소개
This manual provides essential instructions for the safe and effective operation of your ESKY 150 EC Micro RC Helicopter. The 150 EC is a third-generation micro remote-controlled helicopter designed for ease of operation. It features a 6-axis gyroscope for stable flight, atmospheric pressure and altitude hold capabilities, hovering, and a controllable flight path. It also includes a one-button shutdown function for emergency situations.
상자 안에 무엇이 들어있나요?
Carefully unpack all components and ensure all items listed below are present. If any items are missing or damaged, please contact customer support.
- 1 x ESKY 150 EC 헬리콥터
- 1 x MINI 6X 6-Channel 2.4GHz Transmitter (Remote Control)
- 1 x 1S 3.7V 150mAh 20C Li-Po Battery (for helicopter)
- 2 x Main Blades (spare)
- 1 x Tail Blade (spare)
- 1 x USB 충전기
- 스크류 드라이버 2개
- 1 x 사용자 매뉴얼(이 문서)

Image: All components included in the ESKY 150 EC package.
제품 끝view
헬리콥터 부품

이미지: 측면 view of the ESKY 150 EC helicopter.
The ESKY 150 EC helicopter features a durable frame, main rotor blades, a tail rotor, landing skids, and a removable canopy. The main rotor provides lift and control, while the tail rotor controls yaw (left/right rotation).
리모콘(송신기)
The MINI 6X 6-Channel 2.4GHz transmitter is used to control the helicopter. Familiarize yourself with its various controls:

Image: Labeled diagram of the MINI 6X Remote Control.
- 모드 스위치: Changes flight modes (e.g., beginner/advanced).
- 전원 LED 표시기: 전원 상태를 보여줍니다.
- 스로틀 컷 스위치: Immediately cuts power to the motor.
- Rudder (Left/Right): Controls the helicopter's yaw.
- 스로틀(위/아래): 주 로터의 속도와 고도를 제어합니다.
- Aileron (Left/Right): Controls the helicopter's roll (side-to-side movement).
- Elevator (Up/Down): Controls the helicopter's pitch (forward/backward movement).
- Trim Controls (Throttle, Rudder, Aileron, Elevator): Fine-tune controls to correct unwanted drift.
- 전원 스위치: Turns the remote control ON/OFF (hold down for ON/OFF).
설정
1. 헬리콥터 배터리 충전
The helicopter uses a 1S 3.7V 150mAh Li-Po battery. Always use the provided USB charger.
- USB 충전기를 USB 전원(예: 컴퓨터 USB 포트, USB 벽면 어댑터)에 연결하세요.
- Connect the helicopter battery to the USB charger. Ensure the polarity is correct.
- The indicator light on the charger will show the charging status (refer to charger instructions for specific light patterns).
- Once charging is complete, disconnect the battery from the charger. Do not overcharge.

Image: Connecting the Li-Po battery to the USB charger.
2. Installing the Helicopter Battery
Ensure the helicopter is powered off before installing the battery.
- Gently remove the helicopter's canopy to access the battery compartment.
- Insert the charged Li-Po battery into the compartment.
- Connect the battery plug to the helicopter's power port.
- Carefully reattach the canopy.

Image: Helicopter with canopy removed, revealing the battery compartment.

