소개
W는ampler Catacombs is a programmable, all-in-one delay and reverb pedal designed to provide a wide range of time-based effects for musicians. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Catacombs pedal.
제품 끝view
The Catacombs pedal integrates 11 popular delay and reverb sounds into a single, intuitive unit. It features studio-quality 48 kHz sampling rate with 24-bit audio conversion, 8 onboard preset locations, and MIDI compatibility for up to 128 total presets.
그림 1: 앞쪽 view W의ampler Catacombs pedal, showing controls for delay and reverb effects, input/output jacks, and footswitches.
그림 2: 각진 view W의ampler Catacombs pedal, highlighting its compact design and various control knobs.
설정
전력 요구 사항
W는ampler Catacombs pedal requires a standard 9V DC power supply (not included) with a center-negative barrel connector. Ensure the power supply provides sufficient current for optimal performance.
페달 연결하기
- 악기(예: 기타)를 연결하세요. 모노 입력 or 스테레오 입력 페달 오른쪽 측면에 있는 잭에 표준 1/4인치 악기 케이블을 사용하여 연결합니다.
- 연결하다 모노 출력 or 스테레오 OUT 페달 왼쪽의 잭을 당신의 것에 연결하세요 amp리파이어 또는 넥스트 이펙트 페달.
- Connect the 9V DC power supply to the 9V 직류 입력 잭.
- For MIDI control, connect a MIDI cable to the 미디 입력.
작동 지침
컨트롤 오버view
- Delay Type Knob: Selects between various delay types including Tape, SPC, FTE, BBD, ANLG, and DIGI.
- Reverb Type Knob: Selects between reverb types such as SHMR (Shimmer), PLT (Plate), SPR (Spring), ROOM, and HALL.
- Time/Shimmer Knob: Adjusts the delay time or shimmer intensity depending on the selected effect.
- Feedback/Decay Knob: Controls the number of delay repeats or the reverb decay time.
- Mod Rate Knob: Adjusts the modulation rate for effects with modulation.
- Delay Tone Knob: Shapes the tone of the delay repeats.
- Reverb Tone Knob: Shapes the tone of the reverb effect.
- Bypass/ALT Footswitch: Toggles the effect on/off. Hold to access alternate functions (ALT mode).
- Preset/Save Footswitch: Cycles through presets. Hold to save current settings to a preset location.
- 탭 템포 풋스위치: Taps in the desired delay tempo.
설정 저장 및 불러오기
The Catacombs pedal allows for 8 onboard preset locations. To save a preset, adjust the knobs to your desired sound, then press and hold the Preset/Save footswitch until the indicator lights confirm the save. To recall a preset, short press the Preset/Save footswitch to cycle through the saved locations.
Alternate Functions (ALT Mode)
Some knobs have alternate functions accessible by holding the Bypass/ALT footswitch. When in ALT mode, the indicator light will change (e.g., from blue to red as noted in some user feedback), allowing you to adjust secondary parameters. Release the footswitch to return to normal operation.
유지
To ensure the longevity and optimal performance of your Wampler Catacombs pedal, follow these maintenance guidelines:
- Keep the pedal clean by wiping it with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- 페달은 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.
- 장기간 사용하지 않을 경우 전원을 차단하십시오.
- 모든 케이블 연결부가 안전하게 고정되었는지 정기적으로 점검하세요.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 페달을 밟아도 소리가 나지 않습니다. | Incorrect power supply, faulty cables, incorrect input/output connections. | Verify power supply is 9V DC center-negative. Check all instrument cables. Ensure input is connected to IN and output to OUT. |
| Effect is too subtle or too extreme. | Knobs are set incorrectly, or in ALT mode unintentionally. | Adjust the relevant control knobs (Time, Feedback, Tone). Check if the pedal is in ALT mode and adjust accordingly. |
| Cannot save or recall presets. | 풋스위치 조작 오류. | 당신이 잡고 있는지 확인하십시오 Preset/Save footswitch long enough to save. For recalling, use short presses. |
| 소음 또는 웅웅거림. | 접지 루프, 전원 공급 불량, 간섭. | Use an isolated power supply. Try different cables. Ensure proper grounding of all equipment. |
명세서
- 모델: CATACOMBS
- 치수: 7.25 x 5.7 x 3.75 인치
- 품목 무게: 1.39파운드
- 전원: Corded Electric (9V DC, center-negative, power supply not included)
- 신호 형식: 비슷한 물건
- 오디오 출력 효과: 딜레이, 리버브
- Samp링 비율: 48kHz
- Audio Bit Depth: 24비트
- 사전 설정 : 8 onboard, 128 via MIDI
- Manufacture Location: Designed and Built in the USA
보증 및 지원
Wampler Pedals products are designed and built to high standards. For warranty information and technical support, please refer to the official Wamp러 페달 web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
추가 지원을 받으려면 다음을 방문하세요. Wampler Store on Amazon.
