1. 서론
The ATOMSTACK A6 Pro is a high-performance laser engraving and cutting machine designed for precision and ease of use.Featuring a 6W ultra-high performance laser module and advanced blue-ray laser point compression technology,it offers exceptional cutting ability and fine engraving detail. Its integrated design ensures quick setup,making it suitable for various creative and professional applications.
그림 1.1: The ATOMSTACK A6 Pro Laser Engraving Machine, showcasin컴팩트하고 통합된 디자인이 특징입니다.
2. 안전 정보 및 경고
경고: Laser engraving machines emit powerful laser radiation. Improper use can cause serious injury, including eye damage and skin burns.Always adhere to the following safety guidelines:
- 눈 보호: Always wear appropriate laser safety goggles when operating the machine. Never look directly into the laser beam or its reflection.
- 통풍: Operate the machine in a well-ventilated area to dissipate fumes and smoke produced during engraving and cutting. Consider an exhaust system.
- 화재 위험: 레이저 가공은 가연성 물질에 불을 붙일 수 있습니다. 작동 중에는 기계를 절대 방치하지 마십시오. 소화기를 가까이에 두십시오.
- 재료 호환성: Only engrave or cut materials specified as safe for laser processing. Avoid materials that produce toxic fumes or can easily ignite.
- 어린이와 애완동물: 작동 중에는 어린이와 애완동물을 기계 가까이에 두지 마십시오.
- 전원 공급 장치: Use only the specified power adapter (AC 24V 5A) for the machine.
- 비상 정지 : 비상 정지 버튼의 위치와 작동 방법을 숙지하세요.
그림 2.1: Product information label including critical safety warnings regarding direct or scattered radiation.
3. 설정 및 설치
The ATOMSTACK A6 Pro is designed for minimal setup, allowing you to start working quickly.
3.1 풀기
- 기계와 모든 구성품을 포장에서 조심스럽게 꺼내세요.
- Verify that all parts are present according to the packing list (refer to your product's specific packing list).
그림 3.1: The ATOMSTACK A6 Pro is designed for immediate use upon unboxing, requiring no complex assembly.
3.2 초기 배치 및 연결
- 기기를 안정적이고 평평하며 불연성 표면에 놓으십시오. 환기 및 작동을 위해 기기 주변에 충분한 공간을 확보하십시오.
- 전원 어댑터를 기기에 연결한 다음 적절한 전원 콘센트에 연결하십시오.
- Ensure the laser module is securely seated and the tank chain bundling for cables is properly aligned to prevent tangling.
그림 3.2: The tank chain bundling system ensures smooth and tangle-free cable operation, enhancing machine longevity.
4. 사용 설명서
The ATOMSTACK A6 Pro offers versatile engraving and cutting capabilities.
4.1 소프트웨어 설치 및 연결
The ATOMSTACK A6 Pro is compatible with Atomstack's self-developed PC software and supports various control methods.
- Download and install the latest version of Atomstack's PC software from the official website or use the provided mobile application.
- Connect the machine to your computer via USB or Wi-Fi (if supported by your model). For mobile app control, connect your device to the machine's hotspot.
- Ensure the software recognizes the machine before proceeding.
그림 4.1: 위에view of the Atomstack self-developed PC software, designed for user-friendly interaction and creative projects.
4.2 레이저 초점 맞추기
The A6 Pro features a fixed focusing design for quick and accurate focusing.
- 조각할 재료를 조각대 위에 올려놓으세요.
- Adjust the laser module height according to the material thickness until the laser spot is at its smallest and sharpest point. This typically takes less than 10 seconds.
- For precise positioning, utilize the cross-positioning system for visual edge finding and object alignment.
그림 4.2: The cross-positioning system aids in precise and horizontal engraving, allowing for quick and accurate focusing.
4.3 조각 및 절단
The A6 Pro is capable of engraving and cutting various materials with high precision.
- 재료 준비: Ensure your material is clean and securely placed on the engraving bed.
- 디자인 가져오기: 소프트웨어 내에서 디자인을 가져오거나 새로 만드세요.
