Inkbird ITC-C216T Thermostat Instruction Manual

소개

Thank you for choosing the Inkbird ITC-C216T Thermostat. This device is a versatile plug-and-play temperature controller designed for precise temperature management in a wide range of applications. It features three control modes: temperature, cycle time, and countdown, along with safety features like high/low temperature alarms and a child lock. This manual will guide you through the setup, operation, and maintenance of your thermostat to ensure optimal performance and safe use.

안전 정보

• Ensure the thermostat is connected to a grounded power outlet.
• Do not exceed the maximum load capacity of 10A, 220V AC (2200W).
• Keep the device away from water, except for the IP67 rated probe.
• 제품을 직접 분해하거나 수리하지 마십시오. 문제가 발생하면 고객 지원 센터에 문의하십시오.
• 청소 또는 유지 관리를 수행하기 전에 항상 장치의 플러그를 뽑으십시오.

제품 끝view

구성 요소

영상: Detailed diagram of the Inkbird ITC-C216T thermostat with labeled components.

1. LCD with White Backlight: Displays current and set temperatures/times.
2. Operational Buttons: MODE, UP, SET, DOWN for navigation and setting adjustments.
3. 산출: Max 10A (2200W at 220Vac) for connecting heating or cooling devices.
4. 온도 프로브: 2m/79in long, IP67 waterproof for accurate temperature detection.
5. 입력: 100~240Vac 50/60Hz max 10A.
6. 난방 아이콘: Indicates heating operation.
7. Cooling Icon: Indicates cooling operation.
8. 타이밍 아이콘: Indicates timing function is active.
9. 아동 잠금 아이콘: 어린이 보호 잠금 기능이 작동 중임을 나타냅니다.
10. 시작: Displays start temperature or time.
11. 멈추다: Displays stop temperature or time.

주요 특징

영상: The Inkbird ITC-C216T thermostat showcasing 주요 특징.

• 백라이트 LCD 디스플레이: Easy to read current and set values, even in low light.
• Three Control Modes: Temperature, Cycle Time, and Countdown.
• 광범위한 온도 범위: Controls temperatures from -40°C to 100°C.
• 고온/저온 경보: Customizable alarm values with an option to mute the buzzer.
• 온도 교정: Allows for fine-tuning temperature readings.
• Cooling Delay: Protects cooling equipment from short cycling.
• 아동 잠금: 실수로 설정이 변경되는 것을 방지합니다.
• 메모리 기능: Retains all settings after a power interruption.
• IP67 방수 프로브: Suitable for use in soil or submerged in water.

설정

1. 풀다: Carefully remove the thermostat and its components from the packaging.
2. 플러그인: Insert the thermostat into a standard 220V AC grounded power outlet. The LCD display will light up.
3. 장치 연결: Plug your heating or cooling device (e.g., heater, fan, refrigerator) into the output socket of the thermostat.
4. 위치 프로브: Place the waterproof temperature probe in the environment where temperature control is needed (e.g., terrarium, water, soil). Ensure the probe is securely positioned and not directly exposed to heating elements or strong air currents that could affect readings.

작동 모드

The ITC-C216T thermostat supports three main control modes: Temperature Mode, Cycle Time Mode, and Countdown Mode. Please note that Temperature Mode and Timing functions cannot be used simultaneously.

1. Temperature Mode

영상: Visual representation of the thermostat's cooling and heating functions.

In Temperature Mode, the thermostat automatically controls your connected device (heater or cooler) to maintain a desired temperature range. The device will operate in heating or cooling mode based on your set START and STOP temperatures.

• 를 누르세요 방법 button repeatedly until the display shows the temperature mode (usually indicated by a thermometer icon).
• 누르다 세트 to enter setting mode. The START temperature will flash. Use the UP 그리고 아래에 buttons to adjust the desired START temperature.
• 누르다 세트 again to confirm and move to the STOP temperature. Adjust the STOP temperature using UP 그리고 아래에.
• 누르다 세트 one more time to save the settings and exit.
• If START temperature is lower than STOP temperature, the thermostat operates in 난방 모드.
• If START temperature is higher than STOP temperature, the thermostat operates in 냉각 모드.

2. Cycle Time Mode (P01)

영상: Diagram explaining the Cycle Time Mode (P01) operation.

This mode allows you to set a repeating ON/OFF cycle for your connected device. The time range is 0 to 99 hours and 59 minutes.

• 누르다 방법 until P01 is displayed.
• 누르다 세트. The ON time will flash. Adjust using UP/아래에.
• 누르다 세트. The OFF time will flash. Adjust using UP/아래에.
• 누르다 세트 to save and exit. The device will now cycle ON and OFF according to your settings.

3. Countdown Mode (P02, P03, P04)

The Countdown Mode offers three sub-modes for specific timed operations:

• P02: Countdown ON
  

  영상: Diagram explaining the Countdown ON Mode (P02).

