댄포스 25T65 077B0033 표준 냉장고 온도 조절기 사용 설명서

1. 서론

This manual provides essential information for the proper installation, operation, and maintenance of your Danfoss 25T65 077B0033 Standard Refrigerator Thermostat. Please read these instructions carefully before proceeding with installation or use to ensure safe and efficient performance. This thermostat is designed for use in refrigerators to regulate internal temperature.

2. 안전 정보

경고: Electrical work should only be performed by qualified personnel. Disconnect power to the appliance before installing or servicing the thermostat to prevent electric shock.

• Always disconnect the refrigerator from the main power supply before attempting any installation, maintenance, or repair.
• Ensure that all wiring connections are secure and comply with local electrical codes.
• Do not operate the refrigerator if the thermostat or any other electrical component is damaged.
• Keep children away from the appliance during installation and maintenance.

3. 제품 오버view

The Danfoss 25T65 077B0033 is a standard refrigerator thermostat designed to control the cooling cycle of your appliance. It features a capillary tube for temperature sensing and electrical terminals for connection to the refrigerator's compressor and power supply. The thermostat is crucial for maintaining the desired temperature range within the refrigerator compartment.

그림 1: 상향식 view of the Danfoss 25T65 077B0033 Refrigerator Thermostat, showing the main body and coiled capillary tube.

그림 2: 클로즈업 view of the thermostat body, showing model number BN 077B0033 0662 and temperature settings.

4. 설정 및 설치

Installation of this thermostat typically involves replacing an existing unit. Due to the electrical and refrigeration system components involved, professional installation by a qualified technician is highly recommended.

4.1. 사전 설치 단계

1. 전원 분리: 냉장고의 플러그를 벽면 콘센트에서 뽑거나 냉장고에 전원을 공급하는 차단기를 끄십시오.
2. 온도 조절 장치 접근: Locate and access the existing thermostat within your refrigerator. This may require removing control panels or other components.
3. 문서 배선: Carefully note or photograph the wiring connections of the old thermostat before disconnecting them. This will aid in correct re-connection.

4.2. 설치 절차

1. 기존 온도 조절 장치 제거: Disconnect the wires and carefully remove the old thermostat and its capillary tube.
2. 새로운 온도 조절 장치 설치: Mount the new Danfoss 25T65 077B0033 thermostat in the same location as the old one.
3. 배선 연결: Connect the electrical wires to the new thermostat's terminals according to your documented wiring scheme. Ensure connections are secure.

그림 3: 클로즈업 view of the electrical terminals on the thermostat, showing connection points for wiring.

4. 모세관 튜브 위치: Carefully route and position the capillary tube in the same manner as the original. The placement of the capillary tube is critical for accurate temperature sensing. Do not bend or kink the tube sharply.
5. 재조립: Reassemble any panels or components that were removed to access the thermostat.
6. 복원력 : 냉장고 플러그를 벽면 콘센트에 다시 꽂거나 차단기를 켜세요.

5. 사용 설명서

The Danfoss 25T65 077B0033 thermostat operates automatically to maintain the set temperature within your refrigerator. Once installed, the thermostat senses the internal temperature via its capillary tube and cycles the compressor on and off as needed.

5.1. 온도 조절

Temperature adjustment is typically done via a control knob connected to the thermostat shaft. Rotate the knob to select the desired cooling level. Higher numbers or colder settings will result in the compressor running more frequently, leading to lower internal temperatures.

그림 4: 측면 view of the thermostat, showing the shaft where a control knob would be attached for temperature adjustment.

5.2. 초기 작업

After installation and power restoration, allow the refrigerator several hours to reach the set temperature. Avoid opening the refrigerator door frequently during this initial period.

6. 유지관리

The Danfoss 25T65 077B0033 thermostat is a sealed unit and requires no routine maintenance. However, ensuring the refrigerator's overall cleanliness and proper functioning of other components can contribute to the thermostat's longevity.

• Regularly clean the refrigerator interior and exterior.
• Ensure the refrigerator door seals are intact and functioning correctly to prevent warm air from entering.
• Keep the condenser coils clean to allow for efficient heat dissipation, which can impact the thermostat's performance.

7. 문제 해결

If your refrigerator is not maintaining the correct temperature, the thermostat may be a contributing factor. Before assuming the thermostat is faulty, check other common issues.

7.1. 일반적인 문제 및 해결 방법

• 냉장고가 식지 않음:
  • 냉장고가 플러그에 꽂혀 있고 전원이 공급되는지 확인하세요.
  • Ensure the temperature control knob is set to a cold enough setting.
  • Verify that the condenser coils are clean and not obstructed.
  • Check if the door seals are intact and the door is closing properly.
  • If these checks do not resolve the issue, the thermostat or compressor may require professional inspection.
• Refrigerator Too Cold (Freezing Food):
  • Adjust the temperature control knob to a warmer setting.
  • Ensure the capillary tube is correctly positioned and not dislodged.
  • If the issue persists, the thermostat may be faulty and require replacement.
• Compressor Runs Constantly:
  • 도어 씰에 누수가 있는지 확인하세요.
  • Ensure the refrigerator is not overloaded with warm food.
  • Verify that the condenser coils are clean.
  • A constantly running compressor can indicate a faulty thermostat that is not cycling off, or a problem with the refrigeration system itself.

For complex issues or if you are unsure about any troubleshooting steps, contact a qualified appliance repair technician.

8. 사양

9. 보증 및 지원

For specific warranty information regarding your Danfoss 25T65 077B0033 thermostat, please refer to the documentation provided at the time of purchase or contact your retailer. Warranty terms can vary based on region and seller.

If you require technical support or have questions not covered in this manual, please contact Danfoss customer service or a certified appliance technician. When contacting support, have your product model number (077B0033) and purchase details readily available.