제품 끝view
The DAYTECH USR-6 Freezer and Refrigerator Door Alarm is designed to alert you when a door is left open for an extended period. It features adjustable delay times, two ringing modes (chime and alarm), and a wide volume range to suit various environments. This device helps prevent food spoilage and reduce energy consumption.
주요 특징은 다음과 같습니다.
- Adjustable delay times: 1, 2, 3, or 4 minutes.
- Two alert modes: Chime for gentle reminders and Alarm for loud alerts (up to 120 dB).
- Five adjustable volume levels (0dB to 120dB).
- Easy installation using adhesive tapes or screws.
- 배터리 부족 경고 표시기.
- Versatile use for refrigerators, freezers, cabinets, and other doors.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 제품 포장 상자
- Refrigerator Door Alarm (Main Unit and Magnetic Sensor)
- 사용자 설명서
- AAA Batteries (4 for a 2-pack set)
- Screws (for optional mounting)
영상: 제품 개봉 및 개요view
This video demonstrates the unboxing process and provides an overview of the product components included in the package.
설정 및 설치
The DAYTECH USR-6 alarm can be easily installed on most refrigerators, freezers, or other doors using either adhesive pads or screws.
설치 단계:
- 표면 준비: Ensure the installation surface on the refrigerator or door is clean and dry.
- Attach Adhesive Pads: Peel off the protective film from the double-sided adhesive pads and attach them to the back of the main alarm unit and the magnetic sensor.
- 본체 위치를 조정하십시오: Affix the main alarm unit to the door frame or the main body of the appliance.
- Position the Magnetic Sensor: Affix the smaller magnetic sensor to the door itself, ensuring it aligns with the triangular mark on the main unit when the door is closed.
- 적절한 간격을 유지하십시오: The installation distance between the main unit and the magnetic sensor should not exceed 0.6 inches (1.5 cm) when the door is closed for proper functioning.
- Optional Screw Mounting: For a more permanent installation, use the provided screws to secure the units.
Image: Detailed Installation Steps
This image illustrates the process of attaching the adhesive pads and correctly positioning the main alarm unit and magnetic sensor on a refrigerator door.
Image: Versatile Installation Locations
이 이미지는 예를 보여줍니다amples of where the alarm can be installed, including on side-by-side refrigerators, top-freezer models, and other door types.
Video: Installation Demonstration
This video provides a visual guide for installing the DAYTECH Freezer Door Alarm on a refrigerator.
작동 지침
The DAYTECH USR-6 alarm offers customizable settings for alert type, volume, and delay time.
Functional Adjustment:
- Chime/Alarm/OFF Switch: Use the slide switch on the side of the main unit to select between Chime mode (gentle alert), Alarm mode (loud alert), or OFF to disable the alarm.
- 볼륨 조절: The alarm features 5 adjustable volume levels, ranging from 0dB (mute) to 120dB. Use the volume button to cycle through the levels.
Image: Adjustable Volume and Ringtones
This image illustrates the different volume levels and the two available alert tones (chime and alarm).
지연 설정 :
The alarm offers four delay modes, allowing you to choose how long the door can remain open before an alert sounds. Press the SET 키 on the side of the main unit to cycle through the modes.
- Mode 1 (1 Minute Delay): After 1 minute, the alarm/chime sounds for 5 seconds, repeating every 15 seconds.
- Mode 2 (2 Minute Delay): After 2 minutes, the alarm/chime sounds for 10 seconds, repeating every 10 seconds.
- Mode 3 (3 Minute Delay): After 3 minutes, the alarm/chime sounds for 15 seconds, repeating every 5 seconds.
- Mode 4 (4 Minute Delay): After 4 minutes, the alarm/chime sounds for 20 seconds, repeating every 15 seconds.
Image: Four Working Modes
This image details the four available delay modes and their corresponding alert behaviors.
Video: Delay Mode Demonstration
This video demonstrates how the different delay modes function when a refrigerator door is left open.
유지
배터리 교체:
The DAYTECH USR-6 alarm requires 2 AAA batteries. When the battery is running low, the alarm will emit a shorter beep to indicate that replacement is needed.
- Gently slide the main unit upwards from its mounting plate to detach it.
- 본체 뒷면의 배터리 덮개를 여세요.
- 기존 AAA 배터리를 제거하고 새 배터리를 넣을 때 극성을 반드시 확인하세요.
- Close the battery cover and reattach the main unit to its mounting plate.
Image: Battery Replacement
This image illustrates the steps for replacing the AAA batteries in the main alarm unit.
문제 해결
- 알람이 울리지 않습니다:
- Check if the alarm is switched to "OFF". Slide the switch to "CHIME" or "ALARM".
- Ensure the main unit and magnetic sensor are within 0.6 inches (1.5 cm) when the door is closed.
- Verify that the triangular mark on the main unit aligns with the magnetic sensor.
- Replace batteries if the low battery warning is active or if the alarm is unresponsive.
- 오경보:
- Re-check the alignment and distance between the main unit and the magnetic sensor. A gap larger than 0.6 inches (1.5 cm) when closed can cause false triggers.
- Ensure the mounting surface is stable and not subject to vibrations that might cause the units to shift.
- 볼륨이 너무 낮거나 높습니다.
- Use the volume button to adjust to your desired level (0dB to 120dB).
명세서
| 모델 번호 | USR-6 |
| 치수 | 3.9 x 1.6 x 0.86인치(100 x 40 x 22mm) |
| 전원 | AAA 배터리 2개(포함) |
| 권tage | 3 볼트 |
| 소음 수준 | 0 to 120 Decibels |
| Maximum Sensor Range | 0.6 인치 (1.5cm) |
| 장착 유형 | Door Mount (Self-Adhesive or Screws) |
| 제어 방법 | Touch (for mode/volume) |
| 특별 기능 | Adjustable Delay, Adjustable Volume, Chime/Alarm Modes, Low Battery Indicator |
Image: Main Unit Diagram and Dimensions
이 이미지는 자세한 내용을 제공합니다. view of the main alarm unit, highlighting its components and physical dimensions.
보증 및 지원
DAYTECH products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your DAYTECH USR-6 Freezer and Refrigerator Door Alarm, please contact our customer service team.
You can typically find contact details on the product packaging, the official Daytech web사이트나 구매 플랫폼을 통해서도 구매할 수 있습니다.
당사는 고품질의 제품과 탁월한 고객 서비스를 제공하기 위해 최선을 다하고 있습니다.
