Takstar V4 무선 비디오 마이크 시스템 사용 설명서

1. 서론

Thank you for choosing the Takstar V4 Wireless Video Microphone System. This system is designed to provide high-quality audio recording for various applications, including video production with DSLRs, smartphones, and cameras. It features 2.4GHz wireless transmission, real-time monitoring, noise reduction, and versatile compatibility. Please read this manual thoroughly before use to ensure proper operation and to maximize the performance of your device.

2. 패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인해 주세요. 품목이 누락되었거나 손상된 경우 판매점에 문의하세요.

• V4 Wireless Video Microphone (Transmitter and Receiver units)
• 충전 케이스
• Audio Cables (e.g., 3.5mm TRS for cameras, 3.5mm TRRS for smartphones, Lightning/USB-C adapters if included) - Note: Specific cable types may vary based on package version.
• USB 충전 케이블
• Windscreen/Dead Cat (for outdoor use)
• 사용 설명서 (본 문서)

3. 제품 오버view

The Takstar V4 system consists of a transmitter, a receiver, and a portable charging case. Familiarize yourself with the components and their functions.

그림 3.1: Takstar V4 Wireless Microphone System (Charging Case Open)

This image displays the Takstar V4 wireless microphone system with its charging case open. Inside the case, two transmitter units and one receiver unit are visible, indicating a dual-channel system. The units are compact and designed to fit securely within the case for charging and storage.

송신기 (TX) 3.1 개

그림 3.2: 송신기 유닛

The transmitter unit features an integrated microphone, a power indicator, and controls for various functions. It is designed to be clipped onto clothing for discreet audio capture.

• 통합 마이크: 전방향 픽업.
• Power/Status Indicator: Displays power status and connection.
• 전원 버튼: On/Off, pairing.
• 소음 감소 버튼: Cycles through noise reduction modes.
• TF 카드 슬롯 : For local audio storage.
• USB-C 포트: For charging and data transfer (if applicable).

3.2 수신기 (RX)

그림 3.3: 수신기 유닛

The receiver unit connects to your recording device (camera, smartphone). It features a connector for the device, volume controls, and a monitoring port.

• 장치 커넥터: USB-C, Lightning, or 3.5mm TRS/TRRS for connection to recording devices.
• 볼륨 조절 버튼: 출력 볼륨을 조절합니다.
• 3.5mm 모니터링 포트: For real-time audio monitoring with headphones.
• Power/Status Indicator: Displays power status and connection.

3.3 충전 케이스

그림 3.4: 충전 케이스

The portable charging case stores and recharges the transmitter and receiver units, providing extended battery life for on-the-go use.

• 충전 슬롯: Securely holds and charges TX and RX units.
• USB-C 충전 포트: 케이스 자체를 충전하려면.
• 배터리 표시기: 충전 케이스의 배터리 잔량을 표시합니다.

4. 설정 가이드

4.1 초기 충전

처음 사용하기 전에 송신기, 수신기 및 충전 케이스를 완전히 충전하십시오.

1. Place the transmitter(s) and receiver into the charging case.
2. 제공된 USB 충전 케이블을 사용하여 충전 케이스를 USB 전원에 연결하십시오.
3. The indicators on the units and case will show charging status. Once fully charged, the indicators will change (e.g., turn solid green or off).

그림 4.1: 시스템 충전

This image illustrates the portable charging case in use, with the microphone units placed inside. It highlights the convenience of charging the system while on the move, ideal for outdoor recording sessions or interviews.

4.2 녹음 장치 연결하기

The V4 system offers universal compatibility with cameras, iOS, and Android devices.

• 카메라(DSLR/미러리스)용: Connect the receiver's 3.5mm output to your camera's microphone input using the appropriate 3.5mm TRS cable.
• 스마트폰(iOS/안드로이드)용: Directly plug the receiver into your smartphone's Lightning port (for iOS) or USB-C port (for Android). Ensure your phone supports external microphones.

그림 4.2: Versatile Application and Compatibility

This image demonstrates the Takstar V4's broad compatibility, showing its use in various scenarios such as live streaming, vlogging, general filming, and interviews. It highlights the system's ability to connect to cameras, DSLRs, Android, and Apple smartphones.

