매뉴얼+

Takstar MS-189

Takstar MS-189 탁상용 회의 마이크 사용 설명서

모델 : MS189

1. 서론

Thank you for choosing the Takstar MS-189 Table Conference Microphone. This manual provides detailed instructions for the proper setup, operation, and maintenance of your microphone. The MS-189 is a unidirectional condenser microphone designed for clear vocal pickup in conference settings, computer use, and other desktop applications. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

Takstar MS-189 Table Conference Microphone

이미지 1.1: The Takstar MS-189 Table Conference Microphone. This image displays the microphone with its gooseneck design and base unit, ready for desktop placement.

2. 제품 특징

  • Back Electret Condenser Transducer: Ensures high-quality audio capture.
  • High Sensitivity and Low Noise: Delivers clear and crisp sound reproduction.
  • Clear and Bright Vocal Pick-up: Optimized for speech and vocal applications.
  • LED 표시등이 있는 켜기/끄기 버튼: Located on both the base and gooseneck for easy control and status indication.
  • 유연한 전원 옵션: Can be powered by 9-52V phantom power or two 1.5V AA batteries.
  • 단방향 극성 패턴: 전방의 소리에 집중하여 배경 소음을 줄입니다.
  • Durable Gooseneck Design: Allows for flexible positioning and adjustment.

3. 패키지 내용

모든 품목이 들어 있는지 확인하기 위해 상자를 푼 후 패키지 내용물을 확인하세요.

  • Takstar MS-189 Table Conference Microphone (Gooseneck and Base Unit)
  • 사용 설명서 (본 문서)

Note: XLR cable and AA batteries are typically sold separately and may not be included.

4. 설정 지침

4.1 마이크 전원 공급

The MS-189 microphone offers two power options:

  1. Phantom Power (9-52V): If your audio mixer, interface, or computer sound card provides phantom power, connect the microphone using an XLR cable. The microphone will draw power directly from the connected device. Ensure phantom power is enabled on your device.
  2. AA Batteries (2 x 1.5V): If phantom power is not available, insert two 1.5V AA batteries into the battery compartment located on the underside of the microphone base. Ensure correct polarity (+/-) when inserting batteries.

Note: Do not use both phantom power and batteries simultaneously. The microphone will prioritize phantom power if both are connected.

4.2 장치에 연결하기

The MS-189 connects via an XLR connector.

  1. Locate the XLR output port on the microphone base.
  2. Connect one end of a standard XLR cable (not included) to the microphone's XLR output.
  3. Connect the other end of the XLR cable to an available XLR input on your audio mixer, audio interface, or computer sound card. Ensure the input is compatible with a condenser microphone.

4.3 마이크 배치

Place the microphone on a stable, flat surface. Position the gooseneck so the microphone head is approximately 15-30 cm (6-12 inches) from the speaker's mouth, pointing directly towards them for optimal sound capture.

5. 사용 설명서

5.1 전원 켜기/끄기

Press the ON/OFF button located on the microphone base. The LED indicator will illuminate when the microphone is active. Press the button again to turn off the microphone.

5.2 구즈넥 조정하기

Gently bend the flexible gooseneck to adjust the microphone's position and angle. Avoid excessive force to prevent damage.

5.3 최적 사용

  • For best results, speak directly into the microphone from a consistent distance.
  • Minimize background noise in the environment to enhance clarity.
  • Monitor audio levels on your connected device to prevent clipping or distortion.

6. 유지관리

  • 청소: 마이크 외부를 닦을 때는 부드럽고 마른 천을 사용하십시오. 액체 세척제나 용제를 사용하지 마십시오.
  • 저장: When not in use, store the microphone in a dry, dust-free environment. Avoid extreme temperatures and humidity.
  • 배터리 교체: If using battery power, replace AA batteries when the LED indicator dims or audio quality degrades. Remove batteries if the microphone will not be used for an extended period to prevent leakage.

7. 문제 해결

문제가능한 원인해결책
사운드 출력이 없습니다
  • 마이크 전원이 켜져 있지 않습니다.
  • Incorrect power source (e.g., phantom power not enabled, dead batteries).
  • XLR cable not connected properly or faulty.
  • Input device (mixer/interface) not configured correctly or volume too low.
  • ON/OFF 버튼을 누르세요.
  • Ensure phantom power is active or replace AA batteries.
  • XLR 케이블 연결 상태를 확인하고, 다른 케이블을 사용해 보세요.
  • Verify input settings and volume levels on your connected device.
Poor sound quality (low volume, distortion)
  • 마이크가 음원으로부터 너무 멀리 떨어져 있습니다.
  • Input gain on connected device too high or too low.
  • 과도한 배경 소음.
  • 케이블이나 연결 부분에 문제가 있습니다.
  • Position microphone closer to the speaker (15-30 cm).
  • Adjust input gain on your mixer/interface.
  • 녹음 환경의 주변 소음을 줄이세요.
  • Check/replace XLR cable.
LED 표시등이 켜지지 않음
  • 마이크 전원이 켜져 있지 않습니다.
  • No power supply (phantom power or batteries).
  • LED 오작동.
  • ON/OFF 버튼을 누르세요.
  • Verify phantom power is active or replace batteries.
  • 전원이 공급되는지 확인했는데도 LED가 켜지지 않으면 고객 지원팀에 문의하십시오.

8. 사양

모델MS-189
변환기 원리백 일렉 트릿 콘덴서
Directivity Characteristic (Polar Pattern)단방향
주파수 응답100Hz-16kHz
감광도-33dB±3dB(0kHz에서 1dB=1V/Pa)
출력 임피던스340Ω±30%(1kHz에서)
전력 요구 사항9-52V phantom power or 2 x 1.5V AA battery
연결 기술XLR
커넥터 유형XLR
호환 장치노트북, 개인용 컴퓨터
마이크 폼 팩터Gooseneck, Table Array
품목 치수(L x W x H)15 x 15 x 15cm
순중량500g
색상검은색

9. 보증 및 지원

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Takstar web해당 웹사이트를 참조하십시오. 도움이 필요하시면 지역 대리점이나 판매점에 문의하셔도 됩니다.

아마존에서 탁스타 스토어를 방문하세요 자세한 제품 정보와 지원 리소스를 확인하세요.