Image: Battery inserted into the helicopter.
3. 전원 켜기 및 바인딩
The helicopter and remote control must be bound (paired) before flight.
- 헬리콥터를 평평하고 수평인 표면에 놓으세요.
- Ensure the remote control's throttle stick is in the lowest position.
- 헬리콥터의 전원 스위치를 켜세요. 헬리콥터의 표시등이 깜빡일 것입니다.
- Press and hold the Power Switch on the remote control until it turns on. The remote control's indicator light will flash.
- Wait for a few seconds. The indicator lights on both the helicopter and remote control should become solid, indicating a successful binding.
- If binding fails, turn off both devices and repeat the process.
작동 지침
Always operate the helicopter in an open, safe area, away from people, animals, and obstacles. Ensure you have sufficient space for flight.
기본 비행 제어
- 스로틀(왼쪽 스틱 위/아래): Increases or decreases the main rotor speed, controlling ascent and descent.
- 방향타 (왼쪽 조종간 왼쪽/오른쪽): Controls the helicopter's rotation around its vertical axis (yaw).
- 엘리베이터 (오른쪽 스틱을 위/아래로 조작): Controls forward and backward movement (pitch).
- 에일러론(오른쪽 스틱 좌/우 조작): 좌우 움직임(롤)을 제어합니다.
이륙 및 착륙
- 이륙하다: Slowly push the throttle stick up. The helicopter will gain altitude. Maintain a steady throttle to achieve a stable hover.
- 착륙: Slowly pull the throttle stick down. The helicopter will descend. Reduce throttle completely upon landing.
Altitude Hold and Hover
The 150 EC is equipped with a 6-axis gyroscope and atmospheric pressure sensor for stable flight and altitude hold. Once the helicopter reaches a desired altitude, release the throttle stick to its center position. The helicopter will attempt to maintain its current height.
Flight Modes (Hi/Lo)
The remote control features a Mode Switch. It is recommended to use the "Hi" mode for more stable and responsive flight. The "Lo" mode may exhibit a slight delay in controller response.
원터치 종료
In an emergency or if the helicopter is out of control, use the Throttle Cut Switch to immediately stop the motors. This function can also be used for a quick, controlled shutdown after landing.
유지
청소
Wipe the helicopter and remote control with a soft, dry cloth after each use. Avoid using water or chemical cleaners, as they can damage electronic components.
블레이드 교체
If main or tail blades become damaged, replace them with the provided spares using the included screwdriver. Ensure blades are securely fastened but not overtightened.

이미지: 상세 views of helicopter components, including rotor attachment points.
배터리 관리
- 항상 원래 충전기를 사용하십시오.
- 배터리를 과충전하거나 과방전하지 마십시오.
- 배터리는 직사광선과 열을 피해 서늘하고 건조한 곳에 보관하세요.
- 배터리가 부풀어 오르거나 손상된 흔적이 보이면 즉시 사용을 중단하고 적절하게 폐기하십시오.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 헬리콥터가 원격 조종에 반응하지 않습니다. | Not bound, low battery (helicopter or remote), power off. | Ensure both devices are powered on. Re-bind the helicopter and remote control. Charge helicopter battery. Replace remote control batteries. |
| 헬리콥터가 제자리 비행 중 표류합니다. | Uneven trim settings, slight wind, unbalanced blades. | Adjust trim controls on the remote control. Operate in a calm environment. Check blades for damage and replace if necessary. |
| 헬리콥터가 이륙하지 않습니다. | Low helicopter battery, damaged blades, throttle not advanced enough. | Charge helicopter battery. Check and replace damaged blades. Slowly increase throttle. |
| 짧은 비행 시간. | 배터리가 완전히 충전되지 않았거나 배터리가 노후되었습니다. | 배터리가 완전히 충전되었는지 확인하십시오. 배터리가 오래되었거나 손상된 경우 교체를 고려하십시오. |
명세서
- 모델 번호: 150에이씨
- 제조업체: 에스키
- 제어 시스템: 6 축 자이로 스코프
- 특징: Height Hold, Hover, One-button Shutdown
- 헬리콥터 배터리: 1S 3.7V 150mAh Li-Po (included)
- 원격 제어: MINI 6X 6-Channel 2.4GHz Transmitter
- 추천 연령: 14세 이상
- 품목 무게: 포장을 포함하여 약 1.05파운드입니다.
- 패키지 크기: 8.3 x 7.1 x 3.8 인치

Image: ESKY 150 EC Helicopter dimensions.
안전 지침
Please read and adhere to these safety guidelines to prevent injury or damage.
- Always operate the helicopter in an open area, away from people, pets, and obstacles.
- Do not fly near power lines, roads, or water bodies.
- Keep fingers and loose clothing away from rotating blades.
- Never fly in strong winds or adverse weather conditions.
- 14세 미만 사용자는 성인의 감독이 필요합니다.
- Do not attempt to modify the helicopter or its components.
- 사용하지 않을 때는 헬리콥터와 원격 조종 장치의 전원을 끄세요.
보증 및 지원
Information regarding product warranty and customer support contact details is not available in the provided product data. Please refer to the product packaging or the seller's web구체적인 보증 조건과 지원 옵션은 해당 사이트에서 확인하세요.
공식 제품 영상
판매자 측에서 제공한 공식 제품 영상이 제품 정보에 포함되어 있지 않습니다.





