매뉴얼+

Flashforge Adventurer 5M Pro

Flashforge Adventurer 5M Pro 3D 프린터 사용 설명서

Your comprehensive guide to setting up, operating, and maintaining your Adventurer 5M Pro 3D Printer.

1. 서론

The Flashforge Adventurer 5M Pro is an advanced 3D printer designed for efficiency and high-quality output. Featuring a Core XY structure, automatic leveling, and a dual air filtration system, it offers a streamlined printing experience for various applications. This manual provides essential information to help you get started and maximize the potential of your printer.

Flashforge Adventurer 5M Pro 3D Printer with a purple and blue crystal model inside.

Figure 1: The Flashforge Adventurer 5M Pro 3D Printer.

2. 안전 정보

부상이나 기기 손상을 방지하기 위해 프린터를 작동하기 전에 모든 안전 지침을 읽고 숙지하십시오.

  • 뜨거운 표면: The print nozzle and build plate reach high temperatures during operation. Avoid touching these components directly to prevent burns. Allow the printer to cool down before performing maintenance.
  • 움직이는 부품: Keep hands, hair, and loose clothing clear of moving parts during operation to prevent entanglement or injury.
  • 통풍: Operate the printer in a well-ventilated area. While the Adventurer 5M Pro features a dual filtration system, some materials may still produce fumes.
  • 전원 공급 장치: Use only the provided power cable and ensure the printer is connected to a grounded outlet. Disconnect power before performing any maintenance or when the printer is not in use.
  • 어린이와 애완동물: 프린터가 작동하는 동안에는 어린이와 애완동물이 프린터에 접근하지 못하도록 하세요.

3. 상자 안에 무엇이 들어있나요?

Upon unboxing your Flashforge Adventurer 5M Pro, verify that all components are present:

  • Adventurer 5M Pro 3D Printer (installed with 0.4mm nozzle)
  • 0.6mm High-Strength Nozzle (1 pc)
  • 250g Burnt Titanium PLA Filament
  • 스풀 홀더(나사 2개 포함)
  • 도구 키트
  • 전원 케이블
  • USB 드라이브
  • 빠른 시작 가이드
  • 아교
  • 유지
  • 막힘 풀기 핀 도구
  • 드라이버
  • 앨런 렌치
  • 대각선 플라이어
Diagram showing all included accessories: 3D printer, after-sales service card, service card, 50g PLA, power cable, unclogging pin tool, screwdriver, filament rack, grease, Allen wrench, diagonal pliers, glue, and quick start guide.

Figure 2: Included accessories and tools.

4. 설정

4.1 초기 배치 및 전원 연결

Place the printer on a stable, level surface in a well-ventilated area. Connect the power cable to the printer and a grounded electrical outlet.

4.2 자동 레벨링

The Adventurer 5M Pro features one-click automatic leveling for precise first layers. Follow the on-screen prompts on the printer's touchscreen to initiate the leveling process. This eliminates manual adjustments, ensuring optimal bed adhesion.

Illustration of the printer's automatic leveling system with multiple build plate options: PEI Powder Coated, Smooth PC Plate, and Smooth PEI.

Figure 3: Automatic leveling and various build plate options.

4.3 Nozzle Installation and Removal

The printer comes with a 0.4mm nozzle installed and a 0.6mm high-strength nozzle included. Optional 0.25mm and 0.8mm nozzles are available. Nozzles can be quickly detached and replaced in approximately 3 seconds by pressing a release button.

Image demonstrating the 3-second quick detach nozzle feature, showing different nozzle sizes (0.25mm, 0.4mm, 0.6mm, 0.8mm) and a hand pressing the release button on the extruder.

Figure 4: Quick detach nozzle system.

4.4 필라멘트 로딩

Load the filament onto the spool holder at the rear of the printer. Guide the filament into the extruder according to the instructions on the touchscreen. The direct drive extruder supports various materials.

