLOCK 42022 M.2 NVMe SSD Enclosure. This aluminum enclosure is designed to house two M.2 PCIe NVMe SSDs of various lengths (2280, 2260, 2242, 2230) and connect them to a PC or laptop via USB. Its robust metal housing features a cooling fin design to ensure optimal temperature management for your SSDs. The enclosure also supports various RAID modes when two SSDs are installed.

2. 패키지 내용

아래 나열된 모든 품목이 패키지에 들어 있는지 확인하세요.

• DeLOCK 42022 M.2 NVMe SSD Enclosure (Black, Aluminum)
• 외부 전원 어댑터
• USB Type-C-USB Type-A 케이블
• USB Type-C-USB Type-C 케이블
• 사용 설명서 (본 문서)
• Thermal pads and mounting accessories (screws, rubber nipples)

Image: Contents of the DeLOCK 42022 package, including the enclosure, power adapter, USB cables, and small accessories.

3. 제품 오버view

The DeLOCK 42022 is a high-performance external enclosure designed for M.2 NVMe SSDs. Its robust aluminum construction not only provides durability but also aids in heat dissipation through its finned design. The enclosure features LED indicators for status and an on/off switch for convenient power management.

이미지: 앞면 view of the DeLOCK 42022 M.2 NVMe SSD Enclosure, showcasing its black aluminum body and finned cooling design.

Image: The DeLOCK 42022 enclosure with the internal tray partially extended, revealing the M.2 SSD slots and tool-free mounting mechanism.

이미지: 후면 view of the DeLOCK 42022 enclosure, showing the USB Type-C ports, power input, and on/off switch.

4. 설정 및 SSD 설치

The DeLOCK 42022 enclosure features a tool-free installation mechanism for M.2 SSDs.

1. 인클로저를 엽니다: Gently push the end cap of the enclosure to slide out the internal tray.
2. Insert SSD(s): Align your M.2 PCIe NVMe SSD(s) with the M.2 slot(s) on the PCB. Insert the SSD(s) firmly into the slot(s) at an angle.
3. Secure SSD(s): Once inserted, gently push the SSD down. Use the provided rubber nipples to secure the SSD(s) to the PCB. No screws are required for this step.
4. 열 패드를 적용하세요: For optimal heat dissipation, apply the included thermal pads to the top surface of your SSD(s) where they will make contact with the enclosure's cooling fins.
5. 인클로저를 닫습니다. Carefully slide the internal tray back into the aluminum housing until it clicks securely into place.

메모: Ensure your M.2 SSD is NVMe (PCIe) compatible. SATA M.2 SSDs are not supported by this enclosure.

5. 사용 설명서

5.1. 컴퓨터에 연결하기

1. 전원 연결: Connect the external power adapter to the enclosure's power input and then to a wall outlet.
2. 데이터 케이블을 연결하세요: Use one of the provided USB cables (USB Type-C to Type-C or USB Type-C to Type-A) to connect the enclosure to an available USB port on your computer.
3. 전원 켜기: Flip the on/off switch on the enclosure to the "On" position. The LED indicator(s) should illuminate.
4. 시스템 인식: Your operating system (Windows, macOS, Linux) should automatically detect the new storage device. You may need to initialize and format the SSD(s) through your operating system's disk management utility if they are new.

Image: The DeLOCK 42022 M.2 NVMe SSD Enclosure connected to a laptop via a USB Type-C cable, demonstrating typical usage.

5.2. RAID Configuration (for two SSDs)

If you have installed two M.2 NVMe SSDs, the DeLOCK 42022 enclosure supports various RAID modes. Refer to the specific instructions provided with the enclosure's controller for detailed steps on how to configure RAID 0, RAID 1, JBOD, or other supported modes. Typically, this involves setting jumpers or using a software utility before connecting to the computer for the first time.

중요한: Configuring RAID modes will erase all data on the installed SSDs. Back up any important data before proceeding with RAID configuration.

6. 유지관리

The DeLOCK 42022 enclosure is designed for durability and efficient cooling. To ensure optimal performance and longevity:

• 청소: 케이스를 깨끗하게 유지하고 먼지가 쌓이지 않도록 하십시오. 청소할 때는 부드럽고 마른 천을 사용하십시오. 액체 세척제 사용은 피하십시오.
• 통풍: Ensure the cooling fins are not obstructed to allow for proper heat dissipation.
• 손질: Handle the enclosure with care to prevent physical damage.
• 온도: Operate the enclosure within recommended environmental temperature ranges.

7. 문제 해결

If you encounter issues with your DeLOCK 42022 enclosure, please refer to the following common troubleshooting steps:

• Enclosure not detected:
  • 전원 어댑터가 제대로 연결되어 있고 케이스의 전원이 켜져 있는지 확인하십시오.
  • 컴퓨터의 다른 USB 포트를 사용해 보십시오.
  • 다른 USB 케이블을 사용해 보세요.
  • Verify that the M.2 SSD(s) are correctly seated in their slots.
  • Check your computer's Disk Management (Windows) or Disk Utility (macOS) to see if the drive is detected but uninitialized/unformatted.
• 느린 전송 속도:
  • Ensure you are connected to a USB 3.0 Gen 2 (or higher) port on your computer. Older USB ports will result in lower speeds.
  • Verify that your SSD is performing optimally.
  • Check that the USB cable is rated for high-speed data transfer.
• 인클로저가 뜨겁습니다:
  • The aluminum housing is designed to dissipate heat, so it may feel warm during operation, especially under heavy load. This is normal.
  • Ensure the cooling fins are not blocked and there is adequate airflow around the enclosure.
  • Verify that thermal pads are correctly installed on the SSD(s).
• RAID 구성 문제:
  • Refer to the specific RAID controller instructions for proper setup.
  • Ensure both SSDs are of similar capacity and type for optimal RAID performance.

8. 사양

9. 보증 및 지원

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your retailer. DeLOCK products typically come with a manufacturer's warranty against defects in materials and workmanship. Keep your proof of purchase for warranty claims.

For further assistance, visit the official DeLOCK web사이트를 방문하거나 고객 지원팀에 문의하세요.