Ving 24인치 자동 DTF 분말 셰이커 및 건조기 사용 설명서

1. 서론

This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of the Ving 24-inch Automatic DTF Powder Shaker and Dryer. This unit is designed to automate the direct-to-film (DTF) transfer printing process by evenly spreading and melting adhesive powder onto printed images, streamlining production for T-shirt and other textile applications.

기기를 올바르게 사용하고 손상이나 부상을 예방하기 위해 작동 전에 이 설명서를 자세히 읽어 주십시오. 나중에 참조할 수 있도록 이 설명서를 보관하십시오.

2. 안전 정보

항상 다음 안전 예방 조치를 준수하십시오.

• 기계가 안정적이고 평평한 표면에 놓여 있는지 확인하십시오.
• 올바른 볼륨으로 접지된 전원 콘센트에 기계를 연결하세요.tage.
• 작동 중에는 움직이는 부분에 손이나 헐렁한 옷을 가까이 두지 마십시오.
• 기계를 d에서 작동하지 마십시오.amp 또는 습한 환경.
• Turn off and unplug the machine before performing any maintenance or cleaning.
• Use appropriate personal protective equipment (PPE) such as gloves and masks when handling DTF powder.
• Ensure adequate ventilation in the work area to dissipate fumes from the drying process.

3. 제품 오버view

The Ving 24-inch Automatic DTF Powder Shaker and Dryer integrates several functions to automate the DTF transfer process:

• Vacuum Absorption Conveying Platform: Secures the printing material to prevent bulging and ensure consistent powder application.
• Automatic Powder Dispenser: Evenly spreads adhesive powder onto the printed film.
• Paddle System: Removes excess powder from the film.
• Infrared Drying and Heating Tunnel: Features 4 bulbs for efficient melting and curing of the adhesive powder, enhancing color reproduction.
• Warming Inlet Platform: Prepares the film for optimal powder adhesion.
• Touch Screen Display Controller: Provides a user-friendly interface for machine control.
• Roll-up Mechanism: Collects the finished film.

그림 3.1: 전면 view of the Ving 24-inch Automatic DTF Powder Shaker and Dryer, showing the overall machine structure.

그림 3.2: 측면 view of the machine, highlighting the integrated touch screen control panel.

Figure 3.3: The DTF Shaker and Dryer integrated into a typical printing workshop environment.

4. 설정

1. 짐 풀기: Carefully remove the machine from its packaging. Inspect for any shipping damage. Report any damage to the carrier immediately.
2. 놓기: Position the machine on a sturdy, level surface capable of supporting its weight. Ensure there is sufficient space around the machine for operation, maintenance, and ventilation.
3. 전원 연결: Connect the power cord to the machine and then to a grounded electrical outlet that meets the specified voltag요구사항
4. Powder Loading: Open the powder dispenser compartment and carefully pour the DTF adhesive powder into the designated reservoir. Ensure the powder is dry and free of clumps.
5. 필름 로딩: Load the DTF film roll onto the input spindle, ensuring it feeds smoothly onto the vacuum absorption conveying platform.
6. 초기 전원 켜기: Turn on the main power switch. The touch screen display should illuminate.

5. 사용 설명서

Follow these steps for the DTF transfer printing process using the Ving Automatic DTF Powder Shaker and Dryer:

1. 디자인 준비: Create or select your design using appropriate graphic software.
2. Print onto DTF Film: Print your design onto the DTF film using a compatible DTF printer. Ensure the print is wet when it enters the shaker unit.
3. Automatic Powder Shaking: As the wet printed film enters the shaker unit, the automatic powder dispenser will apply an even layer of adhesive powder. The paddle system will then remove excess powder.
4. Baking/Curing: The film with the applied powder will then pass through the infrared drying and heating tunnel. The heat will melt and cure the adhesive powder onto the ink.
5. Heat Press Application: Once the film exits the dryer and cools, it is ready for heat pressing onto your desired garment or substrate.
6. 마무리 손질: Peel the transfer film from the garment after heat pressing according to the film manufacturer's instructions.

Figure 5.1: Visual representation of the DTF printing workflow, from design creation to final product.

그림 5.2: 내부 view of the drying tunnel, illustrating the infrared heating elements and the conveyor belt system.

그림 5.3: View of the powder collection and distribution system within the shaker unit.

6. 유지관리

Regular maintenance ensures optimal performance and longevity of your DTF Powder Shaker and Dryer.

• 매일 청소: After each use, clean any residual powder from the conveying platform, powder dispenser, and paddle system. Use a soft, dry cloth or brush.
• Powder Management: DTF powder shakers typically do not have an automatic powder recycling function. Regularly inspect and remove any excess powder to prevent moisture absorption, which can lead to clumping and poor application. Store unused powder in a dry, sealed container.
• Conveyor Belt Inspection: Periodically check the conveyor belt for wear, tears, or misalignment. Clean the belt to remove any adhesive residue.
• 발열체 점검: Ensure the infrared heating bulbs are clean and functioning correctly. Replace any burnt-out bulbs as needed.
• 일반 검사: Regularly inspect all electrical connections and moving parts for any signs of wear or damage.

중요 참고 사항:

This DTF powder shaker model does not feature an automatic powder recycling function. Manual removal and proper storage of excess powder are essential to prevent moisture absorption and maintain powder quality.

7. 문제 해결

8. 사양

• 모델: B0CFQNQ5FN
• 상표: 빙
• 기계 유형: Automatic DTF Powder Shaker and Dryer
• Maximum Film Width: Approximately 24 inches (based on product title)
• 건조 방법: Infrared Heating (4 bulbs)
• 제어 인터페이스: 터치 스크린 디스플레이
• Conveying System: Vacuum Absorption Platform
• Applicable Mediums: Nylon, Chemical Fiber, Cotton, Leather, Swimsuit, Diving Suit, PVC, EVA, etc.
• 제조업체: 로그인-중국
• 첫 이용 가능 날짜: 15년 2023월 XNUMX일

그림 8.1: 예amples of various materials and finished products that can be customized using DTF transfer printing, including canvas bags, hats, pillows, T-shirts, hoodies, pants, socks, and masks.

9. 보증 및 지원

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your vendor. Please have your model number (B0CFQNQ5FN) and date of purchase ready when contacting support.