4.5 소프트웨어 설치

Install the FlashPrint slicing software on your computer. The printer is also compatible with Prusa Slicer, Cura, and Orca Slicer. Refer to the Quick Start Guide for detailed software setup instructions.

5. 사용 설명서

5.1 인쇄 시작

Prepare your 3D model using your preferred slicing software. Transfer the G-code file to the printer via USB drive, Wi-Fi, Ethernet, or cloud connection. Select the file 프린터의 4.3인치 터치스크린에서 인쇄를 시작하세요.

Image showing the Flashforge Adventurer 5M Pro being used in various settings, highlighting its ease of use for beginners, home, and educational applications, with a claim of '10 mins Print Right Out Of Box'.

Figure 5: Ready to print in minutes.

5.2 Print Monitoring and Control

The Adventurer 5M Pro supports remote monitoring via its built-in camera and the 'FLASH MAKER' mobile app. You can monitor prints in real-time, adjust parameters, and receive alerts.

Screenshots of the mobile app 'FLASH MAKER' showing real-time monitoring, parameter adjustment, batch file sending, and message alerts for remote control of the 3D printer.

Figure 6: Mobile app for remote control and monitoring.

5.3 Filament Detection and Resume Printing

The printer is equipped with a filament detection sensor that pauses printing if the filament runs out or breaks. The resume printing function allows you to continue a print after a power outage or filament change, minimizing material waste.

Illustrations showing the resume printing feature after a power cut and the filament detection sensor preventing print failures.

Figure 7: Resume printing and filament detection features.

5.4 자동 종료

The printer can be configured for automatic shutdown upon completion of a print, enhancing safety and energy efficiency.

5.5 재료 호환성

The Adventurer 5M Pro supports a wide range of filaments, including PLA/PLA Pro, HS PLA, ABS/ABS Pro, PETG/PETG Pro, HS PETG, ASA/ASA-CF, TPU, PC, PLA-CF, and PETG-CF.

Collage of various 3D printed objects made from different filament types: PLA/PLA+, ABS/ABS Pro, PETG/PETG Pro, ASA, TPU, PC, PLA-CF, and PETG-CF.

Figure 8: Supported filament types and examp르 프린트.

6. 유지관리

6.1 노즐 교체

Regularly inspect the nozzle for wear or damage. Replace the nozzle as needed using the quick detach mechanism. Refer to Section 4.3 for details.

6.2 Build Plate Care

Clean the build plate after each print to ensure optimal adhesion for subsequent prints. Use isopropyl alcohol (IPA) to remove any residue. For stubborn adhesion issues, apply a thin layer of the provided glue stick.

6.3 공기 여과 시스템

The printer features a dual air filtration system with HEPA and activated carbon filters for both internal and external circulation. Regularly check and replace the filters to maintain effective particle and VOC removal.

Diagram illustrating the dual air filtration system of the Adventurer 5M Pro, showing internal circulation for ABS/ASA/PC/CF and external circulation (HEPA + activated carbon) for PLA/PETG.

Figure 9: Dual air filtration system.

6.4 일반 청소

Keep the printer clean and free of dust and debris. Use a soft, dry cloth to wipe down exterior surfaces. Avoid using abrasive cleaners or solvents.

7. 문제 해결

이 섹션에서는 운영 중에 발생할 수 있는 일반적인 문제에 대해 설명합니다.

  • 첫 번째 레이어 접착력이 좋지 않음: Ensure the build plate is clean and free of grease. Re-run the automatic leveling process. Consider using the provided glue stick for enhanced adhesion.
  • 노즐 막힘: If the nozzle is clogged, try using the unclogging pin tool. If the clog persists, replace the nozzle. Ensure proper filament loading and storage to prevent moisture absorption.
  • Print Quality Issues (e.g., ghosting, warping): Verify that the printer is on a stable surface. Ensure the chamber temperature is appropriate for the filament being used. The printer features vibration compensation to minimize ghosting.
  • 필라멘트가 압출되지 않음: Check if the filament is properly loaded and not tangled. Ensure the nozzle is not clogged and has reached the correct temperature.
  • 프린터가 연결되지 않습니다: Verify Wi-Fi or Ethernet connections. Restart the printer and your network router if necessary.

