1. 서론
Thank you for choosing a Bosch appliance. Your new washing machine is designed for efficiency and reliability. To ensure safe and optimal operation, please read this instruction manual thoroughly before first use and keep it for future reference.
This manual provides essential information on installation, operation, maintenance, and troubleshooting for your Bosch WAN2405MPL washing machine.
2. 안전 지침
Always observe the following safety instructions to prevent accidents and damage to the appliance.
- 전기 안전: Ensure the appliance is correctly earthed. Do not use extension cords or multi-plug adapters. Disconnect from power before cleaning or maintenance.
- 물 안전: Connect water hoses securely to prevent leaks. Do not use damaged hoses. The AquaStop function provides protection against water damage.
- 아동 안전: Keep children away from the appliance. Activate the child lock function to prevent accidental operation.
- 설치: 제품은 단단하고 평평한 표면에 설치해야 합니다. 사용 전에 모든 운송용 볼트를 제거하십시오.
- 작업: Do not overload the machine. Do not wash items that have been cleaned with flammable substances.
3. 설정 및 설치
3.1 풀기
Carefully remove the washing machine from its packaging. Remove all packaging materials, including the polystyrene base and any protective film. Inspect the appliance for any transport damage.
3.2 운송 볼트 제거
Before operating the machine, all four transport bolts at the rear of the appliance must be removed. These bolts secure the drum during transit. Failure to remove them will result in severe vibrations and damage.
3.3 위치 및 레벨링
Place the washing machine on a firm, flat, and stable floor. Use a spirit level to ensure the appliance is perfectly level. Adjust the feet of the machine as necessary. Proper leveling reduces noise and vibration during operation.
Image: The Bosch WAN2405MPL washing machine with its door open, ready for installation or loading in a typical laundry setting.
3.4 물 연결
Connect the cold water inlet hose to a tap with a 3/4" thread. Ensure the connection is tight to prevent leaks. Do not overtighten. The appliance features an AquaStop function for enhanced water safety.
3.5 배수 연결
Connect the drain hose to a standpipe or a siphon connection. Ensure the hose is not kinked or obstructed. The end of the drain hose must be positioned at a height between 60 cm and 100 cm from the floor.
3.6 전기 연결
Plug the appliance into a properly installed and earthed socket. The voltage (220-240 V) and frequency (50 Hz) must match the specifications of your household electrical supply. The cable length is 1.6 meters.
3.7 첫 번째 사용
Before washing laundry for the first time, run an empty wash cycle (e.g., Cotton 60°C) without laundry but with a small amount of detergent to clean the drum and remove any manufacturing residues.
4. 사용 설명서
4.1 제어판 이상view
The control panel features a rotary program selector, touch buttons for additional functions, and an integrated LED display for status information and remaining time.
이미지: 상세 view of the control panel, showing the program selector dial, display, and touch buttons.
4.2 세탁물 넣기
Open the door (hinged on the left) and load laundry into the drum. Do not overload the machine; the maximum capacity is 8 kg. Close the door firmly.
4.3 세제 추가
Pull out the detergent dispenser drawer. Add detergent and fabric softener to the appropriate compartments according to the manufacturer's instructions and the load size. Close the drawer.
4.4 프로그램 선택
Turn the rotary program selector to choose your desired wash program. Available programs include:
- 면
- 에코 40-60
- 합성품
- 섬세한/실크
- 양모
- 혼합
- 빠른 30분
- 빠른 15분
- 헹구기
- 회전
- 사전 세척
- Iron Assist (Steam program for wrinkle reduction)
- Specific temperature programs: 40°C, 60°C, 90°C, Daily 40°
4.5 Adjusting Program Settings
After selecting a program, you can adjust settings such as spin speed (max 1200 rpm) or add special functions using the touch buttons. The LED display will show the selected settings and the estimated remaining time.
4.6 세탁 주기 시작
Press the 'Start/Pause' button to begin the wash cycle. The machine will automatically detect the load and adjust water usage (automatic load control). The foam control system will prevent excessive foam build-up.
