1. 서론
Thank you for choosing the XCQQ S8L-Elongated Bidet Toilet Seat. This manual provides essential information for the safe installation, operation, and maintenance of your new bidet toilet seat. Please read these instructions thoroughly before installation and retain them for future reference.
Image 1.1: The XCQQ S8L-Elongated Bidet Toilet Seat, featuring a side control panel and a self-cleaning nozzle.
2. 중요한 안전 정보
Please read all safety warnings and instructions carefully to reduce the risk of fire, electric shock, or injury.
- 전기 요구 사항: This unit operates on 120 Volts and requires a 1300-watt power supply. Ensure the electrical outlet is a B-type US style with a ground plug and is GFCI (Ground Fault Circuit Interrupter) protected. Do not use extension cords.
- 상수도: Connect the bidet seat only to a potable cold water supply. Ensure all connections are secure to prevent leaks.
- 중량 제한: The maximum weight capacity for this bidet toilet seat is 280 pounds. Exceeding this limit may cause damage or injury.
- Lid Caution: The toilet seat lid is designed for soft closing and is not intended to support body weight. Avoid sitting or standing on the lid to prevent damage.
- 청소: Always unplug the unit before cleaning. Use only mild, non-abrasive cleaners.
- 아동 및 지적 장애가 있는 개인: 이 기기는 8세 이상의 어린이와 신체적, 감각적 또는 정신적 능력이 저하되었거나 경험과 지식이 부족한 사람이 기기를 안전하게 사용하는 방법에 대한 감독이나 지침을 받고 관련 위험을 이해한 경우 사용할 수 있습니다. 어린이는 기기를 가지고 놀지 않아야 합니다. 어린이는 감독 없이 청소 및 사용자 유지 관리를 해서는 안 됩니다.
3. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- XCQQ Bidet Toilet Seat
- 3-way Valve + DMT Pipe (Pre-Installed)
- 고정 플레이트
- Mounting Hardware (screws, rubber expansion nuts)
- 사용 설명서(본 문서)
4. 제품 특징
The XCQQ S8L-Elongated Bidet Toilet Seat offers a range of features designed for enhanced hygiene and comfort:
- 따뜻한 물 세척: Adjustable water temperature with 5 settings, ranging from room temperature to 102°F (39°C).
- 가열된 좌석: Provides warmth with 4 adjustable temperature levels, from room temperature up to 102°F (39°C).
- 온풍 건조기: Features an efficient air drying system with 5 adjustable temperature settings to reduce toilet paper usage.
- 부드럽게 닫히는 뚜껑: 슬래밍을 방지하고 소음을 줄입니다.
- 야간 조명: Integrated LED night light for visibility in low-light conditions, with a beep-off mode to avoid disturbance.
- 자체 세척 노즐: A stainless steel nozzle that performs self-cleaning before and after each use.
- LED 디스플레이: Real-time display of water temperature, seat temperature, and drying temperature.
- Memory Customized Settings: The unit retains your preferred settings for water pressure, water temperature, drying temperature, nozzle position, and heated toilet seat temperature level (settings may need to be re-memorized after a power outag이자형).
- Multiple Cleaning Styles: Includes Female Cleaning, Rear Cleaning, Oscillating Cleaning, and Self-Cleaning functions.
Image 4.1: Illustration of the heated toilet seat and warm air drying functions.
Image 4.2: Depiction of the soft-close lid mechanism and the integrated LED night light.
Image 4.3: Visual representation of the various cleaning modes, including female, rear, oscillating, and self-cleaning.
5. 설치 가이드
Before installation, ensure your toilet is an elongated shape and has an accessible electrical outlet. Refer to Image 5.1 to confirm your toilet size.
Image 5.1: Toilet size confirmation diagram for elongated and round models, highlighting the requirement for an electrical outlet.
설치 전 확인:
- 변기의 물 공급을 차단하세요.
- 변기를 내려서 탱크를 비우세요.
- 기존 변기 시트와 뚜껑을 제거하세요.
단계별 설치:
- Remove Fixing Plate: Hold down the buckle on the right side of the bidet unit and pull the fixing plate out from the bottom of the unit.
Image 5.2: Removing the fixing plate from the bidet seat.
- Secure Fixing Plate: Insert the rubber expansion nuts into the toilet holes. Use the metal adjustment sheets and screws to secure the fixing plate onto the toilet bowl.
Image 5.3: Securing the fixing plate to the toilet bowl.
- 비데 장치를 부착하세요: Push the bidet unit into the secured fixing plate while holding down the buckle until the plate slides completely into the bottom of the unit.
Image 5.4: Attaching the bidet unit to the fixing plate.
- 물 공급 연결: Insert the black rubber ring (optional) into the 3-way valve and screw it onto the inlet of the toilet tank. Connect the bidet's water hose to the 3-way valve.
Image 5.5: Connecting the bidet to the toilet's water supply.
- 물과 전력을 복구하세요: Open the main water supply valve. Wait 3-5 minutes for the bidet to fill with water. Then, plug the unit into a GFCI-protected electrical outlet.
Initial Power-On and Water Spray Check:
When the power is activated, the LED light will start to blink. The spray bar will automatically extend (without spraying water) and water will flow down the bar into the toilet. This is a system self-check. The blue light will stop blinking in approximately 1 minute automatically.
If the LED light blinks continuously for more than 5 minutes:
- Unplug the bidet.
- 물 밸브를 끄십시오.
- 3~5분 정도 기다리세요.
- Plug it back in and do not operate any functions. The blue light should stop blinking in 1 minute.
Image 5.6: Important attention notice for initial power-on and LED light behavior.
6. 운영
The XCQQ S8L-Elongated Bidet Toilet Seat is controlled via a side panel. Familiarize yourself with the buttons and their functions:
이미지 6.1: 상세 view of the side control panel, indicating various function buttons.
제어판 기능:
- 힘: 기기를 켜거나 끕니다.
- 중지: Stops any active washing or drying function.
- 스프레이: Initiates a general wash.
- 비데: Initiates a feminine wash.
- 터보 세척: Provides a stronger, more focused wash.
- 건조: 따뜻한 공기 건조기를 작동시킵니다.
- 자동: Starts an automatic washing and drying cycle with a single touch.
- 빛: LED 야간 조명을 켜거나 끕니다.
- Water Pressure / Drying Temp (HI/LO): Adjusts water pressure during wash or air temperature during drying.
- 노즐 위치(FR/BK): 노즐의 앞뒤 위치를 조절합니다.
- 수온: 물 온도를 조절합니다.
- 좌석 온도: 가열된 좌석의 온도를 조절합니다.
- 메모리: Saves current settings for personalized use.
Image 6.2: The LED display provides real-time information, and the 'Auto' button initiates a combined wash and dry cycle.
7. 유지관리
정기 청소:
- 노즐 청소: The stainless steel nozzle performs an automatic self-cleaning cycle before and after each use. For additional cleaning, a manual nozzle cleaning function may be available via the control panel (refer to specific button if present).
- 유닛 청소: Always unplug the bidet toilet seat from the electrical outlet before cleaning. Use a soft, damp cloth and a mild, non-abrasive household cleaner. Avoid harsh chemicals, abrasive pads, or strong solvents, as these can damage the surface.
- Seat Removal for Cleaning: The bidet seat can be unclipped from the fixing plate for thorough cleaning of the toilet bowl and the underside of the seat. Refer to the installation steps in reverse to remove and reattach the seat.
- 외부: Wipe down the exterior surfaces, including the control panel, with a soft, damp 옷감.
장기 보관:
If the unit will not be used for an extended period, especially in cold climates, it is recommended to drain the water from the unit to prevent freezing damage. Consult a qualified plumber if you are unsure how to perform this task.
8. 문제 해결
이 섹션에서는 발생할 수 있는 일반적인 문제에 대해 설명합니다. 문제가 지속될 경우 고객 지원팀에 문의하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원이 들어오지 않습니다 / 장치가 켜지지 않습니다 | Unit unplugged; GFCI tripped; Power outage. | Ensure the unit is securely plugged into a GFCI outlet. Reset the GFCI if tripped. Check household power supply. |
| LED light blinks continuously for more than 5 minutes after power-on | Initial water fill incomplete or system error. | Unplug the bidet, turn off the water valve, wait 3-5 minutes, then plug it back in without operating functions. The light should stop blinking within 1 minute. Ensure water supply is fully open. |
| 물 분사가 안 됨 / 수압이 약함 | Water supply valve closed; Nozzle clogged; Water pressure setting too low. | Ensure the toilet's water supply valve is fully open. Check for any kinks in the water hose. Clean the nozzle if visibly clogged. Adjust water pressure settings on the control panel. |
| Heated seat not warm / Water not warm | Temperature settings too low; Power save mode active. | Adjust seat and water temperature settings on the control panel. Disable power save mode if applicable. |
| Air dryer not working / Air too hot | Drying function not activated; Temperature setting incorrect. | Activate the drying function. Adjust the drying temperature settings on the control panel. |
| Lid closes too quickly / Does not stay open | Improper installation or alignment. | Recheck the installation of the fixing plate and bidet unit to ensure proper alignment and secure attachment. |
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | XCQQ |
| 모델 번호 | XCQQ-S8L |
| 스타일 | S8L-Elongated (Panel Control) |
| 색상 | 하얀색 |
| 재료 | 아크릴로니트릴 부타디엔 스티렌(ABS) |
| 모양 | 타원형 |
| 제품 치수 | 20.1 x 17.5 x 5.5 인치 |
| 품목 무게 | 12.27파운드 |
| 전원 | AC |
| 권tage | 120 볼트 |
| 왓tage | 1300 와트 |
| 온도 범위 (물/좌석) | 59 - 95 Degrees Fahrenheit (Adjustable up to 102°F / 39°C) |
| 최대 중량 용량 | 280 파운드 |
| 플러그 형식 | B - 접지 플러그가 있는 미국식 |
10. 보증 및 지원
보증 정보: Please refer to the product packaging or the official XCQQ web자세한 보증 약관은 해당 사이트를 참조하십시오. 보증 청구를 위해 구매 증빙 자료를 보관하십시오.
고객 지원: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact XCQQ customer support through the retailer where the product was purchased or visit the official XCQQ brand web대지.
