1. 서론
This manual provides essential information for the safe and efficient operation of your Promethean UST-P1 DLP Projector. The Promethean UST-P1 is a WXGA Ultra Short Throw (UST) Projector designed for various applications, capable of displaying 3,300 Lumens at its brightest setting with a native resolution of 1280x800. It features DLP technology for higher contrast and reduced pixel visibility, and is 3D capable.
상자 안에 무엇이 들어있나요?
포장을 풀 때 아래 나열된 모든 품목이 들어 있고 상태가 양호한지 확인하세요.
- Promethean UST-P1 DLP Projector
- HDMI 케이블
- 원격 제어
- 전원 코드
- 사용 설명서 (본 문서)
Figure 1.1: Promethean UST-P1 Projector with its bundled accessories, including the projector unit, HDMI cable, remote control, and power cord.
그림 1.2: 상단 view of the Promethean UST-P1 Projector, showing the lens assembly and control panel area.
2. 설정
2.1 프로젝터 배치
The Promethean UST-P1 is an Ultra Short Throw (UST) projector, designed to project a large image from a very short distance. Place the projector on a stable, flat surface directly in front of the projection screen or wall. Ensure there are no obstructions between the projector lens and the projection surface.
2.2 전원 연결
- 제공된 전원 코드를 프로젝터 뒷면의 AC IN 포트에 연결하세요.
- 전원 코드의 다른 쪽 끝을 접지된 전기 콘센트에 꽂습니다.
2.3 비디오 소스 연결
The projector offers multiple connectivity options. Refer to the rear panel diagram for port locations.
- HDMI : Connect an HDMI cable from your video source (e.g., laptop, Blu-ray player) to the HDMI port on the projector. The projector supports HDMI 1.4a.
- VGA : Connect a VGA cable from your computer to one of the VGA In ports (VGA In 1 or VGA In 2).
- 합성 비디오: Use an RCA cable to connect to the Composite Video port for standard definition video sources.
- 네트워크(RJ-45): For network control and monitoring, connect an Ethernet cable to the RJ-45 port.
- RS232(DB-9핀): For serial control, connect a DB-9pin cable to the RS232 port.
- USB B: For service or specific control functions.
그림 2.1: 상세 view of the Promethean UST-P1 projector's rear panel, highlighting the HDMI, VGA, Composite, Network (RJ-45), RS232, and USB B connectivity options.
3. 사용 설명서
3.1 전원 켜기/끄기
- 전원 켜기: 프로젝터 제어판 또는 리모컨의 전원 버튼을 누르세요. 전원 표시등이 켜집니다.
- 전원 끄기 : Press the Power button again. A confirmation message may appear; press Power again to confirm shutdown. Allow the projector to cool down completely before unplugging it.
3.2 입력 소스 선택
To switch between connected video sources, use the "Source" or "Input" button on the remote control or the projector's control panel. Cycle through the available inputs (HDMI, VGA1, VGA2, Video) until your desired source is displayed.
3.3 이미지 조정
- 집중하다: Adjust the focus ring on the projector lens until the image is sharp and clear.
- 키스톤 보정: If the image appears trapezoidal, use the keystone correction function (usually found in the projector's OSD menu or via dedicated buttons on the remote) to square the image.
- 종횡비: The projector has a native aspect ratio of 16:10 (WXGA). You can adjust the aspect ratio settings in the menu to match your content (e.g., 4:3, 16:9) if necessary.
3.4 Supported Video Modes
The Promethean UST-P1 supports various video modes, including 720p, 1080i, 1035i, 575i, 576i, 480p, and 480i.
4. 유지관리
정기적인 유지관리를 통해 최적의 성능을 보장하고 프로젝터의 수명을 연장할 수 있습니다.
4.1 프로젝터 청소
- 외부: 부드럽고 털이 없는 천을 살짝 사용하세요.ampened with water to clean the projector's casing. 연마성 세척제나 용제 사용을 피하세요.
- 렌즈: Gently wipe the projector lens with a lens cleaning cloth or lens paper. Do not use abrasive materials or excessive force, as this can scratch the lens.
- 통풍구: Periodically check and clean the air vents to prevent dust buildup, which can impede airflow and cause overheating. Use a soft brush or compressed air to remove dust.
4.2리터amp 대사
The Promethean UST-P1 is a lamp-based projector. The lamp has a finite lifespan and will eventually need replacement. The projector will typically display a warning message when the lamp is nearing the end of its life. Refer to the projector's on-screen display (OSD) menu for lamp 시간 정보.
주의: Lamp replacement should only be performed when the projector is completely cool and unplugged from the power source. Consult a qualified technician if you are unsure about the replacement procedure.
5. 문제 해결
This section addresses common issues you might encounter with your projector. If the problem persists after trying these solutions, please contact customer support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 화면에 이미지가 없습니다. |
|
|
| 이미지가 흐릿하거나 초점이 맞지 않습니다. |
|
|
| Image is trapezoidal (not square) |
|
|
| 리모컨이 작동하지 않습니다 |
|
|
6. 기술 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | UST-P1 |
| 디스플레이 기술 | 디엘피(DLP) |
| 명도 | 3,300 ANSI 루멘스 |
| 네이티브 해상도 | 1280x800 (WXGA) |
| 종횡비 | 16:10(네이티브) |
| 대비율 | 10,000시 1분 |
| 3D 기능 | 예 |
| 연결 입력 | HDMI 1.4a, Composite (RCA), Network (RJ-45), RS232 (DB-9pin), VGA In (Dsub-15pin x 2), USB B |
| 지원되는 비디오 모드 | 720p, 1080i, 1035i, 575i, 576i, 480p, 480i |
| 특별 기능 | 크레스트론 룸View™ |
| 제품 치수 | 14.5 x 11.4 x 6.3 인치 |
| 품목 무게 | 10.6파운드 |
Figure 6.1: The bottom label of the Promethean UST-P1 projector, displaying the model number, input power requirements, and various regulatory compliance marks.
7. 보증 및 지원
For specific warranty information regarding your Promethean UST-P1 DLP Projector, please refer to the documentation provided at the time of purchase or contact the seller directly. Warranty terms and conditions may vary.
For technical support, troubleshooting assistance beyond this manual, or inquiries about replacement parts (such as lamps), please contact the seller, Tekswamp, or the official Promethean support channels.
방문할 수 있습니다 Tekswamp 아마존에서 판매하기 for more information or to contact their support.
