소개
This manual provides detailed instructions for the assembly, operation, and maintenance of your BOMGE Boom Arm Mic Stand MS808. Designed for podcasts, streaming, gaming, home office, and recording environments, this stand offers stability and flexibility for various microphone setups. Please read this manual thoroughly before use to ensure proper installation and optimal performance.
Image: The BOMGE Boom Arm Mic Stand MS808, showcasing its design and color. A microphone is shown attached to the arm.
패키지 내용
조립을 진행하기 전에 패키지에 모든 구성품이 들어 있는지 확인하십시오.
- 암 스탠드
- 테이블 Clamp
- 3/8인치에서 1/4인치 나사 어댑터
- 3/8인치에서 5/8인치 나사 어댑터
Image: A visual representation of the items included in the BOMGE Boom Arm Mic Stand MS808 package: the arm stand, table clamp, and two screw adapters.
설치 지침
- 테이블 Cl을 첨부하세요amp: 테이블 클립을 단단히 고정하세요amp to the edge of your desk or desired surface. Ensure the clamp is tightened firmly to prevent movement during use. The clamp is designed to accommodate various desk thicknesses.
Image: The table clamp component of the boom arm stand, shown attached to a desk edge.
- 암 스탠드 삽입: Insert the base of the boom arm stand into the hole on the table clamp. The arm should rotate freely within the clamp.
- 마이크를 장착하세요:
- The stand features a standard 5/8" connector.
- If your microphone requires a different thread size, use the provided 3/8" to 1/4" or 3/8" to 5/8" screw adapters as needed.
- Screw your microphone or shock mount onto the threaded connector at the end of the boom arm. Ensure it is securely fastened.
Image: The boom arm stand with a microphone attached, demonstrating broad compatibility with various microphone devices.
- 케이블 관리 : The boom arm features integrated cable management channels. Gently pry open the covers on the back of the lower arm and the underside of the upper arm. Route your microphone cable through these channels for a clean and organized setup. Press the covers back into place once the cable is routed.
작동 지침
붐 암 조정
The BOMGE Boom Arm Mic Stand is designed for flexible positioning to optimize your microphone placement for various activities such as podcasting, gaming, or streaming.
- 360° 회전: The arm can rotate 360 degrees at its base, allowing you to swing the microphone into position or out of the way as needed.
- 다중 각도 조정: The arm features multiple joints that allow for flexible adjustment of height and reach. The joints are tension-adjustable to hold your microphone securely in any desired position.
- 수직 도달: The arm provides a vertical reach of up to 800 mm (31.5 inches), suitable for extending over most monitors.
- 장력 조정: For heavier microphones (up to 3.5 lbs / 1.6 kg), the internal spring system can be adjusted to increase tension, ensuring the arm remains stable and prevents accidental drops.
Image: The boom arm stand demonstrating flexible adjustment from multiple angles, highlighting its range of motion.
이미지: 상세 view of the BOMGE Boom Arm Mic Stand MS808's adjustable joints, showing 210° and 180° rotation capabilities for precise microphone positioning.
유지
To ensure the longevity and optimal performance of your BOMGE Boom Arm Mic Stand, follow these maintenance guidelines:
- 청소: Wipe the stand with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents, which can damage the finish.
- 합동 검사: Periodically check the tension of the joints. If the arm feels loose or struggles to hold your microphone's weight, adjust the tension screws as necessary.
- Clamp 보안: 책상이 깨끗한지 확인하세요amp remains tightly secured to your surface. Re-tighten if any looseness is detected to maintain stability.
- 케이블 채널: Keep the cable management channels clear of obstructions.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Arm does not hold position or sags. | Insufficient joint tension; microphone too heavy. | Adjust the tension screws on the arm joints. Ensure microphone weight does not exceed 3.5 lbs (1.6 kg). |
| 스탠드가 흔들리거나 불안정합니다. | 데스크 CLamp not securely fastened; uneven surface. | 책상 고정 장치를 다시 조여주세요amp firmly. Ensure the desk surface is stable and flat. |
| Squeaking noise during adjustment. | Friction in joints. | Apply a small amount of silicone-based lubricant to the moving parts of the joints. |
| Microphone cannot be screwed onto the arm. | 잘못된 실 크기. | Use the appropriate 3/8" to 1/4" or 3/8" to 5/8" screw adapter. |
명세서
- 모델 번호: MS808
- 재료: 금속
- 색상: 분홍색
- 최대 부하 용량 : 3.5파운드(1.6kg)
- 수직 도달: 800의 mm (31.5 인치)
- 제품 크기(접었을 때): 약 17.72 x 3.94 x 2.36cm(45 x 10 x 6인치)
- 커넥터 유형: 5/8-inch thread (with 3/8" to 1/4" and 3/8" to 5/8" adapters included)
- 특징: Internal springs, integrated cable management channels, 360° swivel base, multi-angle adjustable joints.
Image: A diagram illustrating the BOMGE Boom Arm Mic Stand MS808's maximum load capacity of 3.5 lbs and its dimensions, comparing it to other stands.
Image: A close-up illustrating the 1500g (1.5kg) carrying capacity of the BOMGE Boom Arm Mic Stand MS808, indicating its ability to support significant weight.
보증 및 지원
For warranty information or technical support regarding your BOMGE Boom Arm Mic Stand MS808, please refer to the official BOMGE web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 영수증을 보관하세요.
BOMGE Official Web대지: Visit BOMGE Store on Amazon
