GOLUMUP Hydroponics Growing System

1. 서론

Thank you for choosing the GOLUMUP Hydroponics Growing System. This system allows you to cultivate herbs, vegetables, and flowers indoors without soil, providing an efficient and clean gardening experience. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your hydroponic garden to ensure optimal plant growth.

The GOLUMUP Hydroponics Growing System, featuring a white base, LED grow light, and multiple plant pods for indoor herb and vegetable cultivation.

2. 제품 구성품

Before assembly, please ensure all components are present and undamaged. Refer to the diagram below for identification.

• LED 조명 패널
• Lamp 확장 폴
• Germination Basket Kit (12 pods, no seeds included)
• Water Opening
• 수조
• 물 펌프
• 수위 표시기
• 전원 공급 장치

폭발 view diagram illustrating the main components of the hydroponics system, including the LED light panel, lamp extension, germination basket kit, water opening, water tank, water pump, water level indicator, and power supply.

3. 설정 지침

Follow these steps to set up your GOLUMUP Hydroponics Growing System:

1. 본체를 설치하세요: Assemble the LED light panel onto the lamp extension pole, then insert the pole into the base unit. Ensure it is securely fitted.
2. Mount Germination Basket Kit: Place the germination baskets into the designated holes on the top cover of the water tank. Insert your chosen seeds into the grow sponges within these baskets.
3. 물과 영양분을 첨가하세요: Open the water opening and fill the water tank with 0.5-1 liter of clean water. Add 1 gram of hydroponic nutrient solution (not included) per liter of water. Do not exceed the 'MAX' fill line on the water level indicator.
4. Connect Power and Select Mode: Plug in the power supply. Press the power button on the control panel and select your desired growth mode to start your garden.

A visual guide demonstrating the four primary setup steps: installing the main unit, mounting the germination basket kit, adding water and nutrients, and selecting a growth mode.

4. 사용 설명서

The GOLUMUP Hydroponics System features a smart control panel for easy operation.

제어판 기능:

The control panel of the hydroponics system, showing buttons for power, growth modes, light intensity, timer settings, pump cycle, and mute function.

• 켜기/끄기 버튼: 시스템의 전원을 켜거나 끕니다.
• Growth Modes: Select from 4 growth modes:
  • Sprout: For initial germination.
  • 시드 : For young plants.
  • 개화: For plants producing flowers or fruits.
  • Ripening: 마지막 s를 위해tage of fruit development.
• 가벼운 밝기: Adjust light intensity (Low/High).
• 타이머 모드: Set the light cycle duration (8H, 10H, 12H). The system will automatically turn off after the set time and turn on again at the same time the next day.
• Pump Cycle: Controls the water pump operation.
• 무음: Silences system alerts.

수위 표시기:

Monitor the water level using the indicator on the side of the unit. Refill water when it drops below the minimum line. The system may also provide a water shortag전자 알림.

5. Plant Growth Guidance

For optimal plant development, consider the following guidance:

• Nutrient Management: Regularly check the water level and replenish water and nutrients as needed. The frequency depends on plant type and growth stage.
• 라이트 패널 조정: As plants grow taller, adjust the height of the LED light panel to ensure all leaves receive adequate light. The light panel should be positioned a few inches above the tallest plants.
• 전정: Prune your plants regularly to encourage bushier growth and prevent overcrowding.

A visual timeline depicting the growth progression of plants from sprouting to mature stages, emphasizing the importance of adjusting the LED light panel height to cover all leaves as plants grow.

그림으로 보여줌asing various herbs and vegetables such as basil, arugula, spinach, oregano, stevia, mizuna, rosemary, cherry tomato, strawberry, and chili, which can be successfully cultivated using this hydroponic system.

6. 유지관리

Regular maintenance ensures the longevity and efficiency of your hydroponics system.

• 물탱크 청소: It is recommended to clean the water tank every 2-4 weeks, especially when changing plant cycles or if algae growth is observed. Empty the old water, rinse the tank thoroughly with clean water, and refill with fresh water and nutrients.
• Nutrient Solution Replacement: Replace the entire nutrient solution every 2-3 weeks to ensure plants receive a balanced supply of minerals. Simply topping off with water is not sufficient for long-term health.
• 펌프 유지보수: Periodically check the water pump for any blockages from plant debris or nutrient residue. Clean the pump filter if accessible, following manufacturer guidelines.
• Light Panel Cleaning: Gently wipe the LED light panel with a dry or slightly damp cloth to remove dust and ensure maximum light output.

7. 문제 해결

If you encounter issues with your GOLUMUP Hydroponics System, refer to the following common problems and solutions:

• LED 조명이 작동하지 않음:
  • Ensure the power supply is securely plugged into both the unit and a working electrical outlet.
  • Check if the light timer mode is correctly set. The light will turn off during its programmed dark cycle.
  • If the light is completely unresponsive, try unplugging and re-plugging the unit to reset it.
• 펌프가 작동하지 않습니다:
  • Verify that the water level is above the minimum line. The pump may not activate if the water level is too low.
  • Check for any blockages in the pump or tubing. Clean if necessary.
  • Ensure the pump cycle setting is active on the control panel.
• Plants Not Growing / Yellowing Leaves:
  • Nutrient Deficiency: Ensure you are using appropriate hydroponic nutrients and replacing the solution regularly (every 2-3 weeks).
  • 빛 부족: Adjust the LED light panel closer to the plants and ensure the light duration is appropriate for the plant type (e.g., 12-16 hours for most leafy greens).
  • 물의 질: Use clean, filtered water. Tap water can sometimes contain chlorine or other chemicals that may harm plants.
  • 온도/습도: Maintain a suitable room temperature (typically 20-25°C) and moderate humidity for optimal growth.
• Automatic Timer Function Failure:
  • Ensure the system is not experiencing power interruptions. Even brief power outages can disrupt the timer.
  • Try resetting the timer by turning the unit off and on, then re-selecting your desired light cycle.
  • 문제가 지속되면 고객 지원에 문의하십시오.

8. 사양

9. 보증 및 지원

For warranty information or technical support, please refer to the documentation included with your purchase or contact GOLUMUP customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.