1. 서론
This manual provides essential instructions for the setup, operation, and maintenance of your Zerone V1 Smart Fingerprint Leather Wallet. Please read this guide thoroughly to ensure proper use and to maximize the lifespan of your product.
Figure 1: The Zerone V1 Smart Fingerprint Leather Wallet in a closed position, showcasing its sleek black leather design and integrated fingerprint lock mechanism on the side.
2. 제품 오버view
The Zerone V1 Smart Fingerprint Leather Wallet combines secure storage with advanced biometric technology. It features a durable leather exterior, multiple compartments, and a capacitive fingerprint sensor for quick and secure access.
Figure 2: A detailed diagram highlighting key features of the wallet, including the zipper, two-in-one zipper head, Type-C charging port, fingerprint sensor, indicator light, wrist band, rivet, inner patch pocket, card positions, main area, and inner chain bag.
3. 설정 지침
3.1 초기 충전
Before first use, fully charge the wallet. Connect the provided USB Data Line to the Type-C charging port on the wallet and to a standard USB power source (e.g., computer, wall adapter). The indicator light will show charging status.
3.2 Fingerprint Registration (Administrator)
- When the fingerprint lock is empty (first use), any finger can unlock it. This is the initial state for setting up the administrator.
- To register the first fingerprint (administrator), press and hold the fingerprint sensor until the indicator light changes (e.g., blue light flashes).
- Place your finger on the sensor, lift, and repeat several times from different angles until the indicator light confirms successful registration (e.g., green light). This first registered fingerprint becomes the administrator.
3.3 Adding User Fingerprints
Once an administrator fingerprint is set, other fingerprints can be added. The wallet supports up to 10 fingerprints in total.
- Unlock the wallet using the administrator fingerprint.
- While unlocked, press and hold the fingerprint sensor until the indicator light changes to registration mode.
- Place the new user's finger on the sensor, lift, and repeat several times from different angles until the indicator light confirms successful registration.
- Repeat for additional users as needed.
4. 사용 설명서
4.1 지문으로 잠금 해제
To unlock the wallet, simply place a registered finger on the fingerprint sensor. The lock will disengage within 0.5 seconds, indicated by a green light, allowing you to open the zipper.
Figure 3: A user's finger is shown interacting with the integrated fingerprint sensor on the side of the wallet, demonstrating the unlocking process.
4.2 Locking the Wallet
To secure the wallet, ensure the zipper is fully closed and the two-in-one zipper head is positioned correctly over the fingerprint lock card position. The lock will automatically engage.
4.3 지갑 충전
When the battery is low, the indicator light may flash red. Connect the wallet to a power source using the Type-C USB cable. A full charge supports approximately 2500-3000 lock and unlock sessions.
Video 1: A short demonstration of the smart fingerprint wallet being held and the fingerprint unlocking mechanism in action. This video illustrates the ease of access using the biometric sensor.
5. 유지관리
5.1 청소
Wipe the leather exterior with a soft, dry cloth. For minor stains, use a slightly damp 천으로 닦아내고 즉시 말리세요. 강한 화학 물질이나 연마성 세제는 사용하지 마세요.
5.2 배터리 관리
To prolong battery life, avoid fully discharging the wallet frequently. Charge it regularly, especially if it will be stored for an extended period.
5.3 보관
Store the wallet in a cool, dry place away from direct sunlight and extreme temperatures. Ensure it is not exposed to excessive moisture.
6. 문제 해결
- 지문이 인식되지 않음: Ensure your finger is clean and dry. Try repositioning your finger on the sensor. If multiple attempts fail, try another registered finger.
- Wallet Not Unlocking: Check if the battery is charged. If the battery is completely depleted, charge it for a few minutes before attempting to unlock.
- 표시등이 반응하지 않음: This may indicate a very low battery. Connect the wallet to a charger.
- Cannot Register New Fingerprint: Ensure you are using an administrator fingerprint to initiate the registration process. The wallet supports a maximum of 10 fingerprints.
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 품목 유형 | Smart Fingerprint Wallet |
| 색상 | 검은색 |
| 재료 | High-Grade Leather (Exterior), Polyester (Inner) |
| 크기 | 약 245 x 60 x 145mm (9.6 x 2.4 x 5.7인치) |
| 무게 | 약 380g(13.4oz) |
| 오프닝 방법 | 지퍼 |
| 배터리 | 3.7V ≥ 120mAh (Included) |
| Type-C 입력 | 5V / 200mA |
| 운영 볼륨tage | 3.7V / 120mA |
| Finger Collection Time | ≤0.5초 |
| Finger Matching Time | ≤1초 |
| 지문 용량 | 10 |
| 표시등 | 빨간색, 파란색, 초록색 |
| 작동 온도 | -20-55 ° C |
| 작동 습도 | 상대습도 40~90% |
| 특징 | RFID Protected |
8. 보증 및 지원
For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact Zerone customer service. Keep your purchase receipt as proof of purchase.
