InnoGear 500ml 에센셜 오일 디퓨저 사용 설명서

소개

Thank you for choosing the InnoGear 500ml Essential Oil Diffuser. This ultrasonic aromatherapy diffuser is designed to disperse a fine mist of water and essential oils into the air, providing humidification and a pleasant aroma. It features a large capacity, remote control operation, multiple mist modes, timer settings, and an ambient LED light. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Image: The InnoGear 500ml Essential Oil Diffuser in yellow with its remote control, showcasin세련된 디자인이에요.

패키지 내용

개봉 시 패키지 내용물을 확인하여 모든 품목이 들어 있는지 확인하세요.

• 1 x 500ml Diffuser
• 1 x 원격 제어
• 1 x 측정 컵
• 1 x AC / DC 어댑터
• 1 x 사용자 매뉴얼(이 문서)

Image: A visual representation of the diffuser, remote control, measuring cup, and power adapter as included in the product packaging.

명세서

안전 지침

안전한 작동을 보장하고 손상을 방지하려면 다음 안전 예방 조치를 준수하세요.

• Do not exceed the MAX water line when filling the tank.
• Always use clean tap water or distilled water.
• Add essential oils carefully to avoid spilling on the exterior of the diffuser.
• Do not place the diffuser on uneven or unstable surfaces.
• 어린이와 애완동물의 손이 닿지 않는 곳에 보관하세요.
• 디퓨저를 청소하거나 물을 다시 채우기 전에 전원 콘센트에서 플러그를 뽑으십시오.
• Do not touch the ultrasonic vibrating plate directly with your hands.
• 디퓨저에서 이상한 냄새나 소리가 나면 즉시 플러그를 뽑으세요.
• 미스트 배출구를 막지 마십시오.
• 본 기기는 신체적, 감각적 또는 정신적 능력이 저하된 사람(어린이 포함)이나 경험 및 지식이 부족한 사람이 사용하도록 의도된 것이 아니며, 안전을 책임질 사람으로부터 기기 사용에 관한 감독이나 지시를 받은 경우에만 사용할 수 있습니다.

설정

이노기어 에센셜 오일 디퓨저를 설치하려면 다음 단계를 따르세요.

1. 디퓨저를 평평하고 안정된 표면에 놓으십시오.
2. Remove the top cover by lifting it upwards.
3. Connect the AC adapter to the DC jack at the bottom of the diffuser.
4. Fill the water tank with clean water using the provided measuring cup. Do not exceed the 'MAX' fill line (500ml).
5. 물탱크에 원하는 에센셜 오일 3~5방울을 직접 떨어뜨려 주세요. 개인적인 취향과 방 크기에 따라 양을 조절하시면 됩니다.
6. 윗 덮개를 다시 장착하고 단단히 고정되었는지 확인하세요.
7. AC 어댑터를 표준 벽면 콘센트에 꽂습니다.

Image: A hand pouring water into the diffuser's reservoir, illustrating the one-step refilling process and the 'MAX' fill line.

작동 지침

전원 켜기/끄기

• Press the 'MIST' button on the diffuser or the 'ON/OFF' button on the remote control to turn on the mist.
• Press and hold the 'MIST' button for 2 seconds or press the 'ON/OFF' button on the remote again to turn off the mist.

Mist Modes and Timer Settings

The diffuser offers various mist modes and timer options:

• 지속적인 안개: Press the 'MIST' button repeatedly to cycle through timer settings (1H/2H/3H). The diffuser will run continuously until the water runs out or the timer expires.
• 간헐적인 안개: Press the 'INTERMITTENT' button on the remote. The diffuser will mist for 10 seconds and pause for 10 seconds.
• Strong/Weak Mist: Press the 'HIGH/LOW' button on the diffuser or the '+/-' button on the remote to switch between strong and weak mist output. Strong mist lasts 9-12 hours, weak mist lasts 16-18 hours.

Image: A diagram illustrating the optional mist modes (strong and weak) and timer settings (1, 2, 3 hours) available on the diffuser.

Image: The diffuser operating in a bedroom setting, highlighting its ability to run for up to 18 hours.

조명 설정

The diffuser features an ambient LED light with multiple options:

• Press the 'LIGHT' button on the diffuser or the 'LIGHT' button on the remote to turn on the light.
• Each press cycles through 8 colors, each with two intensity settings (50% brightness or full brightness), offering 16 different light combinations.
• You can set the light to cycle through colors, fix it on a single color, or turn it off independently of the mist function.

Image: The diffuser emitting a warm yellow light, with an infographic detailing the 8 LED colors and adjustable brightness features.

원격 제어 작동

The included remote control allows for convenient operation from a distance of up to 16.5 feet. Ensure the plastic film is removed from the battery compartment before first use.

• 켜기/끄기: Turns the mist on or off.
• 간헐적 인: Activates intermittent mist mode (10 seconds on, 10 seconds off).
• 타이밍: Cycles through timer settings (1H/2H/3H).
• 마디 없는: Sets the diffuser to continuous mist mode.
• +/- (BIG/SMALL): Adjusts mist output between strong and weak.
• 빛: Controls the LED light settings (on, cycle colors, fixed color, off).

Image: A person comfortably operating the diffuser with the remote control from a sofa, demonstrating ease of use.

유지

정기적인 청소는 디퓨저의 성능을 유지하고 수명을 연장하는 데 도움이 됩니다.

디퓨저 청소

1. 디퓨저의 플러그를 전원 콘센트에서 뽑고 상단 덮개를 제거하세요.
2. Pour out any remaining water from the 'DRAIN SIDE' of the tank to avoid water entering the air outlet.
3. Wipe the inside of the water tank with a soft cloth.
4. For stubborn residue, add a small amount of white vinegar (about 1 tablespoon) to the tank and let it sit for 10-15 minutes.
5. Gently clean the ultrasonic vibrating plate (the small ceramic disc at the bottom of the tank) with a cotton swab dipped in white vinegar. Do not scrub or use abrasive materials.
6. Rinse the tank with clean water, ensuring no vinegar residue remains.
7. 부드럽고 마른 천으로 디퓨저 외부를 닦으세요.
8. 모든 부품을 완전히 자연 건조시킨 후 다시 조립하거나 보관하세요.

메모: Clean the diffuser after every 5-6 uses or every 3-5 days to prevent mineral buildup and ensure optimal mist output.

저장

When not in use for an extended period, clean the diffuser thoroughly, ensure it is completely dry, and store it in a cool, dry place away from direct sunlight.

문제 해결

디퓨저에 문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.

보증 및 지원

InnoGear provides a standard warranty for this product. For specific warranty terms, registration, or technical support, please refer to the warranty card included in your package or visit the official InnoGear website. If you have any questions or require assistance, please do not hesitate to contact our customer service team.

연락처 정보: Please refer to the contact details provided on the product packaging or the InnoGear official web최신 지원 정보는 사이트에서 확인하세요.