Hager Witty Start Single-Phase Adjustable EV Charging Point User Manual

1. 제품 오버view

The Hager Witty Start XEV1K07T2 is a single-phase adjustable electric vehicle charging point designed for easy installation in private parking areas, both indoors and outdoors. This unit offers a charging capacity ranging from 2.6 kW to 7.4 kW, optimized for cost-effectiveness and high performance.

It is compatible with all electric vehicle brands on the market, utilizing Mode 3 charging with a Type 2 socket. The Witty Start charging point features a compact, robust design (IK10) and is suitable for indoor or outdoor use (IP55). It can be wall-mounted or installed on a stand and includes integrated 6mA DC protection.

그림 1: Hager Witty Start EV Charging Point with its protective covers open, revealing the Type 2 charging socket and internal components. This view highlights the robust construction and accessibility for connection.

2. 안전 정보

설치 및 작동 전에 모든 안전 지침을 주의 깊게 읽으십시오. 지침을 따르지 않으면 감전, 화재 또는 심각한 부상이 발생할 수 있습니다.

• 설치는 모든 지역 및 국가 전기 규정에 따라 자격을 갖춘 전기 기술자가 수행해야 합니다.
• Do not attempt to open, disassemble, or modify the charging point.
• 설치 또는 유지 보수 작업을 하기 전에 반드시 전원 공급 장치를 차단하십시오.
• Do not use the charging point if it is damaged, wet, or shows any signs of malfunction.
• Keep children and unauthorized personnel away from the charging point during operation.
• The charging point is designed for electric vehicle charging only. Do not use it for other purposes.

3. 설치

The Hager Witty Start charging point is designed for wall mounting. Ensure the chosen location is suitable for electrical installation and provides adequate space for operation and maintenance.

3.1 사이트 선택

• Choose a location that is easily accessible for vehicle charging.
• Ensure the surface is flat and strong enough to support the weight of the charging point.
• The unit is rated IP55 for outdoor use, but protection from direct heavy rain or sunlight can extend its lifespan.
• Maintain adequate clearance around the unit for ventilation and access.

3.2 장치 장착

1. 제공된 템플릿(해당되는 경우)을 사용하거나 장치의 장착 구멍 크기를 측정하여 벽에 드릴 구멍을 표시하십시오.
2. Drill holes and insert appropriate wall plugs for the mounting screws.
3. Securely attach the charging point to the wall using suitable screws.

3.3 전기 연결

• 경고: 전기 연결 작업을 하기 전에 반드시 주 전원 공급 장치가 꺼져 있는지 확인하십시오.
• Connect the single-phase power supply (230V, 50/60Hz) to the designated terminals inside the charging point.
• 적절한 접지가 이루어졌는지 확인하십시오.
• The unit includes integrated 6mA DC protection. Verify all connections are tight and secure.
• Close and secure all covers after electrical connections are complete.

4. 운영

The Hager Witty Start charging point is designed for straightforward operation. It supports Mode 3 charging via a Type 2 socket.

그림 2: Hager Witty Start EV Charging Point in its closed state, showing the minimalist design and the "start" and "stop" indicators on the front panel.

4.1 충전 시작

1. Ensure your electric vehicle is parked safely and the charging cable can reach the charging point.
2. Open the protective cover of the Type 2 socket on the charging point.
3. Connect the Type 2 charging cable to the charging point's socket.
4. Connect the other end of the charging cable to your electric vehicle's charging port.
5. The charging process should initiate automatically or by pressing the 'Start' button/indicator on the unit (refer to the visual indicators on the device).
6. Monitor the status indicators on the charging point and your vehicle to confirm charging is active.

4.2 기소 중지

1. To stop charging, press the 'Stop' button/indicator on the charging point (refer to the visual indicators on the device).
2. 먼저 전기차에서 충전 케이블을 분리하세요.
3. Then, disconnect the charging cable from the charging point.
4. Close the protective cover of the Type 2 socket.

4.3 Charge Management

The unit supports basic charge management. For advanced features or integration with smart home systems, consult the Hager documentation or a qualified installer.

5. 유지관리

Regular maintenance ensures the longevity and safe operation of your Hager Witty Start charging point.

• 청소: Clean the exterior of the charging point with a soft, damp cloth. Do not use abrasive cleaners, solvents, or high-pressure water jets.
• 점검: Periodically inspect the charging point for any signs of damage, wear, or loose connections. Check the charging cable for fraying or damage.
• 전문가 확인: It is recommended to have the charging point inspected by a qualified electrician at least once a year.
• 전원 차단: Always disconnect the power supply to the unit before performing any cleaning or inspection that requires opening covers.

6. 문제 해결

If you encounter issues with your charging point, refer to the following common troubleshooting steps:

• 전원 없음: Check the circuit breaker in your electrical panel. Ensure the charging point is properly connected to the main power supply.
• 충전이 시작되지 않음:
  • Ensure the charging cable is securely connected to both the charging point and the vehicle.
  • Verify that your vehicle's charging port is clean and free of debris.
  • Check the vehicle's dashboard for any error messages.
  • Try restarting the charging process by disconnecting and reconnecting the cable.
• 느린 충전: Ensure the charging point is set to the desired power output (if adjustable). Check for any limitations from your vehicle or electrical installation.
• 오류 표시기: If the charging point displays an error light or code, consult the full technical documentation or contact customer support.

If the problem persists after attempting these steps, contact a qualified electrician or Hager customer support.

7. 기술 사양

8. 보증 및 지원

For specific warranty information, please refer to the documentation provided with your purchase or visit the official Hager web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

For technical support, installation assistance, or service requests, please contact Hager customer service or your authorized dealer. Ensure you have your product model number (XEV1K07T2) and serial number ready when contacting support.

제조업체: 헤이거

모델 참조: XEV1K07T2