1. 서론
This manual provides essential information for the installation, operation, and maintenance of your Minoston Z-Wave 800 Series Smart Plug (MP31Z). Please read this manual thoroughly before using the device to ensure proper function and safety. Keep this manual for future reference.
2. 제품 오버view
The Minoston MP31Z is a compact Z-Wave 800 series smart plug designed to provide remote control and automation for connected devices. It features an updated 800 series Z-Wave chip for enhanced signal coverage and faster communication, including Z-Wave Long Range (LR) capabilities up to 1300ft (if supported by your hub). The plug supports S2 authenticated security and SmartStart for simplified pairing. It also functions as a Z-Wave repeater to strengthen your mesh network.
Image 2.1: Minoston Z-Wave 800 Series Smart Plug (MP31Z) and its packaging.
Image 2.2: Key features of the Minoston Z-Wave 800 Series Smart Plug.
주요 특징:
- Z-Wave 800 Series Chip: Provides improved signal coverage and faster communication.
- Z-Wave Long Range (LR): Extends wireless coverage up to 1300ft with compatible hubs.
- S2 인증 보안: Enhances protection against unauthorized access.
- 스마트스타트: Simplifies the setup process for automatic device inclusion.
- 내장형 리피터: Strengthens your Z-Wave mesh network.
- 컴팩트한 디자인: Allows two plugs to be used in a standard duplex outlet simultaneously.
- 원격 제어 및 예약: Control connected devices and set timers via a Z-Wave hub.
- 그룹 제어: Manage multiple Z-Wave devices with a single command.
- ETL 인증: Ensures product safety and quality standards.
3. 안전 정보
- 감전 위험: Do not expose to rain or water. Do not use in wet locations.
- 실내에서만 사용 가능: 이 장치는 건조한 실내 환경에서 사용하도록 설계되었습니다.
- 최대 하중: Do not exceed the specified electrical ratings (125V, 15A, 1875W). Overloading may cause overheating and fire.
- 기기 호환성: Ensure the appliance connected to the smart plug is suitable for remote control. Do not use with appliances that could create hazardous conditions if turned on unexpectedly (e.g., heating elements, power tools).
- 유지: 장치를 수리하거나 개조하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
4. 패키지 내용
- 1 x Minoston Z-Wave Smart Plug (MP31Z)
- 1 x 사용 설명서(이 문서)
5. 설정 및 설치
A Z-Wave certified hub (sold separately) is required to utilize the smart features of this plug. Compatible hubs include SmartThings, Hubitat, Vera, Fibaro, Homeseer, and others.
5.1 물리적 설치
- 전원 콘센트에 쉽게 접근할 수 있는지 확인하십시오.
- Plug the Minoston MP31Z Smart Plug into a standard 120V AC wall outlet. The LED indicator on the plug will illuminate.
- Connect the appliance you wish to control into the smart plug. Ensure the appliance's power requirements do not exceed the plug's maximum rating (15A, 1875W).
Image 5.1: Minoston Smart Plug dimensions and features.
5.2 Z-Wave Network Inclusion (Adding the Device)
The Minoston MP31Z supports SmartStart for easy inclusion or traditional manual inclusion.
Image 5.2: Z-Wave setup methods.
SmartStart Inclusion (Recommended for compatible hubs):
- Z-Wave 허브가 SmartStart를 지원하는지 확인하십시오.
- Open your Z-Wave hub's mobile application.
- Select the option to 'Add Device' or 'Scan QR Code'.
- Scan the QR code located on the smart plug or its packaging.
- Plug the Minoston MP31Z into a power outlet. The device should automatically be added to your Z-Wave network.
- If prompted, press the program button on the side of the plug three times quickly to confirm inclusion.
Image 5.3: SmartStart QR code scanning for device inclusion.
매뉴얼 포함:
- Plug the Minoston MP31Z into a power outlet.
- Put your Z-Wave hub into 'Inclusion' or 'Add Device' mode (refer to your hub's manual for specific instructions).
- Press the program button on the side of the smart plug three times quickly. The LED indicator will flash to confirm inclusion mode.
- Your hub should detect and add the device. The LED will stop flashing and remain solid blue or green (depending on hub communication) once successfully included.
- If prompted, enter the DSK (Device Specific Key) or PIN code found on the product or packaging.
Image 5.4: Program button for inclusion/exclusion.
6. 운영
6.1 수동 제어
Press the program button on the side of the smart plug once to manually turn the connected appliance ON or OFF.
6.2 Z-Wave 허브를 통한 원격 제어
Once successfully included in your Z-Wave network, you can control the smart plug remotely using your Z-Wave hub's application on a smartphone, tablet, or computer.
