제품 끝view
The Stealth JHT100 is a 32-inch tower PTC ceramic heater designed for efficient and quiet heating in various indoor spaces. It features multiple operating modes, a programmable timer, and advanced safety protections.
Image: The Stealth JHT100 tower heater in a room setting, showcasin세련된 디자인이에요.
안전 정보
Your safety is paramount. Please read and understand all safety instructions before operating this appliance.
- 넘어짐 방지: The heater is equipped with an internal switch that automatically shuts off the unit if it is accidentally tipped over.
- 과열 보호: An integrated overheat sensor will automatically turn off the heater if it reaches an unsafe temperature.
- V0 난연 소재: Constructed with V0 flame retardant materials for enhanced safety.
- Polarized Safety Plug: Features a polarized plug to reduce the risk of electric shock.
- 히터는 항상 단단하고 평평한 표면에 놓아야 합니다.
- 히터를 덮거나 공기 흡입구/배출구를 막지 마십시오.
- 가연성 물질은 히터로부터 최소 3피트(0.9m) 떨어진 곳에 보관하세요.
- Do not use in wet or moist locations.
Image: Diagram illustrating the multiple safety features of the heater, including tip-over and overheat protection.
패키지 내용
포장을 뜯으시면 아래 나열된 모든 품목이 있는지, 손상되지 않았는지 확인해 주십시오.
- Stealth JHT100 Tower Heater Unit
- Detachable Base (2 halves)
- Mounting Screws for Base
- Remote Control (with pre-installed battery and plastic tab)
- 사용 설명서
설정
- 기본 조립:
Align the two halves of the detachable base and snap them together. Ensure the power cord passes through the designated slot in the base. Secure the base to the bottom of the heater unit using the provided screws. This step is crucial for stability and safety.
Image: A person demonstrating the assembly of the heater's base, showing the separate base parts and the attachment points.
- 원격 제어 설정:
The remote control comes with a plastic tab separating the battery from the contacts to preserve battery life. Gently pull out this plastic tab before first use. The remote requires a CR2025 lithium cell 3V battery.
- 전원 연결:
Plug the polarized power cord into a suitable 120V AC electrical outlet. Ensure the outlet is in good condition and not overloaded.
작동 지침
The Stealth JHT100 heater can be operated using the touch control panel on top of the unit or the included remote control.
Image: Close-up of the touch control panel on top of the heater, showing the power, mode, oscillation, and timer buttons.
1. 전원 켜기/끄기
- 주 전원 스위치 : Locate the main power switch at the back of the heater, near the base. Flip it to the "ON" position. A red indicator light will appear on the front display.
- Unit Power Button: 를 누르세요 전원 버튼 (
)을 눌러 히터를 켜거나 끕니다.
2. Heat Modes
The heater offers 4 modes: Low Heat (700W), High Heat (1500W), and Fan Only. The unit cycles through these modes with each press of the Mode button.
- 를 누르세요 모드 버튼 (
) to cycle through the available heating and fan modes. The red indicator light will adjust to reflect the selected mode (e.g., longer bar for higher heat).
Image: Diagram showing the internal PTC heating elements and the two heat settings: Low Heat (700W) and High Heat (1500W).
3. 진동
Activate the 70° wide oscillation feature to distribute warmth evenly across a larger area.
- 를 누르세요 진동 버튼 (
) to start or stop the oscillation function.
이미지: 오버헤드 view illustrating the 70-degree auto oscillation feature, showing heat distribution across a room.
4. 타이머 기능
Set a timer for automatic shut-off, ranging from 1 to 6 hours, in 1-hour increments.
- 를 누르세요 타이머 버튼 (
) repeatedly to select the desired shut-off time (1H, 2H, 3H, 4H, 5H, 6H). - To cancel the timer, continue pressing the Timer button until no timer indicator is displayed, or press it a seventh time to cycle back to no timer.
Image: A person sleeping peacefully with the heater operating quietly in the background, highlighting the 6-hour timer feature.
5. 원격 제어
The remote control duplicates all functions available on the unit's top control panel for convenient operation from a distance. Store the remote in the designated slot on the back of the heater when not in use to prevent misplacement.
유지
정기적인 유지관리를 통해 히터의 최적의 성능과 수명을 보장할 수 있습니다.
- 공기 필터 청소: The heater features a removable and washable air filter located at the back. Periodically remove the filter and clean it with mild soap and warm water to prevent dust buildup and maintain air quality. Ensure the filter is completely dry before reinserting.
- 외부 청소: 히터 외부를 부드러운 천으로 닦으세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- Always unplug the heater from the power outlet before performing any cleaning or maintenance.
Image: Diagram showing the removable mesh air filter at the back of the heater, indicating it can be cleaned.
문제 해결
If your heater is not functioning as expected, please consult the following common issues and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 히터가 켜지지 않습니다. |
|
|
| 히터가 예기치 않게 꺼집니다. |
|
|
| 열 출력이 낮습니다. |
|
|
명세서
- 상표: 몰래 하기
- 모델 번호: JHT100
- 폼 팩터: 탑
- 열 출력 : 1500 와트
- Amp나이: 12.5 Amps
- 제품 크기: 8 x 11 x 32 인치
- 품목 무게: 10.58파운드
- 전원: 코드식 전기
- 가열 방법: Convection, Forced Air
- 진동: 70° 광범위 진동
- 시간제 노동자: 1-6시간
- 안전 기능: Tip-Over Protection, Overheat Protection, V0 Flame Retardant Materials, Polarized Safety Plug
Image: The 32-inch tall heater with a convenient carry handle, illustrating its portable design.
보증 및 지원
Stealth products are covered by a 24-month manufacturer and distributor warranty. This warranty covers defects in materials and workmanship of the enclosed product. It does not cover problems caused by misuse, abuse, acts of God (such as floods, hurricanes), consequential, or incidental damages.
The warranty coverage terminates if you sell or otherwise transfer the ownership of the product.
If you believe you have a defective product, please contact us first. We will assist you to solve the issues within 24 hours.
For support, please refer to the contact information provided on your warranty card or visit the official Stealth web대지.
