중요한 안전 정보
조립 및 사용 전에 모든 지침을 읽고 이해하십시오. 나중에 참조할 수 있도록 이 설명서를 보관하십시오.
- 중량 용량: Do not exceed a total weight of 800 pounds on the bed frame. Exceeding this limit may cause structural damage and potential injury.
- 집회: Follow assembly instructions carefully to ensure stability and safety. Incorrect assembly can lead to instability.
- 매트리스 호환성: Use compatible mattress types to prevent instability. Ensure the mattress fits securely within the frame.
- 바닥 보호: The bed frame includes rubber non-slip pads under the legs to protect your floor from scratches. Ensure these pads are in place during and after assembly.
- LED 조명: Handle LED light components with care. Do not expose to excessive moisture.
- 어린이와 애완동물: Keep small parts away from children and pets during assembly to prevent choking hazards.
패키지 내용
조립을 시작하기 전에 모든 구성품이 있는지 확인하세요. 부품이 누락되었거나 손상된 경우 고객 지원 센터에 문의하세요.
- Headboard (with integrated LED Light)
- 발판
- 사이드 레일
- 강철 슬랫
- Center Support Bars
- 지지 다리
- 조립 하드웨어(나사, 볼트, 와셔, 육각 렌치)
- LED 조명 원격 제어
- 사용 설명서
이미지: 폭발 view of the bed frame components, including headboard, footboard, side rails, slats, and support legs.
설정 및 조립
Assembly typically takes approximately 45 minutes for two adults. Ensure you have adequate space and all tools provided.
- 구성 요소 풀기: 모든 부품을 포장에서 조심스럽게 꺼내세요. 긁힘을 방지하기 위해 깨끗하고 부드러운 표면에 놓으세요.
- 헤드보드에 측면 레일 부착: Connect the side rails to the headboard using the provided hardware. Ensure all connections are secure but do not fully tighten screws until the frame is fully assembled.
- 측면 레일을 발판에 부착하세요: Connect the other end of the side rails to the footboard. Again, ensure connections are secure.
- Install Center Support Bars and Legs: Attach the center support bars and their corresponding legs to the main frame. These provide crucial support for the mattress.
- 슬랫을 놓으세요: Lay the steel slats across the frame. The slats are designed to provide direct support for your mattress without the need for a box spring.
- 슬랫 고정: Secure the slats to the frame using the designated fasteners. This prevents movement and noise.
- 최종 조임: 모든 구성품을 제자리에 설치한 후 나사와 볼트를 조심스럽게 조이세요. 너무 세게 조이지 마세요.
- LED 조명 연결: Plug in the LED light power adapter to a suitable power outlet.
Image: Mattress recommendation and embedded design to prevent mattress sliding.
Operating the LED Light Headboard
The integrated RGB LED light strip in the headboard offers various lighting options to enhance your bedroom ambiance.
특징:
- 다양한 색상: Access over 60,000 color options.
- 모드 스위치: Cycle through various lighting modes and effects.
- 밝기 조절 가능: 원하는 밝기로 조명의 강도를 조절하세요.
- 시간표: Program the lights to turn on or off at specific times.
- 마이크 모드: Lights can react to sound and music detected by the built-in microphone.
- 음악 모드: Lights synchronize with music playback.
제어 방법:
- 원격 제어: Use the provided remote to adjust colors, modes, and brightness.
- 앱 제어: Download the compatible mobile application to control the LED lights via your smartphone. Refer to the LED light manual for app download instructions.
이미지: 이상view of RGB LED light features and control methods.
Image: Visual representation of LED lights during daytime and nighttime.
유지
Regular maintenance ensures the longevity and optimal performance of your bed frame.
- 청소: 금속 프레임을 부드러운 천으로 닦으세요.amp cloth. For the rattan sections, use a soft brush or cloth to remove dust. Avoid harsh chemicals or abrasive cleaners.
- 패스너 조이기: Periodically check and tighten all screws and bolts to maintain stability and prevent squeaking. This is recommended every 3-6 months.
- 슬랫 검사: Ensure all slats are properly seated and undamaged. Replace any broken slats immediately.
- LED 조명: Keep the LED light strip clean and free from dust. If the lights malfunction, check the power connection and remote control battery.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 침대 프레임에서 삐걱거리는 소리가 나요. | 체결 부품이 헐거워짐; 금속 부품 간의 마찰. | Tighten all screws and bolts. The frame includes noise-free strips to minimize friction; ensure they are correctly placed. |
| 매트리스가 미끄러지고 있어요. | Mattress not properly seated; lack of anti-slip features. | Ensure the mattress is centered. The bed frame features an anti-slip design to prevent mattress movement. |
| LED 조명이 작동하지 않습니다. | Power connection issue; remote control battery dead; LED strip damage. | Check if the power adapter is securely plugged in. Replace the remote control battery. If issues persist, contact customer support. |
| 침대 프레임이 불안정하게 느껴집니다. | 조립이 불완전하거나 잘못되었거나, 연결 부위가 헐거워졌습니다. | Review assembly instructions and ensure all components are correctly installed and all fasteners are tightened. Do not exceed the 800lb weight capacity. |
Image: Features designed to prevent noise and mattress slipping.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 랩1 |
| 크기 | 가득한 |
| 제품 크기(L x W x H) | 71.6인치 x 56.3인치 x 42.9인치 |
| 중량 용량 | 800파운드 |
| 재료 | Metal, PE Rattan Cane |
| 색상 | Led Rattan Black |
| 헤드보드 소재 | 등나무 |
| 지면에서 물품까지의 거리(침대 밑 여유 공간) | 11 인치 |
| 특별 기능 | No Box Spring Needed, Rattan Headboard with LED Light, Squeak Resistant |
| 호환되는 매트리스 높이 | 8" - 12" (recommended) |
Image: Full size bed frame dimensions and weight capacity.
Image: Illustration of the 11-inch under-bed storage space.
보증 및 지원
반품 정책:
This product is eligible for a 90-day return policy for refund or replacement. Please refer to your purchase platform's specific return guidelines for detailed information.
고객 지원:
For any questions, missing parts, or assistance with assembly and operation, please contact GAOMON customer support. You can typically find contact information on the seller's page or through your purchase order details.
Note: Protection plans may be available for extended coverage. Check your purchase options for details.
