1. 서론
Thank you for choosing Herdio 4 Inch Bluetooth Marine Speakers. This manual provides essential information for the proper installation, operation, and maintenance of your new audio system. Designed for outdoor environments, these waterproof speakers offer robust sound for marine, ATV, UTV, golf cart, and other powersports applications. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.
Image: Herdio 4 Inch Bluetooth Marine Speakers in white, showcasin제품 디자인.
2. 상자 안에 무엇이 들어있나요?
Upon opening your Herdio 4 Inch Bluetooth Marine Speakers package, please verify that all the following components are included:
- 4 x Marine Speakers with Mounting Brackets
- 1 개 Amplifier (Model AMP-BTX01)
- 1 x 전원 케이블
- 1 x Set of Bolts for installation
- 사용자 설명서 1부 (용) Amp리피어)
Video: Unboxing the Herdio 4 Inch 240W Marine Bluetooth Speakers for Golf Cart. This video demonstrates the contents of the package, including the four speakers, amplifier, power cable, and mounting hardware.
3. 제품 사양
| 특징 | 사양 |
|---|---|
| 모델명 | SZJW-4-61BT |
| 스피커 유형 | 집 밖의 |
| 장착 유형 | 표면 장착 |
| 재료 | 아크릴로니트릴 부타디엔 스티렌(ABS) |
| 색상 | 하얀색 |
| 제품 치수(각 스피커) | 4.3"D x 4.3"W x 4.3"H (11cm x 11cm x 11cm) |
| 품목 무게(전체) | 6.38파운드(2.9킬로그램) |
| 스피커 크기 | 4 인치 |
| 스피커 최대 출력 전력 | 240와트 (스피커당 60와트) |
| 임피던스 | 4옴 |
| 주파수 응답 | 80Hz-20kHz |
| 능률 | 91데시벨 |
| 연결 기술 | 블루투스 5.0 |
| 무선 통신 기술 | 블루투스 |
| 블루투스 범위 | 20미터(65.62피트) |
| 방수 레벨 | 방수 (IP66) |
| 전원 | 유선 전기(12V DC) |
| 포함된 구성 요소 | 4 marine speakers with mounting brackets, 1 amplifier, 1 power cable, a set of bolts |
| 추천 용도 | Marine, Boat, UTV, ATV, Truck, Golf Cart, RV, Off-Road Vehicles, Outdoor activities, Water sports |
Image: Detailed product dimensions of a single Herdio 4 Inch Marine Speaker, showing measurements in inches and centimeters.
Image: Diagram illustrating the 60W maximum power output per speaker for deep stereo sound, highlighting the internal components.
4. 설정 및 설치
Follow these steps for proper installation of your Herdio Marine Speakers and amp정수기:
4.1 Speaker Cable Connection to Amp리퍼
- Identify the speaker cables. The white wire is positive (+), and the black wire is negative (-).
- Locate the speaker terminals on the amp리퍼(AMP-BTX01). There are terminals for Left+ (L+), Left- (L-), Right+ (R+), and Right- (R-).
- Using a small screwdriver, loosen the screws on the amp리퍼 터미널.
- Insert the corresponding speaker wires into the terminals. Ensure correct polarity: white to positive, black to negative.
- 나사를 조여 전선을 단단히 고정합니다.
Image: Wiring diagram illustrating the connection of four speakers to the Herdio amplifier and a 12V power supply, with Bluetooth pairing shown via a smartphone.
Video: Detailed demonstration of wiring the speaker cables to the amplifier terminals and connecting the power supply. The video also shows the Bluetooth pairing process and basic amp리파이어 컨트롤.
4.2 전원 공급 장치 연결
- Connect the provided 12V DC power cable to the amplifier's power input port.
- Connect the red wire of the power cable to the positive terminal of your 12V battery (e.g., car battery, marine battery).
- Connect the black wire of the power cable to the negative terminal of your 12V battery.
- Ensure all connections are secure to prevent power interruptions or damage.
4.3 스피커 장착
The speakers come with adjustable mounting brackets for flexible installation.
- To attach the bracket, turn the knob on the side of the speaker counter-clockwise to remove it.
- Position the bracket on your desired mounting surface (e.g., support bar, frame, roll-cage) and secure it using the provided screws.
- Place the speaker back onto the bracket and tighten the knob clockwise until the speaker is firmly held.
- Loosen the knobs slightly to adjust the speaker's angle (up to 180 degrees rotation) for optimal sound direction, then re-tighten.
