1. 서론
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Robbe 1/16 Linde H50 RC Forklift model. It also covers the integration of various optional accessories. Please read this manual thoroughly before beginning assembly or operation to ensure safe and correct use of the model.
2. 안전 정보
Your safety and the proper functioning of the model depend on careful adherence to these guidelines. Always operate the model responsibly.
- 매뉴얼을 읽어보세요: Always read the entire instruction manual before assembly or operation.
- 성인 감독: This product is a sophisticated model and requires adult supervision for assembly and operation, especially for younger users.
- 작은 부품: The kit contains small parts that can be a choking hazard. Keep them out of reach of small children.
- 배터리 안전: Use only recommended batteries and chargers. Follow all battery charging and handling instructions to prevent fire, injury, or damage. Do not short-circuit batteries.
- 운영 환경: Operate the RC forklift in a safe, open area, away from people, pets, and obstacles. Avoid operating near water or in wet conditions.
- 유지: Regularly inspect the model for any damage or loose parts before and after each use.
3. 패키지 내용
Carefully unpack all components and verify them against the list below. If any parts are missing or damaged, contact customer support immediately.
그림 3.1: Complete Robbe 1/16 Linde H50 RC Forklift kit with various optional accessories and parts laid out. This image displays the comprehensive kit, including the main Robbe Linde H50 forklift model box, the Robbe Lastenanhänger (trailer) box, the Zubehörset 'Transport' (accessory set), and numerous individual optional parts such as a dummy figure, traffic cones, gas barrels, and electronic components.
그림 3.2: Opened box of the Robbe 1/16 Linde H50 RC Forklift model kit, showing internal components. The main forklift kit box is shown open, revealing the molded plastic parts for the forklift chassis and body, along with smaller components and a motor/gearbox assembly, all neatly organized within the packaging.
그림 3.3: Opened box of the Robbe Lastenanhänger (trailer) model kit, showing internal components. This image shows the open box for the Robbe Lastenanhänger (trailer), displaying the wooden platform, plastic wheel parts, and other components required for assembling the trailer, along with its instruction sheet.
그림 3.4: Opened box of the Robbe Zubehörset 'Transport' accessory kit, showing miniature pallets, barrels, and crates. The Zubehörset 'Transport' box is open, revealing miniature wooden pallets, metal barrels, wooden crates, and a blue lattice box, designed to be used as cargo with the forklift model.
그림 3.5: Close-up of various small accessory packs for the Robbe RC forklift, including a dummy figure, traffic cones, and gas barrels. This image features several individually packaged accessory sets: a 'Puppe' (dummy) figure, miniature traffic cones, and 'Treibstofffass' (gas barrel) sets, along with other small parts like 'Bierkisten' (beer crates) and 'P-ONE' parts.
그림 3.6: Electronic components for the RC forklift, including Futaba servos and a Sanyo Cadnica battery pack. Key electronic components are displayed, including two Futaba S3003 servos, a Sanwa ES-01 mini FET amplifier, and a Sanyo Cadnica 6V 600mAh Ni-Cd rechargeable battery pack, essential for the forklift's operation.
그림 3.7: Close-up of the Sanyo Cadnica 6V 600mAh Ni-Cd battery pack and Sanwa ES-01 mini FET amplifier. A detailed view of the Sanyo Cadnica 6V 600mAh Ni-Cd battery pack and the Sanwa ES-01 mini FET amplifier, showing their labels and specifications.
그림 3.8: Bagged plastic components for the Robbe RC forklift model. Two clear plastic bags containing various molded plastic parts for the forklift model, including gears, small structural pieces, and other assembly components.
그림 3.9: Main body shell components and instruction manuals for the Robbe 1/16 Linde H50 RC Forklift. This image shows the main orange plastic body shell components of the forklift, along with the primary instruction manual for the Linde H50 model and additional documentation for accessories and parts.
Main Kit (Linde H50 Forklift No. 3349)
- Forklift chassis and body parts (molded plastic)
- Motor and gearbox assembly
- 바퀴와 타이어
- Forklift mast components
- Small hardware (screws, nuts, washers)
- 데칼 시트
- Instruction manual for Linde H50
Optional Accessories (as shown)
- Robbe Lastenanhänger (Trailer) No. 33497000: Wooden platform, plastic parts, wheels, instruction manual.
- Zubehörset "Transport" No. 33492000: 2 Euro pallets, 5 beer barrels, 2 wooden crates, 1 lattice box, 2 long forks.
- Puppe (Dummy) Figure No. 1634
- Traffic Cones (P-ONE)
- Treibstofffass (Gas Barrel) sets
- Electronic Components: Futaba S3003 Servos, Sanwa ES-01 Mini FET Amplifier, Sanyo Cadnica 6V 600mAh Ni-Cd Battery Pack.
- Various other small parts and accessories.
4. 조립 설명서
Assembly of the Robbe Linde H50 RC Forklift and its accessories requires patience and attention to detail. Refer to the specific instruction manuals included with each kit for detailed, step-by-step guidance.