4.3 페어링(자동)

The Takstar V4 system utilizes 2.4GHz wireless transmission, and units typically pair automatically upon powering on. If pairing does not occur:

1. 송신기와 수신기 모두 전원이 켜져 있는지 확인하십시오.
2. Refer to the specific pairing instructions in the quick start guide if manual pairing is required (usually involves pressing and holding a button on both units).
3. A solid indicator light on both units typically signifies a successful connection.

5. 사용 설명서

5.1 전원 켜기/끄기

• 전원 켜기: Press and hold the power button on the transmitter and receiver until the indicator light illuminates.
• 전원 끄기 : 표시등이 꺼질 때까지 전원 버튼을 다시 길게 누르세요.
• 자동 종료: The receiver and transmitter feature a smart shutdown function, automatically powering off after 10 minutes without connection to conserve battery.

5.2 볼륨 조절

Use the volume control buttons on the receiver to adjust the audio output level. There are typically 3 steps of adjustable volume.

5.3 실시간 모니터링

Connect headphones to the 3.5mm monitoring port on the receiver to listen to the audio being recorded in real-time. This allows you to verify audio quality and levels during recording.

5.4 Noise Reduction Modes

The transmitter features selectable noise reduction modes to adapt to various recording environments. Press the noise reduction button on the transmitter to cycle through the available modes (e.g., Off, Low, High). The indicator light may change to reflect the active mode.

5.5 TF Card Audio Storage

The transmitter supports local TF card audio storage, providing a backup in case of wireless signal interruption or for standalone recording.

1. Insert a TF card (not included) into the designated slot on the transmitter.
2. When recording, the audio will automatically be saved to the TF card.
3. To access recordings, connect the transmitter to a computer via USB-C or remove the TF card and use a card reader.

그림 5.1: TF 카드 저장

This image depicts a TF card being inserted into the side slot of the Takstar V4 transmitter unit. It visually explains the 'Auto Record To TF Storage' feature, where an inserted TF card allows for automatic local audio backup, indicated by an LED.

5.6 Standalone Voice Recorder

The microphone transmitter can function as a standalone voice recorder, allowing you to record audio directly to the inserted TF card without being connected to a receiver or recording device.

1. Ensure a TF card is inserted into the transmitter.
2. Power on the transmitter. Recording will typically begin automatically or can be initiated by a specific button press (refer to quick start guide for exact trigger).
3. Power off the transmitter to stop and save the recording.

6. 유지관리

• 청소: Use a soft, dry cloth to clean the units and charging case. Avoid using harsh chemicals or abrasive materials.
• 저장: 제품은 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오. 사용하지 않을 때는 항상 충전 케이스에 넣어 보관하십시오.
• 배터리 관리 : To prolong battery life, avoid fully discharging the units frequently. Recharge regularly, even if not in constant use.
• 물 노출: The units are not waterproof. Avoid exposure to water or high humidity.

7. 문제 해결

7.1 오디오 출력 없음

• Ensure both transmitter and receiver are powered on and successfully paired (indicator lights solid).
• Check the connection cable between the receiver and your recording device. Ensure it is fully inserted and the correct type (TRS for camera, TRRS for smartphone, or direct digital connection).
• 수신기와 녹음 장치의 볼륨 레벨을 확인하십시오.
• Test with headphones connected to the receiver's monitoring port to isolate the issue.
• Ensure the recording app on your smartphone is configured to use an external microphone.

7.2 Poor Audio Quality / Interference

• Ensure the transmitter is within the effective operating range (up to 120m line-of-sight). Obstacles can reduce range.
• Check for strong Wi-Fi or other 2.4GHz devices nearby that might cause interference.
• Activate noise reduction modes on the transmitter to mitigate environmental noise.
• Ensure the microphone is positioned correctly and not rubbing against clothing. Use the included windscreen for outdoor recording.

7.3개 기기가 충전되지 않음

• Ensure the USB charging cable is securely connected to both the charging case and a working power source.
• Verify that the units are correctly seated in their charging slots within the case.
• 충전 케이스의 배터리 잔량을 확인하세요.

8. 사양

참고 : 사양은 예고없이 변경 될 수 있습니다.

9. 보증 및 지원

For warranty information, technical support, or service inquiries, please contact your local Takstar distributor or visit the official Takstar web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

온라인 리소스:

• Official Takstar Web대지: www.takstar.com