1. 서론
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Fermax F1391 7-inch SEE-U Video Intercom Kit. Please read this manual thoroughly before beginning installation or operation to ensure proper function and safety. This kit is designed to provide secure and convenient communication with visitors at your entrance.
2. 제품 오버view
2.1. 구성 요소
The Fermax F1391 SEE-U Video Intercom Kit includes the following main components:
- 7-inch Hands-Free Monitor: An indoor unit with a color screen and capacitive touch buttons.
- 실외 패널: A robust, weather-resistant unit with an integrated wide-angle color camera, night vision, and a call button.
- 전원 어댑터: Supplies power to the system.
- 탈착식 단자대: Facilitate easy wiring connections.
Figure 1: Fermax F1391 SEE-U Video Intercom Kit components: outdoor panel and indoor monitor.
2.2. 주요 특징
The Fermax F1391 SEE-U Video Intercom Kit offers several features for enhanced security and convenience:
- Plug-in System: 간단한 설치를 위해 설계되었습니다.
- 상호 소통: Allows communication between multiple indoor monitors within the same dwelling (supports up to 4 additional monitors without extra power).
- Dual Door Opening: Capability to open both a main and a secondary door.
- "Do Not Disturb" Mode: Mutes incoming call notifications on the indoor monitor.
- 사용자 지정 가능한 멜로디: Choose from up to 16 different call melodies with adjustable volume and repetition duration (up to 30 seconds).
- 내구성이 뛰어난 실외용 패널: Robust and waterproof (IP54 IK07) design with a protective visor and wide-angle color camera (H=115°, V=65°, D=130°) with night vision for clear visibility in low light.
3. 설정 및 설치
3.1. 안전수칙
Before beginning installation, ensure that the main power supply to the installation area is disconnected to prevent electrical shock. If you are unsure about any steps, consult a qualified electrician.
3.2. 옥외 패널 설치
The outdoor panel should be mounted at a height that allows for optimal viewing of visitors. The recommended installation height is between 1650 mm and 1700 mm from the ground, with a distance of approximately 500 mm from any adjacent wall.
- Choose a suitable location for the outdoor panel, ensuring it is protected from direct impact and excessive moisture.
- Mark the drilling points on the wall using the mounting template or the panel itself.
- 구멍을 뚫고 제공된 벽면 플러그를 꽂으세요.
- Secure the mounting bracket or the panel directly to the wall using the provided screws.
Figure 2: Recommended installation height for outdoor panel and indoor monitor.
3.3. 실내 모니터 설치
The indoor monitor should be mounted at a comfortable viewing height. The recommended installation height is approximately 1450 mm from the ground, with a distance of approximately 500 mm from any adjacent wall.
- Select a location for the indoor monitor, typically near the main entrance or in a central area.
- 모니터 장착 브래킷을 위한 드릴 구멍 위치를 표시하십시오.
- 구멍을 뚫고 벽 플러그를 삽입합니다.
- 벽에 장착 브래킷을 부착합니다.
- Connect the wiring to the monitor before securing it to the bracket.
3.4. 배선 연결
The Fermax F1391 kit uses a 2-wire system for communication between the outdoor panel and the indoor monitor. Ensure all connections are secure and correctly polarized.
- Outdoor Panel Wiring: Connect the 2-wire bus cable to the designated terminals on the back of the outdoor panel. If connecting a door lock, connect its wires to the appropriate terminals.
- Indoor Monitor Wiring: Connect the 2-wire bus cable from the outdoor panel to the corresponding terminals on the back of the indoor monitor.
- 전원 어댑터 연결: Plug the power adapter into a standard electrical outlet and connect its output cable to the power input on the indoor monitor.
Figure 3: Detailed wiring diagram for the system components.
그림 4: 후면 view of the outdoor panel showing wiring terminals.
그림 5: 후면 view of the indoor monitor showing wiring terminals.
4. 사용 설명서
Once installed and powered on, your Fermax F1391 SEE-U Video Intercom Kit is ready for use.
4.1. 전화 받기
방문객이 실외 패널의 호출 버튼을 누르면 실내 모니터에서 벨소리가 울리고 방문객의 이미지가 표시됩니다.
4.2. 전화 받기
를 누르세요 답변 button (typically represented by a phone icon) on the indoor monitor to establish two-way audio and video communication with the visitor.
