제품 끝view
The Lockwood 005/B2LSCDP Paradigm Square Rose Universal Satin Chrome Double Cylinder Deadbolt is designed to provide enhanced security and convenience for both residential and architectural applications. This deadbolt features a high-security cut-resistant stainless steel bolt and a slimline design. It incorporates innovative features such as safety release, LockAlert, and DualSelect for improved functionality and user awareness.
Image: The Lockwood 005/B2LSCDP Paradigm Double Cylinder Deadbolt, showing its square rose design and the key cylinder on the exterior side. The internal mechanism with the bolt is also visible.
설정 및 설치
Proper installation is crucial for the optimal performance and security of your Lockwood deadbolt. It is recommended that installation be performed by a qualified professional.
필요한 도구:
- 십자 드라이버
- 줄자
- 연필
- Drill with appropriate bits (if pre-drilled holes are not present)
- Chisel (for mortising, if required)
설치 단계:
- 문 준비: Ensure the door is properly prepared with the correct bore holes and backset. Refer to the template provided with the product packaging for precise measurements.
- 래치 볼트를 설치하세요: Insert the latch bolt into the edge of the door, ensuring the bevel faces the door frame. Secure it with the provided screws.
- 외부 실린더를 설치하십시오: Place the exterior cylinder assembly through the bore hole from the outside of the door.
- 내부 조립 설치: Align the interior assembly with the exterior cylinder and secure it using the through-bolts. Ensure the deadbolt operates smoothly before fully tightening.
- 스트라이크 플레이트 설치: Mark and chisel out the recess for the strike plate on the door frame. Secure the strike plate with the provided screws, ensuring the bolt extends fully into the strike when locked.
- 테스트 작업: Test the deadbolt with the key from both the interior and exterior sides to ensure smooth locking and unlocking.
For detailed diagrams and specific measurements, please consult the full installation guide included in the product packaging.
작동 지침
The Lockwood Paradigm deadbolt offers secure and convenient operation.
데드볼트 잠금:
- 외부에서: Insert the key into the cylinder and rotate it to extend the deadbolt. Remove the key.
- 내부에서: Insert the key into the cylinder and rotate it to extend the deadbolt. Remove the key.
데드볼트 잠금 해제:
- 외부에서: Insert the key into the cylinder and rotate it to retract the deadbolt. Remove the key.
- 내부에서: Insert the key into the cylinder and rotate it to retract the deadbolt. Remove the key.
특별 기능:
- LockAlert: This feature provides a visual indication of the deadbolt's status (locked/unlocked). Refer to the product's specific LockAlert indicator for details.
- DualSelect: Allows for different locking modes. Consult your product's specific instructions for how to engage and disengage DualSelect modes.
- 안전 정보 공개: Designed for emergency egress, this feature allows for quick unlocking from the inside.
유지
Regular maintenance ensures the longevity and smooth operation of your deadbolt.
- 청소: 외부 마감재를 부드러운 천으로 닦으십시오.amp 천으로 닦아주세요. 연마성 세제나 강한 화학 물질은 마감재를 손상시킬 수 있으므로 사용하지 마세요.
- 매끄럽게 하기: Periodically apply a small amount of graphite-based lubricant or a silicone-based spray specifically designed for locks into the keyway. Do not use oil-based lubricants as they can attract dirt and debris.
- 나사 확인: Occasionally check and tighten any loose mounting screws to ensure the deadbolt remains securely fastened to the door.
문제 해결
If you encounter issues with your deadbolt, refer to the following common troubleshooting steps:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 열쇠를 끼우거나 돌리는 것이 어렵습니다. | Dirt/debris in keyway, worn key, or misaligned cylinder. | Clean keyway with compressed air, lubricate with graphite, try a new key, or check cylinder alignment. |
| 데드볼트가 완전히 확장되거나 수축되지 않습니다. | Misaligned strike plate, loose screws, or internal mechanism issue. | Adjust strike plate, tighten mounting screws, or contact customer support if mechanism is faulty. |
| Deadbolt rattles or feels loose. | 장착 나사가 헐거워졌거나 부품이 마모되었습니다. | Tighten all visible screws. If issue persists, professional inspection may be needed. |
If these steps do not resolve the issue, please contact Lockwood customer support.
명세서
| 기인하다 | 세부 사항 |
|---|---|
| 모델 번호 | 005/B2LSCDP |
| 상표 | 록우드 |
| 제조업체 | 아사 아블로이 |
| 제품 치수 | 17 x 8.5 x 6.5cm |
| 품목 무게 | 1kg |
| 색상 | 은 |
| 스타일 | 현대의 |
| 마치다 | 우아한 |
| 재료 | 스테인리스 스틸 |
| 모양 | 정사각형 |
| 특별 기능 | 절단 방지 |
| 잠금 유형 | 더블 실린더 데드 볼트 |
보증 정보
Lockwood products are manufactured to the highest standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Lockwood web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
고객 지원
For further assistance, technical support, or to inquire about replacement parts, please contact Lockwood customer service. Contact details can typically be found on the product packaging or the official Lockwood web대지.
온라인 리소스: Visit the official Lockwood website for FAQs, additional product documentation, and support contact information.
