Veepeak L14-30R

비피크 30 Amp Flanged Outlet NEMA L14-30R Instruction Manual

Model: L14-30R

소개

This manual provides essential information for the safe and proper installation, operation, and maintenance of your Veepeak 30 Amp Flanged Outlet NEMA L14-30R Locking Receptacle. Please read all instructions carefully before installation and use. Retain this manual for future reference.

안전 정보

경고: Electrical shock hazard. Improper installation or use can result in serious injury or death. Always follow local electrical codes and consult a qualified electrician if you are unsure about any part of the installation process.

  • 이 장치를 설치하거나 수리하기 전에 항상 회로 차단기 또는 퓨즈 박스에서 전원을 차단하십시오.
  • Ensure all wiring connections are secure and correct according to the wiring diagram and local codes.
  • 기기의 정격 전기 용량을 초과하지 마십시오.
  • This product is designed for use with NEMA L14-30P compatible plugs only.
  • Keep the weatherproof cap closed when the outlet is not in use to protect against moisture and dust.

패키지 내용

  • 1 x Veepeak 30 Amp NEMA L14-30R Flanged Outlet
  • 설치 나사

명세서

사양
Amp에라 지30 Amps
권tage125/250볼트 AC
NEMA 구성L14-30R
Poles / Wires3 Pole, 4 Wire Grounding
최대 부하7500 와트
추천 와이어 게이지10AWG/4C
재료폴리염화비닐(PVC)
인증ETL Listed (Conforms to UL & CSA standards)
필요한 구멍 크기2.5인치

설정 및 설치

필요한 도구: Screwdriver, wire strippers, drill (for mounting hole), appropriate drill bit.

  1. 장착 위치 준비: Choose a suitable, dry location for installation. Drill a 2.5-inch diameter hole for the receptacle body. Ensure there is enough space behind the mounting surface for wiring connections.
  2. 배선 연결:

    Refer to the wiring diagram below and the color-coded terminals on the back of the receptacle. Strip approximately 1/2 inch of insulation from each wire. Insert the wires into the corresponding terminals and tighten the screws securely. Ensure no bare wire strands are exposed outside the terminals.

    뒤쪽에 view of the Veepeak L14-30R flanged outlet showing color-coded wiring terminals.

    이미지: 후면 view of the L14-30R outlet, displaying the four color-coded terminals for wiring connections (Green for Ground, White for Neutral, Red and Black for Hot).

    NEMA L14-30R wiring diagram showing X, Y, W, G terminals for 125/250 Volt, 30 Amp 연결.

    Image: NEMA L14-30R configuration diagram. 'X' and 'Y' are hot lines (125V each to neutral, 250V between them), 'W' is neutral, and 'G' is ground.

    • 녹색(G): 접지선.
    • 화이트(W): 중성선.
    • Black (X): Hot wire (Line 1).
    • Red (Y): Hot wire (Line 2).
  3. 콘센트를 설치하세요: Insert the receptacle body into the drilled hole. Secure the flanged outlet to the mounting surface using the provided screws. Ensure it is flush and stable.
  4. 복원력 : 설치가 완료되고 모든 연결이 확인되면 회로 차단기에서 전원을 다시 켜십시오.
앞쪽 view of the Veepeak L14-30R flanged outlet with the weatherproof cap open, showing the locking receptacle.

이미지: 앞면 view of the Veepeak L14-30R flanged outlet with its weatherproof cap open, revealing the NEMA L14-30R locking receptacle.

작동 지침

  1. Opening the Cap: Lift the weatherproof cap to access the receptacle.
  2. Connecting a Plug: Align the NEMA L14-30P plug with the receptacle. Insert the plug and twist clockwise to lock it into place. Ensure the plug is fully seated and locked.
  3. Disconnecting a Plug: Twist the plug counter-clockwise to unlock, then pull it straight out from the receptacle.
  4. Closing the Cap: When the outlet is not in use, ensure the weatherproof cap is securely closed over the receptacle to protect it from environmental elements like rain, snow, and dust.
앞쪽 view of the Veepeak L14-30R flanged outlet with the weatherproof cap closed, protecting the receptacle.

