소개
The Seagate Exos X24 series hard drives are designed for hyperscale environments, offering robust and reliable storage solutions for cloud data centers. This 24TB Enterprise Internal Hard Drive (ST24000NM002H) integrates advanced technology to meet stringent TCO requirements, providing consistent performance with low power consumption and weight. This manual provides essential information for the setup, operation, and maintenance of your Exos X24 hard drive.
주요 특징
- 확장 가능: Designed to run big data applications and meet hyperscale demands.
- 효율적인: 향상된 캐싱을 통해 낮은 지연 시간과 반복 가능한 응답 시간으로 일관된 성능을 제공합니다.
- 대용량: Supports data analytics capabilities and other dense architectures for maximum rack-space efficiency.
- 비용 효율성: Optimizes Total Cost of Ownership (TCO) with the lowest cost per terabyte.
- 믿을 수 있는: Offers extended reliability with a 2.5 million-hour Mean Time Between Failures (MTBF) and a 5-year limited warranty.
상자 안에 무엇이 들어있나요?
- Seagate Exos X24 24TB 엔터프라이즈 내장 하드 드라이브(ST24000NM002H)
Note: Additional cables (SATA data, SATA power) and mounting screws are typically not included and must be purchased separately.
설정
1. 물리적 설치
Before installation, ensure your system is powered off and unplugged. Handle the hard drive by its edges to avoid static discharge. Locate an available 3.5-inch drive bay in your desktop or server chassis.
- Carefully slide the hard drive into the drive bay until it clicks into place or aligns with the screw holes.
- Secure the drive using appropriate screws (typically four screws, two on each side) to prevent vibration.
- 하드 드라이브와 마더보드 또는 RAID 컨트롤러의 사용 가능한 SATA 포트에 SATA 데이터 케이블을 연결하십시오.
- Connect a SATA power cable from your power supply unit (PSU) to the hard drive's power connector.
이미지: 앞면 view of the Seagate Exos X24 hard drive, showing the SATA data and power connectors.
2. System Recognition and Formatting
After physical installation, power on your system. The operating system needs to recognize and prepare the new drive.
- Access your system's BIOS/UEFI settings to confirm the drive is detected. Ensure the SATA port is enabled.
- Boot into your operating system (Windows, Linux, macOS).
- Windows의 경우: Open Disk Management (right-click Start, select Disk Management). You should see the new drive listed as "Unallocated Space". Right-click on the drive, select "Initialize Disk", choose GPT (GUID Partition Table) for drives larger than 2TB, then create a "New Simple Volume" and format it (NTFS is recommended for Windows).
- Linux의 경우: Use tools like `fdisk`, `parted`, and `mkfs` to partition and format the drive.
- macOS의 경우: 디스크 유틸리티를 사용하여 드라이브를 지우고 포맷하십시오.
Note: Formatting a drive will erase all data on it. Ensure you select the correct drive.
하드 드라이브 작동
Once installed and formatted, your Seagate Exos X24 hard drive is ready for use. It functions like any other internal storage device, providing high-capacity, high-performance storage for your data.
- 데이터 저장: Use the drive to store large datasets, applications, and media files. Its 24TB capacity is ideal for demanding enterprise applications and data archiving.
- 성능: The 7200 RPM rotational speed and 6GB/s SATA interface ensure fast data transfer rates and responsive access times, suitable for data-intensive workloads.
- 연중무휴 운영: Designed for continuous operation in server and data center environments, ensuring consistent performance and reliability around the clock.
Image: A hand installing a Seagate Exos X24 hard drive into a server rack, illustrating its scalable design for 24x7 environments.
비디오: 제품이 끝났습니다view video for the Seagate Exos X24, highlighting its features and enterprise capabilities.
유지
Proper maintenance ensures the longevity and optimal performance of your hard drive.
- 정기 백업: Always maintain regular backups of critical data. While the Exos X24 is highly reliable, no storage device is immune to failure.
- 드라이브 상태 모니터링: Utilize S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) tools to monitor the drive's health status. Many operating systems and third-party utilities offer this functionality.
- 적절한 종료: Always shut down your system properly to prevent data corruption and mechanical stress on the drive. Avoid sudden power loss.
- 환경 제어: Ensure the operating environment maintains appropriate temperature and humidity levels, as specified in the product's technical documentation, to prevent overheating and condensation.
Image: Multiple Seagate Exos X24 hard drives in a server rack, emphasizing customizable power options for efficiency.
문제 해결
If you encounter issues with your Seagate Exos X24 hard drive, consider the following common troubleshooting steps:
- 드라이브가 감지되지 않음:
- Check all cable connections (SATA data and power) to ensure they are secure.
- Verify the SATA port is enabled in your system's BIOS/UEFI settings.
- Test the drive in a different SATA port or with different cables if possible.
- Ensure your operating system's Disk Management (Windows) or Disk Utility (macOS/Linux) recognizes the drive, even if unformatted.
- 느린 성능:
- 디스크 리소스를 소모하는 백그라운드 프로세스를 확인합니다.
- Ensure the drive is not excessively fragmented (for HDDs, defragmentation can improve performance).
- Verify that your SATA controller drivers are up to date.
- Monitor drive temperature; overheating can lead to performance throttling.
- 특이한 소음:
- A clicking, grinding, or loud humming sound can indicate a potential drive failure. Immediately back up any accessible data and consider replacing the drive.
- Some enterprise drives may produce more audible operational sounds than consumer drives due to their design for high performance and reliability in server environments.
- 데이터 손실:
- If data becomes inaccessible, avoid further operations on the drive to prevent overwriting.
- Seagate Exos drives often include Seagate Rescue Data Recovery Services. Refer to the warranty section or Seagate's official website for details on how to utilize this service.
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 시게이트 |
| 모델 번호 | ST24000NM002H |
| 디지털 저장 용량 | 24테라바이트 |
| 하드 디스크 인터페이스 | 직렬 연결 SCSI |
| 연결 기술 | SATA |
| 하드 디스크 폼 팩터 | 3.5 인치 |
| 하드 디스크 설명 | 기계식 하드 디스크 |
| 하드 드라이브 회전 속도 | 7200 RPM |
| 품목 무게 | 1.48파운드 |
| 제품 크기(LxWxH) | 5.79 x 4.01 x 1.03 인치 |
| MTBF(평균 고장 간격) | 2.5만 시간 |
| 특징 | 데이터 복구 서비스 |
보증 및 지원
한정 보증
The Seagate Exos X24 24TB Enterprise Internal Hard Drive (ST24000NM002H) is backed by a 5년 한정 보증. This warranty covers defects in materials and workmanship under normal use. For detailed terms and conditions, please refer to the official Seagate warranty statement available on their web사이트 또는 제품 설명서에 포함되어 있습니다.
Image: A badge indicating the Seagate 5-year limited warranty, symbolizing product reliability.
Seagate Rescue Data Recovery Services
Many Seagate drives, including the Exos X24, come with Seagate Rescue Data Recovery Services. This service helps protect your data against unexpected data loss due to mechanical failure, accidental deletion, or natural disaster. Activation and terms for this service can be found on the official Seagate web대지.
기술 지원
For technical assistance, driver downloads, firmware updates, or further product information, please visit the official Seagate support website. You can also contact Seagate customer support directly for personalized assistance.
- Official Seagate Web대지: www.seagate.com
- Seagate 지원: www.seagate.com/support
