1. 서론
The Sensative Strips Drip Z-Wave 800 is an ultra-thin water leak and temperature sensor designed for smart home environments. It utilizes Z-Wave 800 technology to detect water leaks and monitor ambient temperatures, providing timely notifications to your Z-Wave controller. Its slim design allows for discreet placement in hard-to-reach areas, offering comprehensive monitoring for potential water damage or freezing conditions.
2. 안전 정보
- Do not attempt to open or modify the sensor. Internal components are not user-serviceable.
- Keep the sensor away from direct heat sources or open flames.
- Ensure the sensor is installed in a location where it will not be physically damaged or submerged in water beyond its intended detection area.
- Dispose of the product and its battery according to local regulations. Do not incinerate.
- The provided magnet is for setup and reset purposes only. Keep it away from children.
3. 패키지 내용
패키지에 다음 품목이 포함되어 있는지 확인하십시오.
- Sensative Strips Drip Sensor
- Magnet (for setup)
- 빠른 시작 가이드(본 설명서)
Image: The Sensative Strips Drip sensor shown in its retail packaging, which includes the sensor and a small magnet.
4. 제품 오버view
The Sensative Strips Drip sensor is designed to be discreet and highly functional. It features an ultra-thin profile, allowing it to be placed in tight spaces where traditional sensors cannot fit. The sensor detects water presence across its length and reports ambient temperature.
주요 특징:
- 물 누수 감지: Senses water on most hard surfaces in 1-100% increments.
- 온도 모니터링: Reports ambient room temperature.
- Z-Wave 800 Technology: Extended wireless range and enhanced security (S2 and Secure Vault).
- 긴 배터리 수명: Up to 10 years with the built-in LiMnO2 battery.
- 범용 설치: 실내 및 실외 애플리케이션에 적합합니다.
5. 설정
To set up your Sensative Strips Drip sensor, you will need a compatible Z-Wave controller or hub (sold separately). The sensor uses a magnet for activation and pairing.
5.1. Adding the Sensor to Your Z-Wave Network (Inclusion)
- Prepare your Z-Wave Controller: Z-Wave 컨트롤러를 연결(페어링) 모드로 설정하십시오. 자세한 지침은 컨트롤러 설명서를 참조하십시오.
- 센서 활성화: Hold the provided magnet against the marked area on the sensor (usually indicated by a small indentation or symbol) for approximately 3 seconds, then remove it. The sensor's LED (if visible) may blink to indicate activation.
- Confirm Inclusion: Your Z-Wave controller should detect and add the sensor. If successful, the controller will confirm the inclusion. The sensor may appear as multiple devices (e.g., leak sensor, temperature sensor, brightness sensor) depending on your controller's capabilities.
- Smart Start (if supported): If your Z-Wave controller supports Smart Start, you can scan the QR code on the sensor or its packaging to automatically add it to your network.
메모: The timing of holding and removing the magnet is crucial. If inclusion fails, repeat the process. Some Z-Wave hubs may require several attempts due to timing sensitivities.
5.2. 배치 추천
The ultra-thin design allows for flexible placement. Consider areas prone to leaks or where temperature monitoring is critical.
- 싱크대 아래 (주방, 욕실)
- 화장실 뒤편
- 온수기 근처
- 세탁기나 식기세척기 아래에
- 지하실이나 다용도실
- Near pipes that may freeze
Image: The thin Sensative Strips Drip sensor positioned on the floor directly in front of a washing machine, illustrating discreet placement for leak detection.
Image: The Sensative Strips Drip sensor lying on the cabinet floor under a kitchen sink, near plumbing, demonstrating its use in a common leak-prone area.
6. 센서 작동
Once successfully included in your Z-Wave network, the Strips Drip sensor will automatically begin monitoring for water leaks and reporting temperature data.
6.1. Water Leak Detection
When water comes into contact with the sensor's detection strip, it will trigger a leak alarm. This alarm is sent to your Z-Wave controller, which can then execute predefined actions (e.g., send notifications, activate a siren, shut off a water valve if integrated).
메모: The sensor's felt strip requires a few seconds to absorb water before triggering. This is normal operation.
6.2. 온도 모니터링
The sensor continuously monitors the ambient temperature in its vicinity and reports this data to your Z-Wave controller at regular intervals (default wake-up interval is 24 hours, but can be configured). You can use this information to monitor for extreme temperatures that could indicate freezing pipes or other issues.
Image: A smartphone screen displaying a smart home application interface, showing a "Water Leak Detected" alert and a temperature reading of 21°C, with the Sensative Strips Drip sensor visible under a sink in the background.
7. 유지관리
7.1. 배터리 수명
The Sensative Strips Drip sensor is equipped with a built-in LiMnO2 battery designed to last up to 10 years under normal operating conditions. The battery is not replaceable by the user. When the battery is low, the sensor will report its status to your Z-Wave controller.
7.2. 청소
If the sensor becomes dirty, gently wipe it with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the sensor is dry before placing it back in its monitoring location.
8. 문제 해결
If you encounter issues with your Sensative Strips Drip sensor, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Sensor not pairing with Z-Wave controller. | Incorrect timing during inclusion, sensor too far from controller, controller not in inclusion mode. |
|
| No leak alerts received. | Sensor not properly included, communication issue, water not reaching detection strip, controller configuration. |
|
| Temperature readings are inaccurate or not updating. | Sensor placed in an area with fluctuating temperatures, long wake-up interval, communication issue. |
|
| Sensor battery appears to drain quickly. | Frequent reporting, poor network signal requiring more power, extreme temperatures. |
|
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 11040321 |
| Z-Wave 버전 | 800 Series (Z-Wave Plus v3) |
| 빈도 | 915MHz |
| Z-Wave 보안 | S2 and Secure Vault |
| 전원 공급 장치 | Built-in LiMnO2 battery |
| 배터리 수명 | 최대 10년 |
| 작동 조건 | -20 ~ 60°C (-4 ~ 140°F) |
| 온도 정확도 | ± 2 °C between -20 to 0°C (-4 to 32°F) ± 1 °C between 0 to 30°C (32 to 86°F) ± 2 °C between 30 to 60°C (86 to 140°F) |
| 무선 범위(직선 거리) | 최대 390미터(120피트) |
| Wireless Range (Z-Wave Network) | 최대 1640미터(500피트) |
| Wireless Range (Z-Wave LR) | 최대 2620미터(800피트) |
| 치수(센서) | 195 H x 15 W x 3 D mm (7.68 H x 0.59 W x 0.11 D in) |
| Wake Up Intervals | 30 minutes to 24 hours (default 24H) |
10. 보증 및 지원
For warranty information and technical support, please refer to the official Sensative web해당 웹사이트를 방문하거나 고객 서비스 센터에 직접 문의하십시오. 문의 사항이 있을 경우를 대비하여 구매 영수증과 제품 모델 번호(11040321)를 보관해 두십시오.
제조업체: 감각적
Web대지: www.sensative.com