Image: Illustration of the easy and flexible installation process, highlighting the 180-degree rotatable mounting bracket for the speakers.
5. 사용 설명서
5.1 Amp리퍼 컨트롤
그만큼 amplifier features several buttons for controlling playback and settings:
- 전원 버튼 (⏻): Long press for 3 seconds to power on/off. Short press to play/pause.
- 모드 버튼(MODE): Short press to switch between Bluetooth (BT), USB, Auxiliary (AUX), and Microphone (MIC) modes. Long press for 3 seconds to restore factory settings.
- Volume Down / TWS Button (VOL- TWS): Short press to decrease volume. Long press for 3 seconds to turn on/off TWS (True Wireless Stereo) mode.
- Volume Up / Mono Button (VOL+ MONO): Short press to increase volume. Long press for 3 seconds to turn on/off Mono mode.
- 이전 트랙 버튼 (⏮): Short press for previous song. Long press for 3 seconds to fast rewind.
- 다음 트랙 버튼 (⏰): Short press for next song. Long press for 3 seconds to fast forward.
이미지: 상세도 amplifier's control panel, labeling each button and its corresponding function for power, mode, volume, TWS, mono, and track navigation.
5.2 블루투스 페어링
- 확인하십시오 amplifier is powered on. The blue Bluetooth indicator light will blink, indicating it is in pairing mode.
- 모바일 기기(스마트폰, 태블릿 등)에서 블루투스 설정으로 이동하세요.
- 검색 available devices and select "Herdio" or the specific model name (e.g., "AMP-BTX01") to connect.
- Once connected, the blue Bluetooth indicator light on the amplifier will become constant.
- You can now play audio from your device through the Herdio speakers.
Image: A golf cart with Herdio speakers installed, illustrating Bluetooth connectivity from a smartphone to the speakers, indicating wireless audio streaming.
6. 유지관리
To ensure the longevity and optimal performance of your Herdio Marine Speakers, follow these maintenance guidelines:
- 청소: 부드러운 d를 사용하세요amp cloth to wipe down the speakers and amplifier. Avoid harsh chemicals, solvents, or abrasive cleaners, as these can damage the surfaces.
- 물 노출: While the speakers are waterproof (IP66 rated), prolonged submersion is not recommended. Ensure all connections are secure and protected from direct water spray when possible.
- 저장: If storing the speakers for an extended period, especially in harsh conditions, disconnect them from the power source and store them in a dry, protected area.
- 연결 확인: Periodically inspect all wiring connections to ensure they remain tight and free from corrosion. Loose connections can lead to poor sound quality or system malfunction.
- 환경적 요인: Avoid exposing the speakers to extreme temperatures or direct, prolonged sunlight when not in use, as this can degrade materials over time.
Image: A Herdio speaker being splashed with water, visually confirming its waterproof capabilities for marine and outdoor use.
7. 문제 해결
If you encounter issues with your Herdio Marine Speakers, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원이 없습니다 | Loose power connection; Battery drained; Amp리퍼 꺼. | Check power cable connections to amplifier and battery. Ensure battery has charge. Long press the power button on the amp그것을 켜려면 lifier. |
| 소리가 나지 않습니다 | Incorrect mode selected; Volume too low; Loose speaker wires; Device not paired. | Press MODE button to select correct input. Increase volume on amplifier and connected device. Check speaker wire connections. Re-pair Bluetooth device. |
| 블루투스 연결 해제 | 기기가 통신 범위를 벗어났습니다. 간섭이 발생했습니다. 기기의 배터리가 부족합니다. | 기기를 더 가까이 옮기세요 amplifier (within 20 meters). Avoid obstacles. Charge your device. Try re-pairing. |
| Poor Sound Quality (Distortion, Static) | Volume too high; Loose speaker connections; Damaged speaker wire; Interference. | Reduce volume. Check all speaker wire connections for tightness and proper polarity. Inspect wires for damage. Move away from other electronic devices. |
| Speakers Not Rotating | Knobs are too tight. | Loosen the side knobs slightly to allow for rotation, then re-tighten once the desired angle is achieved. |
8. 보증 및 지원
Herdio products are designed for reliability and performance. This product comes with a 한정 보증. For specific warranty details, including coverage period and terms, please refer to the warranty information provided with your purchase or contact Herdio customer support.
If you require further assistance, have questions not covered in this manual, or need to claim warranty service, please contact Herdio customer support through the retailer where you purchased the product or visit the official Herdio web연락처 정보 사이트.
Herdio Direct Store: Visit Herdio Store on Amazon