- 매개 변수 설정 : Adjust laser power, speed, and passes based on the material type and desired outcome. The 6W laser can cut through 3mm poplar wood, 3mm black acrylic, 3mm poplar plywood, and laser vinyl.
- 작업 시작: 소프트웨어에서 조각 또는 절단 공정을 시작하십시오. 작동 중에는 기계를 면밀히 관찰하십시오.
그림 4.3: The ATOMSTACK A6 Pro is suitable for engraving and cutting a variety of materials including basswood, acrylic, pine wood, paulownia, bamboo, and leather.
그림 4.4: The A6 Pro demonstrates significantly faster engraving speeds compared to traditional frame machines, enhancing work efficiency.
5. 유지관리
정기적인 유지 관리는 ATOMSTACK A6 Pro의 수명 연장과 최적의 성능을 보장합니다.
- Laser Module Cleaning: The non-clogging laser module is designed to resist lens pollution. However, periodic inspection and gentle cleaning of the laser lens with a suitable optical cleaner and lint-free cloth are recommended to maintain optimal laser performance.
- 레일 청소: Keep the X-axis metal double guide rails clean and free of dust and debris to ensure smooth and precise movement.
- 일반 청소: Wipe down the machine's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- 케이블 검사: Periodically check the tank chain bundled cables for any signs of wear or damage.
6. 문제 해결
This section addresses common issues you might encounter with your ATOMSTACK A6 Pro.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 기계의 전원이 켜지지 않습니다. | Power cable not connected; faulty power adapter; power switch off. | Ensure power cable is securely connected. Check power outlet. Verify power switch is in the ON position. |
| 레이저가 발사되지 않거나 약합니다. | Laser module not properly focused; dirty lens; incorrect software settings; laser module malfunction. | Re-focus the laser. Clean the laser lens. Check laser power settings in software. Contact support if issue persists. |
| Engraving/cutting results are inaccurate or distorted. | Loose belts/rails; material not flat; incorrect software settings; vibrations. | Check for any loose components or debris on the guide rails. Ensure material is flat and secured. Verify design and parameter settings in software. Minimize external vibrations. |
| 소프트웨어가 기기에 연결되지 않습니다. | Incorrect USB port; driver issues; Wi-Fi connection problems. | Try a different USB port. Reinstall drivers. For Wi-Fi, ensure you are connected to the machine's hotspot. Restart both machine and computer/device. |
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | A6 프로 |
| 상표 | 아톰스택 |
| 레이저 파워 | 6W (광 출력) |
| 레이저 스팟 크기 | 0.05 x 0.05 mm (Ultra-fine) |
| 조각 영역 | 370 x 310mm |
| 기계적 정밀도 | 최대 0.02mm |
| 최대 조각 속도 | 600mm/초 |
| 전원 입력 | 교류 24V 5A |
| 제품 치수 | 60 x 60 x 17cm |
| 품목 무게 | 8.26kg |
| 마더보드 | Self-developed 32-bit ESP32 motherboard |
| Supported Materials (Cutting) | 3mm Poplar Wood, 3mm Black Acrylic, 3mm Poplar Plywood, Laser Vinyl |
| Supported Materials (Engraving) | Basswood, Acrylic, Pine wood, Paulownia, Bamboo, Leather, etc. |
그림 7.1: The ATOMSTACK A6 Pro features an upgraded self-developed 32-bit motherboard for faster data processing.
그림 7.2: The unibody frame and modular assembly contribute to a mechanical precision of up to 0.02mm.
8. 보증 및 지원
ATOMSTACK provides customer support and warranty services for its products.
- 보증 정보: Please refer to the warranty card included with your product or visit the official ATOMSTACK web자세한 보증 약관은 해당 사이트에서 확인하세요.
- 기술 지원: For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact ATOMSTACK customer support.
- 연락처 이메일: support@atomstack.com
- 제조업체: Shenzhen Atomstack Technologies Co., Ltd.
- 주소: 17th Floor, Building 3A, Phase II, Intelligent Park, No.76.Baohe Avenue, Baolong Street, Longgang Dist., Shenzhen, 518172China.