FIFINE K726 카디오이드 콘덴서 마이크 사용 설명서

1. 서론

The FIFINE K726 is a professional cardioid condenser microphone designed for high-quality audio capture in various applications, including studio recording, gaming, streaming, and podcasts. It features an XLR output, a shock mount, a pop filter, and noise reduction technology to deliver clear and crisp sound. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your K726 microphone.

2. 패키지 내용

• FIFINE K726 Condenser Microphone
• 쇼크 마운트
• 팝 필터
• XLR to 1/4" Cable

3. 설정 지침

Follow these steps to set up your FIFINE K726 microphone:

1. 쇼크 마운트를 부착하세요: Securely fasten the shock mount to a compatible microphone stand or boom arm. The shock mount isolates the microphone from vibrations and handling noise.
2. 마이크 삽입: Carefully place the FIFINE K726 microphone into the shock mount. Ensure it is firmly seated.
3. 팝 필터를 부착하세요: Position the pop filter in front of the microphone. The pop filter helps to reduce plosive sounds (e.g., 'p' and 'b' sounds) and protects the microphone from moisture.
4. XLR 케이블을 연결합니다: Connect one end of the provided XLR to 1/4" cable to the XLR output on the microphone.
5. 오디오 인터페이스/믹서에 연결하세요: Connect the other end of the XLR cable to an audio interface, mixer, or PA system that provides 48V phantom power. Note: The K726 requires 48V phantom power to operate. An audio interface or mixer is not included with the microphone.
6. 

   The FIFINE K726 microphone requires 48V phantom power, which can be supplied by a mixer or an audio interface (not included).
7. 마이크 배치: For optimal sound capture and background noise reduction, position the microphone with the FIFINE logo facing directly towards the sound source (e.g., your mouth). The cardioid pickup pattern is designed to capture sound primarily from the front while minimizing sound from the sides and rear.
8. 

   The FIFINE K726 microphone features a cardioid polar pattern, designed to effectively reduce background noise and capture sound primarily from the front. This ensures clear and focused audio recordings.

4. 사용 설명서

Once set up, the FIFINE K726 is ready for use in various audio recording and broadcasting scenarios:

• 전원 켜기: Ensure your audio interface or mixer is powered on and providing 48V phantom power to the microphone.
• 게인 조정: Adjust the gain level on your audio interface or mixer. The K726 may require a bit more gain compared to some other microphones to achieve optimal signal levels. Monitor your audio levels to prevent clipping or distortion.
• 사운드 품질: The K726 features a built-in dynamic core and inner double-layer pop filter, along with noise isolation technology, to deliver a well-balanced reproduction across a wide frequency response range of 20Hz-20kHz. This results in clean and mellow audio.
• 

  The FIFINE K726 is engineered to restore true and clear sound, providing high-fidelity audio for various applications.

• 응용 프로그램: This microphone is suitable for podcasting, vocal recording, streaming, and general content creation.
• 

  The FIFINE K726 is a versatile microphone suitable for multiple applications including podcasting, vocal recording, streaming, and content creation.

5. 유지관리

Proper maintenance ensures the longevity and optimal performance of your microphone:

• 청소: 부드럽고 마른 천을 사용하여 마이크 본체를 닦으세요. 액체 세척제나 용제는 마감재나 내부 부품을 손상시킬 수 있으므로 사용하지 마세요.
• 팝 필터: The pop filter can be gently cleaned with a soft brush if dust or debris accumulates.
• 저장: When not in use, store the microphone in a dry, dust-free environment. It is recommended to keep it in its original packaging or a protective case.
• 습기를 피하세요: Keep the microphone away from water and high humidity to prevent damage to electronic components.
• 조심스럽게 다루십시오: The microphone is a precision instrument. Avoid dropping it or subjecting it to strong impacts.

6. 문제 해결

If you encounter issues with your FIFINE K726 microphone, refer to the following troubleshooting tips:

• 사운드 출력 없음:
  • XLR 케이블이 마이크와 오디오 인터페이스/믹서에 제대로 연결되어 있는지 확인하십시오.
  • Verify that the audio interface/mixer is powered on and providing 48V phantom power. Many interfaces have an indicator light for phantom power.
  • Check the input selection and gain settings on your audio interface/mixer.
  • Confirm that your computer or recording device recognizes the audio interface and that the correct input is selected in your software.
• 낮은 볼륨 또는 약한 신호:
  • Increase the gain level on your audio interface or mixer. The K726 may require higher gain settings.
  • Ensure the microphone is positioned correctly, with the FIFINE logo facing the sound source, and at an appropriate distance.
  • Check for any attenuator pads or input sensitivity settings on your audio interface that might be reducing the signal.
• 과도한 배경 소음:
  • Confirm the microphone is positioned correctly, utilizing its cardioid pickup pattern to reject off-axis sounds.
  • Ensure the pop filter is properly installed to reduce plosives and breath noises.
  • Check for environmental noise sources (fans, air conditioners, computer hum) and try to minimize them.
  • Verify that the XLR cable is not damaged or experiencing interference.
• 왜곡된 소리:
  • Reduce the gain level on your audio interface or mixer if the signal is clipping (exceeding maximum input level).
  • Ensure the microphone is not too close to the sound source, which can cause proximity effect or overload the capsule.
  • 손상된 케이블이나 잘못된 연결 부분이 있는지 확인하세요.

7. 사양

8. 보증 및 지원

For warranty information and technical support, please contact FIFINE Technology or the authorized seller from whom you purchased the product. Specific warranty terms may vary by region and retailer.

제조사 연락처: FIFINE 기술

Importer/Packer Contact (India): Origin Marketing Pvt. Ltd. Contact: 9870294946, service@originmarketing.in