1. 서론
This manual provides comprehensive instructions for the operation and maintenance of your OBSBOT Tail Series Smart Remote Controller. This device is designed to enhance your control over compatible OBSBOT Tail series cameras, including Tail 2 and Tail Air, offering precise Pan-Tilt-Zoom (PTZ) functionality and other advanced features.
2. 제품 오버view
The OBSBOT Tail Series Smart Remote Controller features an intuitive layout for seamless interaction with your camera. Below is a visual guide to its components and controls.
그림 2.1: 전면 view of the OBSBOT Tail Series Smart Remote Controller.
Figure 2.2: Labeled diagram of the remote controller's buttons and features.
- Device ON/OFF Button: Powers the remote controller on or off.
- Multi-screen Mode Button: 다양한 표시 모드 간에 전환합니다.
- 상태 표시기: Displays the current status of the remote controller.
- Focus / Camera Button: Controls camera focus or switches camera modes.
- 녹음 버튼: 동영상 녹화를 시작하거나 중지합니다.
- Gimbal Control Joystick: Provides precise control over the camera's pan, tilt, and zoom.
- Human Tracking Button: Activates human subject tracking.
- Animal Tracking Button: Activates animal subject tracking.
- Laser Close-up Button: Double-press to activate the laser pointer for quick close-up tracking.
- Preset Positions (P1, P2, P3): Stores and recalls up to three custom camera positions.
- Select Camera (1, 2, 3): Switches control between up to three paired OBSBOT Tail series devices.
- 사용자 정의 버튼: A programmable button for user-defined functions.
- Zoom Button (T/W): Rocker switch for zooming in (T) or out (W).
- 잠금 버튼: 실수로 버튼을 누르는 것을 방지합니다.
- USB-C 포트: For charging the remote controller.
3. 설정 및 페어링
3.1 리모컨 충전하기
Before initial use, ensure the remote controller is fully charged. Connect the supplied USB-A to USB-C cable to the USB-C port on the side of the remote controller and to a compatible USB power source.
Figure 3.1: USB-C charging port location on the remote controller.
3.2 Pairing with OBSBOT Tail Series Camera
The remote controller can be wirelessly connected to up to three OBSBOT Tail series devices via Bluetooth. Follow these steps to pair your remote controller with your camera:
- Ensure your OBSBOT Tail series camera (e.g., Tail 2/Air) is powered on.
- On the camera, quickly press the power button three times. The camera's indicator light will begin to flash blue, indicating it is in pairing mode.
- On the remote controller, press and hold the Human Tracking button (person icon) and the '1' button simultaneously. The remote's indicator light will also flash blue.
- Once successfully paired, both the camera and remote controller indicator lights will turn green.
- To pair additional cameras (up to three), repeat steps 2 and 3, using the '2' or '3' button on the remote controller for each subsequent camera.
Video 3.2: Official demonstration of OBSBOT Tail Air Remote Controller features, including pairing and control. This video is provided by the seller.
Note: If the remote is unresponsive, check the lock switch on the side. Slide it to the unlocked position to enable control.
Figure 3.3: Remote controller lock switch in locked (red) and unlocked positions.
4. 사용 설명서
4.1 PTZ 제어
The remote offers two methods for PTZ control:
- 조이스틱 제어: Use the central joystick to pan, tilt, and zoom the camera.
- Wrist Movements (Motion Control): With the built-in gyroscope, you can control the camera's gimbal by moving your wrist while holding down the joystick.
Figure 4.1: Demonstrating joystick control for camera movement.
4.2 Tracking Functions
- 인간 추적: Press the button with the 'person' icon to activate human subject tracking.
- Animal Tracking: Press the button with the 'paw print' icon to activate animal subject tracking.
- Laser Close-up: Double-press the Laser Close-up button. The camera will instantly follow and zoom in on the area pointed by the remote's laser.
4.3 사전 설정 위치
The remote allows you to save and recall up to three camera positions:
- 사전 설정 저장: Position the camera as desired, then press and hold one of the P1, P2, or P3 buttons until the indicator confirms the position is saved.
- 사전 설정 불러오기: Briefly press the desired P1, P2, or P3 button to move the camera to the saved position.
4.4개의 사용자 정의 버튼
The Custom Button can be configured via the OBSBOT app to perform a specific function tailored to your needs.
Figure 4.2: Location of the customizable button.
5. 유지관리
- 청소: 리모컨을 닦을 때는 부드럽고 마른 천을 사용하십시오. 강한 화학 약품이나 연마성 재질은 사용하지 마십시오.
- 저장: 리모컨은 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.
- 배터리 관리 : To prolong battery life, avoid fully discharging the remote frequently. Charge it regularly, even if not in constant use.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 리모컨이 응답하지 않습니다. | Remote is locked. | Check the lock switch on the side of the remote and slide it to the unlocked position. |
| Unable to pair with camera. | Camera or remote not in pairing mode; out of range. | Ensure both devices are powered on and in pairing mode (camera indicator flashing blue, remote indicator flashing blue). Bring devices closer together. |
| PTZ control is erratic or unresponsive. | Low battery; interference; remote not properly paired. | Charge the remote. Re-pair the remote with the camera. Ensure no strong wireless interference. |
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 제품 치수 | 7.9 x 4.8 x 6.3 인치 |
| 품목 무게 | 7.4 온스 |
| 품목 모델 번호 | OBSBOT_TAIL SERIES_REMOTE |
| 상표 | 옵스봇 |
| 특징 | 충전식 |
| 색상 | 검은색 |
| 지원되는 최대 장치 수 | 3 |
| 호환 장치 | Tail Series (Tail 2/ Tail Air) |
8. 보증 및 지원
For warranty information and technical support, please refer to the official OBSBOT web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 영수증을 보관하세요.
