1. 서론
The XPG Core Reactor II Power Supply is a high-performance component designed to provide stable and efficient power to your computer system. With 750W of power and 80 Plus Gold certification, it ensures high energy efficiency. Its Full Modular design simplifies installation and cable management. The Active PFC (Power Factor Correction) feature further enhances overall system performance by delivering consistent and reliable power, crucial for demanding PC operations.
2. 안전 정보
Please read and understand all safety instructions before installing or operating the power supply. Failure to do so may result in personal injury or damage to the product or other components.
- 전기 안전: Always disconnect the power cord from the wall outlet before installing, removing, or cleaning the power supply. Ensure your hands are dry when handling electrical components.
- 적절한 접지: Ensure your computer system and the power outlet are properly grounded to prevent electrical shock.
- 통풍: Do not block the ventilation openings of the power supply. Ensure adequate airflow around the unit to prevent overheating.
- 환경: 건조하고 통풍이 잘 되는 환경에서 전원 공급 장치를 작동하세요. 습기, 먼지, 극한 온도에 노출되지 않도록 하세요.
- 손질: Handle the power supply with care. Avoid dropping or subjecting it to strong impacts.
- 공인 서비스: Do not attempt to open or repair the power supply yourself. Refer all servicing to qualified service personnel. Opening the unit will void the warranty.
3. 패키지 내용
Verify that all items listed below are present in your package. If any items are missing or damaged, please contact your retailer or XPG support.
- XPG Core Reactor II Power Supply Unit
- Modular Cable Set (including ATX 24-pin, EPS/CPU 4+4-pin, PCIe 6+2-pin, SATA, and Peripheral cables)
- AC 전원 코드
- 장착 나사
- 사용 설명서 (본 문서)
Image: The XPG Core Reactor II Power Supply unit, showcasing its black finish, fan grille, and modular cable ports. The image also implies the presence of various modular cables for system connection.
4. 설정 및 설치
Follow these steps to properly install your XPG Core Reactor II Power Supply into your computer system.
- 시스템 준비: 컴퓨터의 전원이 완전히 꺼져 있고 벽면 콘센트에서 플러그가 뽑혀 있는지 확인하십시오. 컴퓨터 케이스를 여십시오.
- 기존 전원 공급 장치를 제거하십시오(해당되는 경우): 기존 전원 공급 장치의 모든 케이블을 분리하고 고정 나사를 제거하십시오. 전원 공급 장치를 케이스에서 조심스럽게 빼내십시오.
- Mount the New Power Supply: Position the XPG Core Reactor II Power Supply in the designated PSU bay of your computer case. Ensure the fan is oriented correctly (typically facing downwards or upwards depending on case design and ventilation). Secure it with the provided mounting screws.
- 모듈형 케이블 연결: Due to its full modular design, you only need to connect the cables required for your components.
- 마더보드 전원: Connect the 24-pin ATX cable to the corresponding port on the power supply and the motherboard.
- CPU 파워: Connect the 4+4-pin EPS/CPU cable to the power supply and the CPU power connector(s) on your motherboard.
- 그래픽 카드 전원: Connect the 6+2-pin PCIe cables to the power supply and your graphics card(s). Use separate cables for each connector on high-power GPUs if possible.
- SATA 장치: SATA 전원 케이블을 SSD, HDD, 광학 드라이브에 연결합니다.
- 주변 장치: Connect peripheral (Molex) cables for case fans or other accessories as needed.
- 케이블 관리 : 케이스 내부의 공기 흐름과 미관을 개선하기 위해 케이블을 깔끔하게 정리하세요.
- 케이스를 닫고 전원을 연결하세요: 모든 연결이 제대로 되었으면 컴퓨터 케이스를 닫으십시오. AC 전원 코드를 전원 공급 장치에 연결한 다음 벽면 콘센트에 꽂으십시오.
5. 사용 설명서
Operating the XPG Core Reactor II Power Supply is straightforward once installed.
- 전원 켜기: Ensure the power switch on the back of the power supply (next to the AC inlet) is in the 'I' (On) position. Then, power on your computer using the case's power button.
- 능률: The 80 Plus Gold certification indicates high energy efficiency, meaning less wasted heat and lower electricity consumption compared to less efficient power supplies.
- Active PFC: The Active Power Factor Correction feature automatically adjusts the input current waveform to improve the power factor, leading to more stable and cleaner power delivery to your components.
- 전원 끄기 : To shut down your system, use the operating system's shutdown function. For complete power disconnection, switch the power supply's switch to the 'O' (Off) position and unplug the AC power cord.
6. 유지관리
정기적인 유지관리는 전원 공급 장치의 수명과 최적의 성능을 보장하는 데 도움이 됩니다.
- 먼지 제거: Periodically (e.g., every 3-6 months), power off and unplug your computer. Use compressed air to gently blow dust out of the power supply's fan grille and ventilation openings. Hold the fan blades to prevent them from spinning rapidly during cleaning, which can damage the bearings.
- 케이블 검사: Occasionally check all connected modular cables to ensure they are securely seated and free from damage.
- 환경 점검: Ensure the operating environment remains clean, dry, and within recommended temperature ranges.
7. 문제 해결
If you encounter issues with your XPG Core Reactor II Power Supply, refer to the following common troubleshooting steps:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 시스템 전원이 켜지지 않습니다. | Power cord not connected, PSU switch off, loose internal cables, faulty component. |
|
| 시스템이 켜지지만 즉시 종료됩니다. | Overload, overheating, short circuit, faulty component. |
|
| 파워서플라이에서 평소와 다른 소음이 납니다. | Fan obstruction, faulty fan bearing. |
|
If the problem persists after trying these steps, please contact XPG customer support for further assistance.
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 엑스피지(XPG) |
| 모델명 | 75261186 |
| 출력 와트tage | 750 와트 |
| 효율성 인증 | 80 플러스 골드 |
| 폼 팩터 | 에이티엑스 |
| 모듈성 | 전체 모듈식 |
| PFC 유형 | 활성 PFC |
| 냉각 방식 | 공기 |
| 커넥터 유형 | ATX (24 Pin, EPS, PCIe, SATA, Peripheral) |
| 품목 무게 | 7.35파운드(약 3.33kg) |
| 패키지 크기 | 13.39 x 8.43 x 6.38인치(약 34 x 21.4 x 16.2cm) |
| 색상 | 검은색 |
| 최대 입력 볼륨tage | 120볼트(AC) |
9. 보증 및 지원
For warranty information, technical support, or service inquiries regarding your XPG Core Reactor II Power Supply, please visit the official XPG web사이트를 방문하거나 고객 지원팀에 직접 문의하세요.
You can also visit the official XPG Store on Amazon for product information and support resources:
