1. 서론
The Thermaltake Smart BM3 650W 80Plus Bronze certified semi-modular power supply is designed to meet ATX 3.1 standards and includes one PCIe Gen 5 (12V-2x6) connector, supporting modern graphics cards. This power supply features a 120mm Fluid Dynamic Bearing (FDB) fan for efficient airflow and a Smart Zero Fan function to minimize noise under low loads. High-quality Japanese main electrolytic capacitors enhance durability and ensure stable, reliable power delivery.
2. 주요 특징
- 80Plus Bronze Certified: Ensures up to 85% efficiency at 115Vac input.
- ATX 3.1 & PCIe Gen 5 Ready: Fully compatible with Intel ATX 3.1 standards and includes a 12V-2x6 connector for PCIe Gen 5 graphics cards.
- High Quality Japanese Capacitors: Features 105°C/221°F Japanese main electrolytic capacitors for improved durability and reliability.
- 120mm FDB Fan with Smart Zero Fan: Provides excellent airflow. The fan remains off until the load exceeds 20% of the power supply's capacity, ensuring quiet operation.
- Built-in Industrial Grade Protection: Includes OCP (Over Current Protection), OVP (Over Voltage 보호), UVP(볼륨 아래)tage Protection), OPP (Over Power Protection), OTP (Over Temperature Protection), and SCP (Short Circuit Protection).
- Semi-Modular Flat Cable Design: Soft flat black cables with sleeve cabling for easy installation and optimal cable management.
3. 패키지 내용
패키지를 열 때 다음 품목이 모두 들어 있는지 확인하세요.
- 써멀테이크 스마트 BM3 650W 파워 서플라이 유닛
- AC 전원 코드
- Modular Cable Set (Main Power, ATX 12V, PCIe, SATA, Peripheral)
- 장착 나사
- 케이블 타이
- 사용자 설명서
4. 설치 가이드
Follow these steps to properly install your Thermaltake Smart BM3 650W Power Supply into your computer system.
4.1. 시스템을 준비하세요
- 안전이 최우선입니다. Always disconnect the AC power cord from the wall outlet before installing or removing any components.
- PC 케이스 열기: 내부 구성 요소에 접근하려면 컴퓨터 케이스의 측면 패널을 제거하세요.
- 기존 파워서플라이를 제거하십시오(해당되는 경우): 기존 전원 공급 장치의 모든 케이블을 분리하고 케이스에서 전원 공급 장치를 제거하십시오.
4.2. 전원 공급 장치를 설치하십시오.
- Mount PSU: Carefully slide the new Thermaltake Smart BM3 650W Power Supply into the designated PSU bay in your PC case. Ensure the fan is facing the correct direction (usually downwards for bottom-mounted PSUs, or as per case design for optimal airflow).
- 안전한 전원 공급 장치: Use the provided mounting screws to secure the power supply to the PC case.
- 모듈형 케이블 연결: Attach only the necessary modular cables to the power supply unit. This semi-modular design allows for better cable management and airflow.
- 마더보드에 연결:
- Connect the 24-pin Main Power connector to your motherboard.
- Connect the 4+4-pin ATX 12V CPU power connector(s) to your motherboard.
- Connect to Graphics Card (GPU):
- For modern GPUs, connect the 12V-2x6 (PCIe Gen 5) connector directly to your graphics card.
- For other GPUs, connect the appropriate 6+2-pin PCIe connectors.
- Connect to Storage Devices: SATA 전원 케이블을 SSD, HDD 및 기타 SATA 전원 공급 장치에 연결하십시오.
- 주변기기 연결: Connect peripheral 4-pin Molex connectors to any other devices requiring them (e.g., older fans, fan controllers).
- 케이블 관리 : Route cables neatly behind the motherboard tray or in designated channels to improve airflow and aesthetics. Use cable ties if necessary.
Figure 4.2.1: Thermaltake Smart BM3 650W Power Supply with its semi-modular cables connected.
Figure 4.2.2: Diagram illustrating the modular cable connections on the power supply unit.
Figure 4.2.3: Close-up of the PCIe Gen 5.0 (12VHPWR) connector for modern graphics cards.
4.3. 최종 단계
- PC 케이스 닫기: 컴퓨터 케이스의 측면 패널을 다시 부착하세요.
- AC 전원 연결: Plug the AC power cord into the power supply unit and then into a wall outlet.
- 전원 켜기: 파워서플라이 뒷면에 있는 전원 스위치를 'ON' 위치로 돌리세요.
5. 사용 설명서
5.1. Smart Zero Fan Function
The Smart Zero Fan function is designed to minimize noise. When enabled, the 120mm FDB fan will not spin until the power supply load exceeds 20% of its maximum capacity. This ensures silent operation during low-load tasks.
- 활성화/비활성화하려면: Locate the "Smart Zero Fan" switch on the back of the power supply unit.
- ON 위치: Fan will only spin when load exceeds 20%.
- 꺼짐 위치: Fan will operate continuously regardless of load.
Figure 5.1.1: Location of the Smart Zero Fan switch on the power supply.
6. 유지관리
적절한 유지관리는 전원 공급 장치의 수명과 최적의 성능을 보장합니다.
- 먼지 청소: Regularly clean the fan and ventilation grilles of the power supply to prevent dust buildup, which can impede airflow and lead to overheating. Use compressed air for best results.
- 케이블 검사: Periodically check all connected cables for any signs of wear, damage, or loose connections.
- 환경 조건: Ensure the power supply operates within recommended temperature and humidity ranges (Operating Temperature: 5°C to +40°C; Operating Humidity: 20% to 85%, non-condensing).
7. 문제 해결
전원 공급 장치에 문제가 발생하면 다음의 일반적인 문제 해결 단계를 참조하십시오.
- 전원 없음:
- AC 전원 코드가 전원 공급 장치와 벽면 콘센트에 제대로 꽂혀 있는지 확인하십시오.
- 전원 공급 장치의 주 전원 스위치가 '켜짐' 위치에 있는지 확인하십시오.
- Check all internal power connections (24-pin, ATX 12V, PCIe) to ensure they are firmly seated.
- 다른 장치로 벽면 콘센트를 테스트하여 전원이 들어오는지 확인하세요.
- 시스템 불안정/무작위 종료:
- This could indicate insufficient wattage or a faulty component. Ensure your total system power draw does not exceed the PSU's 650W capacity.
- Check for overheating. Ensure proper airflow within the case and that the PSU fan is operating (if Smart Zero Fan is off or under load).
- 모든 모듈형 케이블이 파워서플라이 및 구성 요소에 올바르게 연결되었는지 확인하십시오.
- Fan Not Spinning (Smart Zero Fan ON):
- 시스템 부하가 20% 미만일 때는 정상적인 현상입니다. 부하가 증가하면 팬이 자동으로 작동합니다.
- If the system is under heavy load and the fan is still not spinning, try switching the Smart Zero Fan to 'OFF' to force it on. If it still doesn't spin, contact support.
If issues persist after following these steps, please contact Thermaltake customer support for further assistance.
8. 사양
| 모델 번호 | PS-SPD-0650MNFABU-3 |
| 와트 | 650와트 |
| 능률 | 80 PLUS® Bronze at 115Vac input |
| 폼 팩터 | 에이티엑스 |
| 치수(길이x너비x높이) | 150mm(W) x 86mm(H) x 140mm(D) (5.9 x 3.4 x 5.5 inches) |
| 냉각 시스템 | 스마트 제로 팬 기능이 탑재된 12cm FDB 선풍기 |
| 메인 커패시터 | High quality Japanese 105°C/221°F electrolytic capacitor |
| PFC(역률개선) | 활성 PFC |
| 입력 Voltage | 100-240V~ |
| 입력 주파수 범위 | 50Hz/60Hz |
| 평균 무사고 | 최소 100,000시간 |
| 안전 승인 | FCC/ICES/CB/cTUVus/S-마크 |
| PCI-E 6+2PIN Connectors | 4 |
| PCI-E 12+4PIN (12V-2x6) Connector | 1(300W) |
Figure 8.1: Cable connector types, quantities, and lengths.
9. 보호 기능
The Thermaltake Smart BM3 650W Power Supply is equipped with multiple industrial-grade protection circuits to safeguard your system components:
- OCP(과전류 보호): 출력 레일의 과전류로부터 보호합니다.
- OVP(오버 볼륨tag전자 보호): Shuts down the PSU if voltage on any rail exceeds a safe level.
- UVP(볼륨 아래tag전자 보호): Shuts down the PSU if voltage on any rail drops below a safe level.
- OPP(과전력 보호): Protects the PSU from operating beyond its maximum wattage.
- OTP(과열 보호): 내부 온도가 너무 높아지면 PSU를 끕니다.
- SCP(단락 보호): Prevents damage to the PSU and components in case of a short circuit.
그림 9.1: 이상view of built-in industrial grade protection features.
10. 보증 및 지원
The Thermaltake Smart BM3 series power supplies come with an ample 5년 보증. This warranty covers defects in materials and workmanship under normal use. For detailed warranty terms and conditions, please refer to the warranty card included in your product packaging or visit the official Thermaltake web대지.
For technical support, troubleshooting assistance, or warranty claims, please contact Thermaltake customer service through their official support channels.