  The device will turn ON after the set countdown period.
• P03: Countdown OFF
  

  영상: Diagram explaining the Countdown OFF Mode (P03).

  The device will turn OFF after the set countdown period.
• P04: Countdown ON & OFF
  

  영상: Diagram explaining the Countdown ON&OFF Mode (P04).

  The device will turn ON after the first countdown, then turn OFF after a second countdown.

To set any Countdown Mode:

• 누르다 방법 until P02, P03, or P04 is displayed.
• 누르다 세트. The countdown time(s) will flash. Adjust using UP/아래에.
• 누르다 세트 저장하고 종료합니다.

고급 설정

온도 교정(CA)

영상: Thermostat screen showing temperature calibration setting.

If you find that the temperature reading is inaccurate compared to a known reference thermometer, you can calibrate the device:

• 기기의 전원이 켜진 상태에서 버튼을 길게 누르세요. 세트 button for approximately 3 seconds to enter the parameter settings.
• 사용하세요 UP/아래에 buttons to navigate to the 'CA' (Calibration) setting.
• 누르다 세트, 그런 다음 사용하세요 UP/아래에 to adjust the calibration value (e.g., +0.5°C or -0.5°C).
• 누르다 세트 확인하고 종료합니다.

Cooling Delay (Pt)

영상: Thermostat screen showing refrigeration delay setting.

The cooling delay function prevents rapid cycling of cooling equipment, which can extend its lifespan.

• Enter parameter settings (press and hold 세트 3초 동안).
• Navigate to 'Pt' (Cooling Delay).
• Adjust the delay time in minutes using UP/아래에.
• 누르다 세트 확인하고 종료합니다.

High/Low Temperature Alarms (AH/AL)

영상: Thermostat screen showing high temperature alarm with mute option.

Set custom high (AH) and low (AL) temperature alarm values. If the detected temperature exceeds these limits, an audible alarm will sound.

• Enter parameter settings.
• Navigate to 'AH' (High Alarm) or 'AL' (Low Alarm).
• Adjust the alarm temperature using UP/아래에.
• 누르다 세트 확인합니다.
• To mute the buzzer, press any button when the alarm sounds.

아동 잠금

영상: Thermostat displaying the child lock icon.

설정이 실수로 변경되는 것을 방지하려면 자녀 보호 기능을 활성화하세요.

• 를 누르고 계세요 UP 그리고 아래에 buttons simultaneously for approximately 3 seconds. The child lock icon will appear on the display.
• Repeat the action to unlock the device.

메모리 기능 및 공장 초기화

• 메모리 기능: The thermostat automatically saves all your settings. In case of a power outage, the device will resume operation with the last saved settings once power is restored.
• 공장 초기화 : To restore the device to its default factory settings, consult the full user manual or contact Inkbird support for specific instructions.

응용 프로그램

영상: Diverse applications of the Inkbird ITC-C216T thermostat.

The Inkbird ITC-C216T thermostat is suitable for a wide range of temperature control needs, including but not limited to:

• Reptile Terrariums and Aquariums
• Greenhouses and Plant Propagation
• Incubators for Eggs
• Home Brewing and Fermentation
• Controlling Freezers and Refrigerators
• Managing Heating Mats and other Home Appliances

명세서

문제 해결

If you encounter issues with your Inkbird ITC-C216T thermostat, please refer to the following common solutions:

• 디스플레이가 켜지지 않음: Ensure the thermostat is securely plugged into a live power outlet. Check the power supply.
• 부정확한 온도 측정: Verify the probe is correctly placed and not damaged. Perform a temperature calibration (refer to Advanced Settings).
• 장치가 켜지지 않거나 꺼지지 않음: Check if the connected heating/cooling device is functioning correctly. Ensure the thermostat is in the correct operating mode (Temperature, Cycle Time, or Countdown) and that settings are properly configured. Verify the child lock is not active.
• 알람이 계속 울립니다: Check the high/low alarm settings (AH/AL) and the current temperature. Adjust alarm values if necessary or mute the buzzer by pressing any button.
• 설정이 저장되지 않음: The device has a memory function. If settings are not retained, try a factory reset (consult full manual) or contact support.

For more detailed troubleshooting or persistent issues, please contact Inkbird customer support.

유지

• 청소: Disconnect the thermostat from power before cleaning. Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or immerse the main unit in water.
• 프로브 관리: Regularly inspect the temperature probe for any signs of damage. Clean the probe gently if it accumulates debris, especially if used in water or soil.
• 저장: 장기간 보관할 경우 기기를 깨끗하고 건조한 상태로 유지하십시오. 직사광선을 피해 서늘하고 건조한 곳에 보관하십시오.

보증 및 지원

Inkbird products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms, registration, or technical support, please visit the official Inkbird web사이트를 방문하거나 고객 서비스에 직접 문의하세요.

자세한 정보와 지원 리소스는 다음 사이트를 방문하여 확인할 수 있습니다. Amazon의 Inkbird Store.