8. 사양

Detailed specifications table for the Flashforge Adventurer 5M Pro, including extruder quantity, camera, nozzle diameter, extruder temperature, max plateform temp, working temperature, max travel speed, max acceleration, filament type, build volume, layer thickness, printing precision, power supply, device size, input/output, net weight, and operating system compatibility.

Figure 10: Flashforge Adventurer 5M Pro Technical Specifications.

특징사양
모델 번호모험가 5M 프로
볼륨을 빌드하세요220 x 220 x 200mm
최대 인쇄 속도300 mm/s (Recommended), 600 mm/s (Max Travel Speed)
최대 가속도20000mm/s²
노즐 직경0.4 mm (default), 0.25/0.6/0.8 mm (optional)
최대 압출기 온도280도
최대 플랫폼 온도110도
필라멘트 호환성PLA/ABS/PETG/ASA/TPU/PC/PLA-CF/PETG-CF
연결성Wi-Fi, USB, Ethernet, Cloud
운영 체제Win7/8/10/11, Linux, Mac OS
순중량14.6kg
장치 크기38P x 40l x 45.3H cm

9. 보증 및 지원

For warranty information, technical support, or service inquiries, please refer to the official Flashforge web사이트를 방문하거나 고객 지원팀에 직접 문의하세요. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.

관련 문서 - 모험가 5M 프로

사전view Flashforge Adventurer 5M 시리즈 3D 프린터: 빠르고 사용하기 쉽고 고품질
Flashforge Adventurer 5M 및 5M Pro 3D 프린터를 살펴보세요. 원클릭 자동 레벨링, 최대 600mm/s의 고속 출력, Core XY 구조, 빠른 노즐 교체, 고급 공기 필터 시스템 등 효율적이고 고품질의 3D 출력을 위한 다양한 기능을 확인해 보세요.
사전view 플래시포지 크리에이터 3(강화 노즐 포함)용 탄소 섬유 필라멘트 출력 가이드
플래시포지 크리에이터 3 3D 프린터에서 탄소 섬유 복합 필라멘트를 사용하여 출력하는 방법에 대한 가이드입니다. 특히 강화 노즐 사용법에 중점을 두고 일반적인 출력 문제를 방지하는 팁을 제공합니다.
사전view Flashforge Adventurer 5M 시리즈: 빠르고 사용하기 쉬운 3D 프린터
플래시포지 어드벤처 5M 시리즈 3D 프린터를 만나보세요. 원클릭 작동, 고속 출력, 자동 레벨링, 견고한 디자인이 특징입니다. 초보자, 가정, 교육 기관에 이상적입니다.
사전view Flashforge Adventurer 5M 고속 3D 프린터 사용자 가이드
이 사용자 가이드는 Flashforge Adventurer 5M 고속 FDM 3D 프린터의 설치, 작동, 소프트웨어, 유지 관리 및 문제 해결을 포함한 포괄적인 지침을 제공합니다. 자세한 기능 및 활용법에 대한 안내를 통해 최상의 인쇄 경험을 누리세요.
사전view FlashForge Adventurer 4 시리즈 사용자 가이드
FlashForge Adventurer 4 시리즈 3D 프린터에 대한 종합 사용자 가이드입니다. 설치, 작동, 인터페이스 탐색, 필라멘트 관리, 인쇄 방식(Wi-Fi, USB, 클라우드), 유지 관리 및 문제 해결에 대해 알아보세요. Adventurer 4 및 Adventurer 4 Lite의 사양 정보도 포함되어 있습니다.
사전view Flashforge Adventurer 5M Pro User Guide: Setup, Printing, and Maintenance
Comprehensive user guide for the Flashforge Adventurer 5M Pro 3D printer, covering setup, software installation, printing methods, maintenance, and troubleshooting.