1. 서론
Thank you for choosing the Havit PA304 Projector Ceiling and Wall Mount. This mount is designed to securely hold your projector, offering flexible positioning with 360-degree rotation and adjustable height. Please read this manual carefully before installation and use to ensure proper setup and safe operation.
그림 1: Havit PA304 Projector Mount. This image displays the main components of the Havit PA304 mount, including the mounting plate, adjustable arm, and projector attachment head.
2. 안전 정보
- Ensure the mounting surface (ceiling or wall) can support the combined weight of the mount and your projector. The maximum load capacity for this mount is 3 kg.
- 최대 중량인 3kg을 초과하지 마십시오.
- Use appropriate tools and follow all installation steps carefully to prevent injury or damage to the product or property.
- 설치 과정 중 확실하지 않은 부분이 있으면 자격을 갖춘 전문가에게 문의하십시오.
- 작은 부품과 포장재는 어린이의 손이 닿지 않는 곳에 보관하세요.
- 모든 나사와 연결부를 정기적으로 점검하여 안전하게 고정되어 있는지 확인하세요.
3. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Havit PA304 Projector Mount Assembly
- Screw Mounting Kit (includes screws and wall anchors)
메모: Projector and installation tools (drill, screwdriver, pencil, measuring tape) are not included.
4. 설치 지침
The Havit PA304 mount can be installed on either a ceiling or a wall. Follow the steps below for your desired mounting location.
4.1. 필요한 도구 (포함되지 않음)
- 송곳
- 드라이버(십자 드라이버 권장)
- 연필
- 줄자
4.2. Mounting the Bracket to the Ceiling or Wall
- 위치 선택: Choose a suitable location on your ceiling or wall that is structurally sound and can support the weight. Ensure there are no electrical wires or pipes behind the drilling area.
- 드릴 구멍 표시: Hold the mounting plate of the Havit PA304 mount against the desired surface. Use a pencil to mark the positions for the drill holes.
- 드릴 구멍: Using an appropriate drill bit for your wall/ceiling material, drill pilot holes at the marked positions. Insert the wall anchors (if required for your surface type) into the drilled holes.
- 안전한 장착 플레이트: Align the mounting plate with the drilled holes and secure it firmly using the provided screws and a screwdriver. Ensure the plate is level and tightly fastened.
Image for this step (e.g., "PA304_MountingPlate_Installation.jpg") is not available in the provided data.
4.3. 프로젝터를 마운트에 부착하기
- Identify Projector Mounting Point: Locate the universal mounting screw hole on the bottom of your projector.
- Attach Projector: Carefully align the projector's mounting hole with the screw on the projector attachment head of the Havit PA304 mount. Screw the projector onto the mount until it is secure. Do not overtighten.
- 안정성 확인: Gently test the projector's stability on the mount. It should feel firm and not wobble.
Image for this step (e.g., "PA304_Projector_Attachment.jpg") is not available in the provided data.
5. 작동 및 조정
The Havit PA304 mount offers flexibility for optimal projector positioning.
- 360도 회전: The projector attachment head can rotate 360 degrees. Loosen the adjustment knob/screw on the head, position your projector to the desired angle, and then tighten the knob/screw to secure it.
- 높이 조정: The mount allows for height adjustment between 27.5 cm and 39 cm. Loosen the height adjustment mechanism (usually a collar or screw on the main pole), extend or retract the pole to the desired height, and then firmly tighten the mechanism to lock it in place.
- 각도 조정: Some projectors may require slight tilting. The mount's head allows for minor tilt adjustments. Loosen the relevant screw, adjust the projector's vertical angle, and then retighten.
Image illustrating adjustment points (e.g., "PA304_Adjustment_Points.jpg") is not available in the provided data.
6. 유지관리
- 청소: 부드럽고 마른 천으로 거치대를 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오. 마감재가 손상될 수 있습니다.
- 정기 점검: Periodically inspect all screws and connections to ensure they are tight and secure. Over time, vibrations or adjustments can cause screws to loosen.
- 중량 제한: Always ensure that the total weight of your projector does not exceed the 3 kg maximum load capacity.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 마운트가 불안정하거나 흔들리는 느낌이 듭니다. | Screws are loose; mounting surface is not strong enough; projector weight exceeds limit. | Tighten all mounting screws. Ensure the mounting surface is solid. Verify projector weight is within 3 kg. |
| Cannot adjust height or rotation. | Adjustment mechanisms are too tight. | Loosen the relevant adjustment knob/screw before attempting to adjust. Retighten after positioning. |
| Projector does not fit the mount. | Projector lacks a universal mounting screw hole or has an unusual design. | Ensure your projector has a standard 1/4-inch screw hole for mounting. This mount is designed for projectors with a single mounting point. |
8. 사양
| 모델명 | Havit PA304 |
| 모델 번호 | PA304 |
| 상표 | Havit |
| 재료 | 금속 |
| 마운트 유형 | 천장 마운트, 벽 마운트 |
| 최대 중량 용량 | 3kg(6.6파운드) |
| 높이 조절 범위 | 27.5cm - 39cm(10.8인치 - 15.3인치) |
| 회전 | 360도 |
| 포함된 구성 요소 | Mount assembly, screw mounting kit |
9. 보증 및 지원
The Havit PA304 Projector Mount comes with a 2년 보증 from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
For technical support, warranty claims, or further inquiries, please contact your local Havit dealer or visit the official Havit website for contact information. Please retain your proof of purchase for warranty service.