4.1 Main Forklift Assembly
- Chassis and Drive Train: Begin by assembling the main chassis components. Install the motor and gearbox according to the diagrams in the Linde H50 manual. Ensure all gears mesh smoothly.
- 마스트 조립체: Assemble the forklift mast, ensuring all lifting mechanisms operate freely. Pay close attention to the cable routing for the lifting function.
- Body Panels: Attach the main body panels to the chassis.
- 바퀴: Mount the wheels and tires securely.
4.2 Electronics Installation
- 서보 : Install the Futaba S3003 servos in their designated positions for steering and mast control. Ensure they have full range of motion without binding.
- Amp변환기/수신기: Connect the Sanwa ES-01 mini FET amplifier to your RC receiver (not included) and the motor. Follow the wiring diagrams provided with your RC system.
- 배터리: Securely place the Sanyo Cadnica 6V 600mAh Ni-Cd battery pack in its compartment. Connect it to the amplifier/receiver system.
- 테스트: Before closing up the model, perform a basic function test of all electronic components using your RC transmitter.
4.3 Trailer and Accessory Assembly
- 트레일러: Assemble the Lastenanhänger (trailer) following its dedicated manual. This typically involves assembling the wooden platform, chassis, and wheels.
- Transport Accessories: The Zubehörset 'Transport' items (pallets, barrels, crates) are generally pre-assembled or require minimal assembly.
- 기타 액세서리: Assemble any other optional accessories like the dummy figure or traffic cones as per their individual instructions.
5. 사용 설명서
Once assembled, your Robbe Linde H50 RC Forklift is ready for operation. Always ensure a safe operating environment.
5.1 작업 전 체크리스트
- Ensure all screws are tightened and parts are secure.
- Check battery charge level for both the forklift and your RC transmitter.
- Verify that all control surfaces (steering, lift, tilt) respond correctly to transmitter inputs.
- Clear the operating area of any obstacles or hazards.
5.2 기본 컨트롤
The operation of the forklift will depend on your specific RC transmitter. Typically, controls include:
- Throttle/Drive: 전진 및 후진 이동을 제어합니다.
- 조종: 좌우 방향을 조절합니다.
- 올리기/내리기: Controls the vertical movement of the forks.
- 경사: Controls the forward and backward tilt of the mast (if applicable to your model's configuration).
5.3 Handling Loads
Practice picking up and setting down loads with the forklift. Start with light, stable objects. Ensure the load is balanced on the forks before lifting and moving.
6. 관리 및 유지 보수
Regular maintenance will extend the life and performance of your RC forklift.
- 청소: After each use, gently clean the model with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or solvents.
- 매끄럽게 하기: Periodically apply a small amount of appropriate lubricant to moving parts such as gears, axles, and the mast lifting mechanism.
- 배터리 관리 : Always disconnect the battery after use. Store batteries in a cool, dry place. Follow manufacturer guidelines for charging and discharging Ni-Cd batteries to maintain their lifespan.
- 점검: Regularly inspect all components for wear, damage, or loose connections. Tighten any loose screws. Replace damaged parts promptly.
- 저장: Store the model in a clean, dry environment, away from direct sunlight and extreme temperatures.
7. 문제 해결
If you encounter issues with your RC forklift, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 모델이 제어에 반응하지 않습니다. | Low battery in model or transmitter; loose wiring; receiver/transmitter not bound. | Charge batteries; check all wiring connections; re-bind receiver and transmitter according to your RC system's manual. |
| Forklift moves slowly or inconsistently. | Low battery; motor/gearbox obstruction; excessive friction. | Charge battery; check for debris in gears; lubricate moving parts. |
| Forks do not lift or lower smoothly. | Obstruction in mast; cable binding; servo issue. | Inspect mast for debris; ensure cables are not tangled; check servo connection and function. |
| 핸들 조작이 반응이 없거나 불안정합니다. | Servo arm loose; steering linkage binding; servo malfunction. | Check servo arm attachment; ensure steering linkage moves freely; replace servo if necessary. |
8. 기술 사양
- 모델: Robbe Linde H50 RC Forklift
- 모델 번호: 번호 3349
- 규모: 1/16
- 전원: 6V Ni-Cd Battery Pack (Sanyo Cadnica 6V 600mAh recommended)
- 제어 시스템: Requires 2-channel (minimum) RC transmitter and receiver (not included)
- 서보 : Standard size servos (e.g., Futaba S3003)
- Amp정수기: Mini FET Amplifier (e.g., Sanwa ES-01)
- 재료: High-quality plastic, metal, and wood components.
9. 보증 및 지원
9.1 보증 정보
This product is a model kit and its warranty coverage may vary depending on the retailer and specific components. Please refer to your purchase receipt and the terms and conditions provided by the seller for detailed warranty information. Generally, model kits are covered against manufacturing defects at the time of purchase.
9.2 고객 지원
For technical assistance, missing parts, or warranty claims, please contact the retailer or the manufacturer directly. Have your model number (No. 3349) and proof of purchase ready when contacting support.