이미지: 앞면 view of the Veepeak L14-30R flanged outlet with its weatherproof cap securely closed, providing protection.

유지

정기적인 유지관리를 통해 최적의 성능과 안전성을 확보할 수 있습니다.

  • 청소: Periodically clean the exterior of the outlet with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the cap is closed during cleaning.
  • 점검: Regularly inspect the outlet for any signs of damage, wear, or corrosion. Check the weatherproof cap for proper sealing.
  • 연결 확인: Annually, or if issues arise, disconnect power and check the wiring connections for tightness. Loose connections can cause overheating.

문제 해결

  • 전원 없음:
    • 해당 회로의 차단기 또는 퓨즈를 확인하십시오. 차단된 경우 재설정하십시오.
    • 전원이 활성화되어 있는지 확인하세요.
    • Ensure the plug is fully inserted and locked into the receptacle.
  • 느슨한 연결:
    • If the plug feels loose or power is intermittent, disconnect power and inspect the wiring connections at the back of the receptacle for tightness.
    • Inspect the plug on the appliance for damage.
  • Damage to Outlet:
    • If the outlet housing or terminals show signs of damage, cracking, or burning, discontinue use immediately and replace the unit.

문제 해결 단계를 시도해도 문제가 해결되지 않으면 자격을 갖춘 전기 기술자에게 문의하십시오.

보증 및 지원

Veepeak provides a one-year hassle-free replacement warranty for this product. For warranty claims or customer service inquiries, please contact Veepeak customer support through the retailer where the product was purchased or visit the official Veepeak web대지.

관련 문서 - L14-30R

사전view Veepeak ObdCheck VP11에 대한 자주 묻는 질문(FAQ) 및 문제 해결
Umfassende FAQ 및 세부사항 Fehlerbehebung für den Veepeak OBDCheck VP11(V2.2509). Finden Sie Antworten auf häufige Fragen zur Kompatibilität, Verbindung und Nutzung mit verschiedenen Fahrzeugen und Apps.
사전view OBDCheck BLE FAQ 및 문제 해결 가이드
Veepeak OBDCheck BLE OBD-II 스캐너에 대한 포괄적인 FAQ 및 문제 해결 가이드입니다. 앱 호환성, 차량 지원, 연결 문제 및 사용 방법에 대한 일반적인 질문에 대한 답변을 찾아보세요.
사전view Veepeak OBDCheck BLE 사용자 지침
Veepeak OBDCheck BLE Bluetooth OBD II 스캐너에 대한 사용자 지침으로, 차량 호환성, 앱 권장 사항, 설정 가이드, FAQ, 문제 해결, 보증 및 면책 조항이 포함되어 있습니다.
사전view Veepeak OBDCheck VP11 사용 설명서 및 가이드
Veepeak OBDCheck VP11 OBD-II 스캔 도구에 대한 포괄적인 사용자 설명서로, 차량 호환성, 앱 권장 사항, 설정, FAQ, 문제 해결 및 보증 정보를 다룹니다.
사전view VEEPEAK OBDCheck VP11 사용 설명서: 기능, 설정 및 문제 해결 가이드
VEEPEAK OBDCheck VP11 블루투스 OBD2 진단 스캐너의 종합 사용 설명서입니다. 기능, 설치 방법, 호환 차량 및 앱, 문제 해결 팁, 지원 정보를 확인해 보세요.
사전view Veepeak OBDCheck VP11: FAQ 및 문제 해결 가이드
Android 기기에 맞춰 설계된 Veepeak OBDCheck VP11 OBD2 스캐너에 대한 일반적인 질문에 대한 답변과 문제 해결 솔루션을 찾아보세요.