소개
This manual provides essential information for the safe and effective use of your Insignia Power Manager 12-Outlet Surge Protector (Model: 25C25B). This device is designed to safeguard your electronic equipment from power surges, spikes, and other electrical disturbances, while also providing additional power outlets for your convenience.
Key features include a 4350-joule rating for robust protection, 12 surge-protected outlets (including 4 AC adapter-spaced and 4 always-on outlets), an 8-foot power cord with a right-angle plug for flexible placement, 58dB maximum noise filtering, an energy-saving on/off switch, and LED indicators for surge and ground status.
Image: The Insignia Power Manager 12-Outlet Surge Protector, showcasing its design and multiple outlets.
안전 정보
본 제품을 사용하기 전에 모든 안전 지침을 읽고 숙지하십시오. 이 지침을 따르지 않을 경우 감전, 화재 또는 제품이나 연결된 장치가 손상될 수 있습니다.
- 실내에서만 사용 가능: This surge protector is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
- 전기 등급 : Do not exceed the electrical rating of the surge protector. Refer to the specifications section for details.
- 접지: Ensure the wall outlet is properly grounded. The surge protector must be plugged into a three-prong grounded outlet.
- 데이지 체인을 피하세요. Do not plug one surge protector into another.
- 통풍: 통풍구를 막지 마십시오.
- 어린이와 애완동물: 어린이와 애완동물의 손이 닿지 않는 곳에 보관하세요.
- 점검: Regularly inspect the surge protector and its cord for any signs of damage. Discontinue use if damaged.
설정
- 풀다: Carefully remove the surge protector from its packaging. Retain packaging for future storage or transport.
- 놓기: Place the surge protector on a stable, flat surface, away from sources of water or excessive heat. The 8-foot power cord with a right-angle plug allows for flexible placement, even in tight spaces or behind furniture.
- 벽면 콘센트에 연결: Plug the surge protector's power cord directly into a standard, grounded 120V AC wall outlet. Do not plug it into an extension cord or another surge protector.
- 지표 확인: Once plugged in, check the LED indicators on the surge protector. The 'Protected' and 'Grounded' indicators should illuminate, confirming that the unit is functioning correctly and the wall outlet is properly grounded.
- 장치 연결: Plug your electronic devices into the available outlets on the surge protector. Utilize the AC adapter-spaced outlets for larger power adapters to prevent blocking adjacent outlets.
Image: (No specific image URL provided for setup, but a visual showing the right-angle plug connected to a wall outlet would be beneficial here.)
운영
- 전원 장치: Once your devices are plugged into the surge protector and the unit is connected to a wall outlet, they will receive power.
- Energy Savings On/Off Switch: Use the master On/Off switch to control power to all connected devices simultaneously. This switch allows for simple power conservation by cutting power to all devices when not in use, preventing standby power drain.
- LED 표시등:
- 보호된 LED: When illuminated, this indicates that the surge protection circuitry is active and protecting your devices. If this light goes out, the surge protection has been compromised, and the unit should be replaced.
- Grounded LED: When illuminated, this indicates that the wall outlet is properly grounded. If this light is not on, the wall outlet may not be grounded, and you should consult a qualified electrician.
- Always-On Outlets: Four of the 12 outlets are designated as 'always-on' outlets. These outlets remain powered regardless of the state of the energy savings on/off switch, suitable for devices that require continuous power.
Image: (No specific image URL provided for LED indicators, but a close-up of the LED lights and the On/Off switch would be helpful here.)
유지
- 청소: 청소하기 전에 서지 보호기를 벽면 콘센트와 연결된 모든 기기에서 분리하십시오. 부드럽고 마른 천으로 외부를 닦으십시오. 액체 세척제나 스프레이를 사용하지 마십시오.
- 서지 보호 실패: If the 'Protected' LED indicator turns off, it means the surge protection components have absorbed a significant surge and are no longer providing protection. The unit will still function as a power strip, but your devices will no longer be protected from surges. In this event, the surge protector should be replaced to ensure continued protection.
- 정기 검사: Periodically check the power cord and the surge protector housing for any signs of damage, such as fraying, cuts, or cracks. If damage is found, discontinue use immediately and replace the unit.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 연결된 장치에 전원이 공급되지 않습니다. | Surge protector not plugged in; On/Off switch is off; Wall outlet has no power; Circuit breaker tripped. | Ensure surge protector is firmly plugged into a live wall outlet. Turn the On/Off switch to the 'On' position. Check the wall outlet with another device. Reset your home's circuit breaker if necessary. |
| '보호됨' LED가 꺼져 있습니다. | Surge protection components have been compromised. | The surge protector has absorbed a surge and can no longer provide protection. Replace the unit to ensure continued protection for your devices. |
| '접지됨' LED가 꺼져 있습니다. | 벽면 콘센트가 제대로 접지되지 않았습니다. | Consult a qualified electrician to inspect and correct the wiring of your wall outlet. Do not use the surge protector with an ungrounded outlet. |
| Devices are still damaged after a power event. | Extreme power surge exceeded unit's capacity; Unit was not properly grounded. | While this surge protector offers significant protection, extreme events can sometimes bypass protection. Ensure the 'Grounded' LED is always on. Consider replacing the unit after any significant power event. |
명세서
- 모델 번호: 25C25B
- 상표: INSIGNIA
- 총 전원 콘센트: 12 (including 4 AC adapter-spaced and 4 always-on)
- 서지 보호 등급: 4350 줄
- 노이즈 필터링: 최대 58dB
- 전원 코드 길이: 8 feet (with right-angle plug)
- 품목 무게: 12.7 온스
- 패키지 크기: 13.78 x 7.32 x 2.13 인치
- 특징: Energy savings on/off switch, LED indicators (Surge, Grounded)
보증 및 지원
For warranty information, technical support, or customer service regarding your Insignia Power Manager 12-Outlet Surge Protector, please refer to the official INSIGNIA web사이트를 방문하거나 고객 지원팀에 직접 문의하세요. 보증 청구를 위해 구매 영수증을 보관하세요.
You can typically find contact information and detailed warranty terms on the manufacturer's official support pages. Please have your model number (25C25B) available when contacting support.