1. 서론
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Total TGT616152 1600W Electric Lawn Mower. Please read these instructions carefully before using the appliance and keep them for future reference.
The Total TGT616152 1600W Electric Lawn Mower is a powerful and convenient gardening tool designed for cutting grass. It features a robust carbon brush motor and a 0.35-meter power cable, ensuring efficient and reliable performance. With its 3-stage cutting height adjustment (28mm, 48mm, and 68mm), you can easily achieve your desired grass length. The mower operates at 220-240V, 50/60Hz, delivering 1600W input power and a no-load speed of 3500 RPM. For user convenience, it includes a 45-liter grass collection box. The cutting width is 380mm, providing versatility for various garden maintenance needs.
Figure 1: Total TGT616152 1600W Electric Lawn Mower. This image shows the complete lawn mower with its handle and grass collection box.
2. 안전 지침
경고: 모든 안전 경고와 지침을 읽으십시오. 경고 및 지침을 따르지 않으면 감전, 화재 및/또는 심각한 부상을 입을 수 있습니다.
- 일반 안전: Keep children and bystanders away while operating the lawn mower. Never allow children or people unfamiliar with these instructions to use the lawn mower.
- 전기 안전: 전원 공급 장치가 볼륨과 일치하는지 확인하십시오.tage specified on the rating label. Always use a residual current device (RCD) with a tripping current of not more than 30 mA. Do not operate the lawn mower in wet conditions or rain. Inspect the power cable for damage before each use.
- 개인 안전: Always wear appropriate personal protective equipment (PPE), including safety glasses, sturdy footwear, and long trousers. Do not operate the lawn mower when barefoot or wearing open sandals.
- 안전 운전: Before starting, clear the area of objects such as stones, sticks, wires, and bones that could be thrown by the blades. Always maintain a firm grip on the handles. Do not overreach. Always be sure of your footing on slopes. Mow across the face of slopes, never up and down.
- 유지보수 안전: Disconnect the power plug from the mains before cleaning, adjusting, or performing any maintenance. Ensure the blade has stopped completely before touching it.
3. 패키지 내용
상자를 조심스럽게 개봉하여 모든 구성품이 있는지, 손상되지 않았는지 확인하십시오. 누락되거나 손상된 부품이 있는 경우 즉시 판매점에 문의하십시오.
- 1 x Total TGT616152 1600W Electric Lawn Mower unit
- 1 x Grass collection box (assembly required)
- 1 x 핸들 어셈블리
- 1 x 사용자 매뉴얼(이 문서)
4. 설치 및 조립
4.1. 핸들 조립
- Attach the lower handle sections to the main mower body using the provided bolts and knobs. Ensure they are securely fastened.
- Connect the upper handle section to the lower handle sections. Align the holes and secure with the remaining bolts and knobs. Ensure the power cable is routed correctly and not pinched.
4.2. 잔디 수집 상자 조립
The grass collection box typically comes in several parts that need to be clicked or screwed together. Follow the diagrams in the separate assembly sheet (if provided) or the intuitive locking mechanisms to assemble the box. Once assembled, hook the grass box onto the rear of the mower.
4.3. 초기 점검
- 모든 패스너가 단단히 고정되어 있는지 확인하세요.
- Check that the blade is securely attached and not damaged.
- Verify that the power cable is free from cuts or abrasions.
5. 사용 설명서
5.1. 절단 높이 조정
The Total TGT616152 offers 3 cutting height settings: 28mm, 48mm, and 68mm. To adjust the cutting height:
- 잔디 깎는 기계의 전원이 꺼져 있고 전원 공급 장치에서 분리되어 있는지 확인하세요.
- Locate the cutting height adjustment lever or mechanism, usually found near the wheels or on the main body.
- Move the lever to the desired height setting (28mm for a short cut, 48mm for medium, 68mm for a longer cut). Ensure it locks securely into place.
5.2. 잔디깎이 시동 걸기
- Connect the power cable to a suitable outdoor power outlet (ensure it has RCD protection).
- Press and hold the safety button (if present) and then pull the operating lever towards the handle. The motor will start.
- Release the safety button, but keep the operating lever held to continue operation.
5.3. 예초 기술
- Always start mowing from the edge of the lawn and work inwards in parallel lines.
- 균일한 절단을 위해 각 절단 구간을 약간씩 겹치도록 하십시오.
- Avoid overloading the motor by pushing too fast or attempting to cut excessively long grass in one pass. Raise the cutting height for very long grass and make multiple passes if necessary.
- Regularly check and empty the grass collection box to maintain optimal performance.
5.4. Stopping the Lawn Mower
Release the operating lever. The motor will stop, and the blade will cease rotation within a few seconds. Disconnect the power plug from the mains after use.
6. 유지관리
WARNING: Always disconnect the power supply before performing any maintenance or cleaning.
6.1. 청소
- After each use, clean the exterior of the mower with a damp 옷감. 강한 세제나 용제를 사용하지 마세요.
- Remove any grass clippings or debris from the underside of the deck and around the blade using a brush or scraper. Be careful of the sharp blade.
- Clean the grass collection box thoroughly.
6.2. 블레이드 관리
- Regularly inspect the blade for sharpness and damage. A dull or damaged blade can lead to poor cutting performance and strain the motor.
- If the blade is dull, it can be sharpened by a qualified service technician. If it is bent or severely damaged, it must be replaced with an original Total replacement blade.
6.3. 보관
- 잔디깎이 기계는 직사광선과 습기를 피해 건조하고 통풍이 잘 되는 곳에 보관하십시오.
- Ensure the mower is clean before storing.
- For compact storage, the handle can often be folded down.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 잔디 깎는 기계가 시동되지 않습니다. | 전원 공급이 없습니다. 안전 스위치가 작동되지 않았습니다. 과부하 보호가 활성화되었습니다. | 전원 연결 상태와 누전차단기를 확인하십시오. Ensure safety button and operating lever are correctly engaged. Disconnect from power, wait a few minutes, then restart. |
| 절단 성능이 좋지 않습니다. | 날이 둔해지거나 손상됨. 잔디 종류에 비해 깎는 높이가 너무 낮습니다. Grass collection box full. | 칼날을 검사하여 교체/날을 갈으세요. 절단 높이를 조정합니다. Empty grass collection box. |
| 과도한 진동. | 손상되었거나 균형이 맞지 않는 날. 느슨한 패스너. | 칼날의 손상 여부를 점검하고 필요시 교체하십시오. Check and tighten all bolts and nuts. |
If the problem persists after attempting these solutions, please contact Total customer support or a qualified service center.
8. 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | TGT616152 |
| 상표 | 총 |
| 입력 전원 | 1600와트 |
| 권tage | 220-240V ~ 50/60Hz |
| 무부하 속도 | 3500 RPM |
| 절단 폭 | 380mm (XNUMXmm) |
| 절단 높이 조정 | 3 positions (28mm, 48mm, 68mm) |
| 잔디 상자 용량 | 45리터 |
| 케이블 길이 | 0.35 미터 |
| 모터 유형 | Carbon Brush Motor |
| 제품 크기(L x W x H) | 90 x 34 x 65cm |
| 품목 무게 | 9kg |
| 재료 | 금속 |
| 전원 | AC Powered (220-240V) |
9. 보증 및 지원
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Total web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.
Contact information for Total customer service can typically be found on the product packaging or the manufacturer's official web대지.