4.3. View실외 패널 설치
에게 view the outdoor panel camera feed without an incoming call, press the View button (typically an eye icon) on the indoor monitor. This allows you to check your entrance at any time.
4.4. Door Opening
To open the main door, press the 도어 릴리스 button (typically a key icon) on the indoor monitor. If configured, a secondary door release button may also be available for an additional entrance.
4.5. Intercommunication (Multiple Monitors)
If multiple indoor monitors are installed within your dwelling, you can initiate calls between them for internal communication. Refer to the monitor's on-screen menu for specific instructions on initiating intercommunication calls.
4.6. 모니터 설정
The 7-inch indoor monitor features a user-friendly interface with capacitive buttons for various settings:
- 볼륨 조절: Adjust the call and communication volume.
- 멜로디 선택: Choose from 16 different ringtone melodies.
- "Do Not Disturb" Mode: Activate or deactivate this mode to silence incoming calls.
- 화면 설정: Adjust screen brightness, contrast, and color saturation.
Figure 6: Indoor monitor interface displaying settings options.
5. 유지관리
정기적인 유지보수는 비디오 인터콤 시스템의 수명 연장과 최적의 성능을 보장합니다.
- 모니터 청소: 부드럽고 마른 보풀 없는 천으로 모니터 화면을 닦으십시오.asing. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the surface.
- Cleaning the Outdoor Panel: Periodically wipe the outdoor panel, including the camera lens and call button, with a soft, damp cloth to remove dirt and debris. Ensure the camera lens is clear for optimal image quality. Do not use high-pressure water jets.
- 환경 조건: Ensure the outdoor panel is not obstructed by plants or other objects that could block the camera's view or the microphone/speaker.
6. 문제 해결
If you encounter issues with your Fermax F1391 SEE-U Video Intercom Kit, refer to the following troubleshooting guide:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No image or sound on monitor. | No power, incorrect wiring, or system off. | Check if the power adapter is plugged in and the monitor is powered on. Verify all wiring connections are secure and correct. |
| 문이 열리지 않습니다. | Incorrect wiring to door lock, faulty door lock, or insufficient power. | Check the wiring between the monitor and the door lock mechanism. Ensure the door lock itself is functional. |
| 이미지 품질이 좋지 않음(흐릿하고 어두움). | Dirty camera lens, insufficient lighting, or monitor settings. | Clean the outdoor panel camera lens. Ensure adequate lighting at the entrance. Adjust brightness/contrast settings on the indoor monitor. |
| No ringtone when call button is pressed. | "Do Not Disturb" mode active, volume too low, or faulty outdoor panel button. | Check if "Do Not Disturb" mode is deactivated. Increase the ringtone volume on the monitor. Test the outdoor panel button. |
| Intercommunication not working. | Incorrect monitor programming or wiring issues between monitors. | Ensure all monitors are correctly programmed for intercommunication. Verify wiring connections between multiple indoor monitors. |
7. 사양
Technical specifications for the Fermax F1391 SEE-U Video Intercom Kit:
| 특징 | 세부 사항 |
|---|---|
| 제조업체 | 페르맥스 |
| 모델 번호 | F01391 |
| 제품 크기(L x W x H) | 26.5 x 10.8 x 20cm |
| 무게 | 1.24 킬로그램 |
| 색상 | White (Monitor), Grey (Outdoor Panel) |
| 재료 | Grey plate, white monitor |
| 폼 팩터 | 직사각형 |
| 권tage | 15 볼트 |
| 전력 소비 | 2.5 와트 |
| 항목 수 | 1개 키트 |
| 포함된 구성 요소 | Power supply, 7" capacitive white monitor, Outdoor panel with visor |
| 필요한 배터리 | 아니요 |
| 예비 부품 가용성 | 5년 |
Figure 7: Indoor monitor dimensions (in millimeters).
Figure 8: Outdoor panel dimensions (in millimeters).
8. 보증 및 지원
Fermax products are manufactured to high-quality standards. This product is supported by a commitment to spare parts availability for 5 years from the date of purchase.
For technical assistance, warranty claims, or further support, please contact Fermax customer service. Refer to the product packaging or the official Fermax web해당 지역의 연락처 정보는 사이트에서 확인하세요.