Image 6.1: Remote control via Z-Wave hub application.
6.3 타이머 및 일정 설정
Use your Z-Wave hub's application to create custom schedules and timers for the smart plug. This allows connected appliances to turn ON or OFF automatically at specific times or based on events.
이미지 6.2: Example of setting a timer for an appliance.
6.4 그룹 제어
Many Z-Wave hubs allow you to group multiple smart plugs or other Z-Wave devices. This enables simultaneous control of several devices with a single command, useful for managing lights in a room or multiple appliances.
6.5 음성 제어
If your Z-Wave hub is integrated with voice assistants like Amazon Alexa or Google Assistant, you can control the smart plug using voice commands.
Image 6.3: Voice control functionality.
7. Z-Wave 네트워크 제외(장치 제거)
To remove the Minoston MP31Z Smart Plug from your Z-Wave network:
- Plug the Minoston MP31Z into a power outlet.
- Put your Z-Wave hub into 'Exclusion' or 'Remove Device' mode (refer to your hub's manual for specific instructions).
- Press the program button on the side of the smart plug three times quickly. The LED indicator will flash to confirm exclusion mode.
- Your hub should confirm the device has been removed. The LED will stop flashing and turn off or revert to its default state.
8. 고급 기능
8.1 Z-Wave Repeater Functionality
The Minoston MP31Z acts as a Z-Wave signal repeater. This means it receives Z-Wave commands and re-transmits them to other Z-Wave devices, extending the overall range and reliability of your Z-Wave mesh network. For optimal network performance, strategically place repeaters throughout your home.
8.2 Z-Wave Long Range (LR)
Equipped with the 800 series chip, this plug supports Z-Wave Long Range (LR) technology. When paired with a Z-Wave LR compatible hub, it can achieve significantly extended wireless communication distances, up to 1300 feet, reducing the need for multiple repeaters in large areas.
8.3 S2 Authenticated Security
The MP31Z incorporates S2 security, providing advanced encryption for communication between the device and your Z-Wave hub. This enhances protection against unauthorized access and tampering, contributing to a more secure smart home environment.
Image 8.1: SmartStart and S2 Security benefits.
9. 문제 해결
- 장치가 응답하지 않음:
- Ensure the plug is securely inserted into the outlet and receiving power.
- 연결된 기기를 일반 콘센트에 직접 꽂았을 때 정상적으로 작동하는지 확인하십시오.
- Check the Z-Wave hub's status and network connectivity.
- Try re-including the device into your Z-Wave network.
- 포함/제외 실패:
- Ensure the plug is within range of your Z-Wave hub during the inclusion/exclusion process.
- Confirm your Z-Wave hub is in the correct inclusion/exclusion mode.
- Perform an 'Exclusion' first, even if the device was never included, to clear any lingering network data. Then attempt inclusion again.
- Refer to your Z-Wave hub's instruction manual for specific troubleshooting steps.
- Poor Z-Wave range or intermittent connection:
- Z-Wave signals can be affected by obstacles like thick walls, large metal objects, or other electronic devices.
- Relocate the smart plug or your Z-Wave hub to improve signal path.
- Add more Z-Wave repeater devices (like this smart plug) to strengthen your mesh network.
- Ensure your hub supports Z-Wave Long Range (LR) to benefit from the extended range capabilities of the MP31Z.
10. 사양
| 매개변수 | 값 |
|---|---|
| 모델 번호 | MP31Z (800S) |
| 힘 | 125V AC, 60Hz |
| 최대 부하 | 15A, 1875W Resistive |
| Z파 주파수 | 908.42MHz |
| 작동 온도 | 32-104° 화씨(0-40° 섭씨) |
| 제품 크기(높이x너비x깊이) | 1.46 x 2.52 x 1.18 인치 |
| 재료 | 폴리카보네이트(PC) |
| 인증 | ETL 등록됨 |
11. 유지관리
The Minoston MP31Z Smart Plug requires minimal maintenance. To clean the device, wipe it with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the device is unplugged before cleaning.
12. 보증 및 지원
미노스톤 제품은 뛰어난 신뢰성과 성능을 위해 설계되었습니다. 보증 정보 또는 기술 지원이 필요하시면 구매 시 제공된 연락처 정보를 참조하시거나 미노스톤 공식 웹사이트를 방문하십시오. website. Please have your model number (MP31Z) and purchase information ready when contacting support.
13. 규정 준수
This device complies with Part 15 of the FCC Rules and is ETL Listed, indicating adherence to North American safety standards. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
