1. 안전 지침
이 전동 공구와 함께 제공되는 모든 안전 경고, 지침, 그림 및 사양을 항상 읽고 이해하십시오. 아래 나열된 모든 지침을 따르지 않으면 감전, 화재 및/또는 심각한 부상이 발생할 수 있습니다.
- 전기 안전: 전원 공급 장치가 볼륨과 일치하는지 확인하십시오.tage specified on the dust extractor. Do not operate in wet conditions or near flammable liquids/gases.
- 개인 보호 장비(PPE): Always wear appropriate PPE, including safety glasses, hearing protection, and a dust mask, especially when working with fine dust.
- 적절한 사용: Use the dust extractor only for its intended purpose. Do not use it to pick up hot ashes, sharp objects, or hazardous materials without proper precautions.
- 유지: Disconnect from power before performing any maintenance or cleaning. Regularly inspect the hose, filters, and power cord for damage.
2. 제품 오버view
The Fein Turbo II X AC PRO is a high-performance wet/dry dust extractor designed for professional use. It features a powerful motor, automatic filter cleaning, and HEPA filtration for efficient dust and liquid collection. Its robust construction and thoughtful design ensure durability and ease of use in demanding environments.
A worker uses the Fein Turbo II X AC PRO wet/dry dust extractor to clean a tiled floor, demonstrating its powerful suction for general cleanup.
3. 설치 및 조립
Follow these steps to set up your Fein Turbo II X AC PRO dust extractor:
- 짐 풀기: 모든 구성품을 포장에서 조심스럽게 꺼내세요. 손상 여부를 확인하세요.
- 필터 설치 : Ensure the HEPA filter is correctly installed. For dry vacuuming, a filter bag is recommended.
- 호스 연결: Attach the anti-static suction hose to the inlet port on the front of the unit. Ensure a secure connection.
- 액세서리 부착: Connect the desired accessory (e.g., extension tubes, floor nozzle) to the end of the suction hose.
- 전원 연결: 전원 코드를 적합한 콘센트에 꽂으세요.
This image highlights the premium HEPA filter feature of the Fein Turbo II X AC PRO, essential for capturing fine dust particles and maintaining air quality.
This video demonstrates the setup process for the Fein Turbo I (similar to Turbo II X AC PRO), including filter installation, hose connection, and power tool integration. It also showcases the unit's high suction power, low noise level, and mobility.
4. 사용 설명서
The Fein Turbo II X AC PRO offers versatile operation for various cleaning tasks:
- 전원 켜기/끄기: 주 전원 스위치를 사용하여 장치를 켜거나 끕니다.
- Autostart Function: For synchronized operation with power tools, plug your tool into the integrated autostart outlet. The dust extractor will activate automatically when the power tool is switched on, with a slight delay to prevent current overload.
- 습식 진공청소기: When vacuuming liquids, ensure the filter bag is removed and the HEPA filter is suitable for wet use or replaced with a wet filter. Monitor the liquid level to prevent overfilling.
- 건식 진공청소기: For dry debris, use the HEPA filter and a disposal bag for optimal collection and easy disposal.
- 흡입 제어: Adjust the suction power using the rotary knob on the control panel to match the task requirements.
The Fein Turbo II X AC PRO dust extractor is connected to a power tool, actively collecting dust during a woodworking task, highlighting its integration with other tools.
This video demonstrates the setup process for the Fein Turbo I (similar to Turbo II X AC PRO), including filter installation, hose connection, and power tool integration. It also showcases the unit's high suction power, low noise level, and mobility.
5. 유지관리
Regular maintenance ensures optimal performance and longevity of your dust extractor:
- Automatic Filter Cleaning (AC): The unit features a fully automatic filter cleaning system. This system periodically pulses to dislodge dust from the filter, maintaining consistent suction.
- 필터 교체: Replace the HEPA filter periodically or when suction significantly decreases despite automatic cleaning. Refer to the filter type for specific replacement intervals.
- Disposal Bag: For dry vacuuming, use disposal bags. Replace them when full to prevent loss of suction and maintain hygiene.
- 용기 세척: Empty and clean the collection container regularly, especially after wet vacuuming, to prevent odors and bacterial growth.
- 액세서리 보관: Utilize the practical accessory storage on the unit to keep tools organized and protected.
The image shows the Fein Turbo II X AC PRO dust extractor, emphasizing its fully automatic filter cleaning system, which helps maintain optimal suction and extends filter life.
The dust extractor features practical on-board storage for accessories, keeping them organized and readily accessible during use.
6. 문제 해결
If you encounter issues with your Fein Turbo II X AC PRO, refer to the following common troubleshooting steps:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원이 없습니다 | 전원 코드가 뽑혔거나, 회로 차단기가 작동했거나, 콘센트에 결함이 있습니다. | 전원 연결을 확인하고, 회로 차단기를 재설정하고, 다른 콘센트를 사용해 보세요. |
| 흡입력 상실 | Clogged hose/nozzle, full filter bag, dirty HEPA filter, container full (wet vacuuming). | Clear obstructions, replace filter bag, clean/replace HEPA filter, empty container. |
| 비정상적인 소음 | Foreign object in impeller, loose components, motor issue. | Disconnect power and inspect for foreign objects. If noise persists, contact customer support. |
| 먼지 탈출 | Improperly installed filter, damaged filter, loose hose connection. | Ensure filter is seated correctly, replace damaged filter, tighten hose connections. |
7. 사양
Key technical specifications for the Fein Turbo II X AC PRO:
| 특징 | 사양 |
|---|---|
| 상표 | 페인 |
| 모델명 | Turbo II X AC PRO |
| 용량 | 9.2갤런(약 34.8리터) |
| 공기 흐름 (CFM) | 153 퀴놀론 |
| Static Water Lift (PSI) | 98 PSI (approx. 245 mbar) |
| 모터 마력 | 1.47마력 |
| 필터 유형 | HEPA 필터 |
| 호스 길이 | 13 피트 |
| 전원 코드 길이 | 25 피트 |
| 소음 수준 | 70데시벨 |
| 제품 치수 | 10"L x 10"W x 10"H (Note: These dimensions seem generic and may not reflect the actual product size accurately.) |
| 품목 무게 | 25파운드 |
| 포함된 구성 요소 | Accessory Kit (HEPA filter, anti-static suction hose, metal extension tubes, disposal bag, crevice nozzle, dusting brush, combination tool with inserts, elbow) |
This graphic illustrates the key benefits of the Fein Turbo II X AC PRO: powerful suction (153 CFM, 98.4 Static Waterlift), easy 360-degree rotation, and a large 9.2-gallon container volume.
A visual representation of the comprehensive accessory kit provided with the dust extractor, including metal extension tubes, a combination nozzle, crevice nozzle, elbow, and dusting brush for diverse cleaning needs.
상세한 도표는 다음을 보여줍니다.asing a range of additional accessories available for Fein Turbo dust extractors, including different filter bags, hoses, and specialized nozzles, all sold separately.
8. 보증 및 지원
Fein products are manufactured to the highest quality standards. For warranty information and customer support, please refer to the official Fein web사이트 또는 고객 서비스 부서에 문의하십시오.
보증: This product typically comes with a manufacturer's warranty covering defects in materials and workmanship. Specific terms and duration may vary by region and purchase date. Please retain your proof of purchase for warranty claims.
고객 지원: For technical assistance, spare parts, or service, please visit the 아마존에서 Fein 스토어를 만나보세요 or the official Fein website. You can also find contact information for your local service center there.