4.7 지연된 시작
You can delay the start of a program by up to 24 hours using the 'Delayed Start' function. This allows you to set the machine to finish at a convenient time.
4.8 세탁 주기 종료하기
Once the program is complete, the display will indicate 'End'. Open the door and remove your laundry. Leave the door slightly ajar to allow the drum to air dry.
5. 유지관리 및 관리
정기적인 유지관리는 세탁기의 수명과 최적의 성능을 보장합니다.
5.1 외부 청소
부드러운 천으로 기기 외부를 닦아주세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
5.2 세제 디스펜서 청소
Periodically remove and clean the detergent dispenser drawer under running water to prevent detergent residue build-up.
5.3 배수 펌프 필터 청소
The drain pump filter should be cleaned regularly (e.g., every 2-3 months) to remove lint and small objects. Refer to the diagram in your full manual for the exact location and procedure. Ensure the machine is switched off and unplugged before cleaning.
5.4 드럼 청소
Run a drum cleaning program (if available) or a hot wash cycle (e.g., Cotton 90°C) with no laundry and a descaling agent or washing machine cleaner to prevent odors and maintain hygiene.
5.5 겨울 보관
If the machine is to be stored in an area where temperatures may drop below freezing, ensure all water is drained from the hoses and pump to prevent damage from freezing.
6. 문제 해결
고객 서비스에 문의하기 전에 일반적인 문제에 대한 다음 해결 방법을 시도해 보세요.
- 기계가 시작되지 않음: Check if the power plug is inserted, the door is closed properly, and the 'Start/Pause' button has been pressed.
- 물 섭취 금지: Check if the water tap is open and the water inlet hose is not kinked.
- 물이 빠지지 않음: 배수 호스가 꼬이거나 막혔는지 확인하십시오. 배수 펌프 필터를 청소하십시오.
- 과도한 진동/소음: Ensure transport bolts have been removed. Check if the machine is level and all four feet are firmly on the floor. Distribute laundry evenly in the drum.
- Foam visible: The foam control system is active. Reduce detergent quantity for the next wash.
- Child lock active: Deactivate the child lock function as per the instructions in your full manual.
If the problem persists, refer to the comprehensive troubleshooting guide in your full user manual or contact Bosch customer service.
7. 사양
Detailed technical specifications for the Bosch WAN2405MPL washing machine:
| 특징 | 사양 |
|---|---|
| 모델 | WAN2405MPL |
| 용량 | 8kg |
| 에너지 효율 등급 | A (음계 A~G) |
| 에너지 소비량 (100회 작동 주기) | 46킬로와트 |
| 물 소비량(사이클당) | 47리터 |
| 맥스. 회전 속도 | 1200 분당 |
| Spin-drying Class | B |
| 소음 수준(스핀) | 71 dB (Class A emission) |
| 치수(높이 x 너비 x 깊이) | 845mm x 598mm x 590mm |
| 무게 | 67.7kg |
| 권tage / 주파수 | 220-240V/50Hz |
| 케이블 길이 | 1.6분 |
| 드럼 볼륨 | 65리터 |
| 제어 유형 | 로터리, 터치 |
| 디스플레이 유형 | 주도의 |
| 특별 기능 | AquaStop, Foam Control, Automatic Load Control, Child Lock, Delayed Start (up to 24h), Iron Assist |
8. 보증 및 지원
Your Bosch washing machine comes with a manufacturer's warranty. For detailed information regarding warranty terms and conditions, please refer to the warranty card included with your appliance or visit the official Bosch web귀하의 지역에 대한 사이트.
For technical support, spare parts, or service requests, please contact Bosch customer service. Have your appliance's model number (WAN2405MPL) and serial number ready when contacting support.
자세한 정보와 지원은 Bosch 공식 웹사이트에서 확인하실 수 있습니다. web대지: www.bosch-home.com
