Sonix A20-M436-0011

Sonix Case for iPhone 15 Plus, iPhone 14 Plus Instruction Manual

Model: A20-M436-0011

소개

This manual provides instructions for the proper installation, use, and maintenance of your Sonix protective case for iPhone 15 Plus and iPhone 14 Plus. This case is designed to offer robust protection while maintaining full functionality of your device, including MagSafe compatibility.

제품 특징

설정 및 설치

Follow these steps to properly install your Sonix case:

  1. 기기를 청소하세요: Ensure your iPhone 15 Plus or iPhone 14 Plus is clean and free of dust or debris before installation.
  2. 케이스 정렬: Hold the case with the back facing up. Carefully align the camera cutout of the case with your phone's camera module.
  3. 한쪽 면을 삽입하세요: Gently push one side of your phone into the case, starting with the volume button side or the power button side.
  4. Secure the Other Side: Once one side is in, gently press the other side of the phone into the case until it snaps securely into place. Ensure all edges of the phone are fully seated within the case's protective frame.
  5. 적합성 확인: Check that all buttons are accessible and functional, and that the charging port is unobstructed.
Sonix Cherry on Top Glitter Case for iPhone 15 Plus and 14 Plus, front and back view
그림 1: 앞면과 뒷면 view of the Sonix Cherry on Top Glitter case, showing the MagSafe ring on the back.
Compatibility chart for Sonix iPhone cases
Figure 2: Compatibility chart illustrating the correct fit for iPhone 15 Plus and iPhone 14 Plus models, and incorrect fits for other iPhone models.

작동 지침

Once installed, your Sonix case operates seamlessly with your iPhone. No special operational steps are required beyond standard phone usage.

MagSafe Functionality

The integrated magnets in your Sonix case allow for secure attachment of MagSafe-compatible accessories. Simply align your MagSafe charger or accessory with the back of the case; the magnets will automatically snap it into place. This enables efficient wireless charging and secure accessory use.

Close-up of Sonix case showing MagSafe compatibility
그림 3: 상세 view of the MagSafe ring integrated into the Sonix case, highlighting its magnetic functionality.

낙하 보호

The case is designed to protect your device from drops up to 10 feet. Its construction includes:

Sonix case on iPhone demonstrating 10ft drop test certification
Figure 4: Image depicting the Sonix case on an iPhone, emphasizing its 10ft drop test certification.

유지

To keep your Sonix case in optimal condition:

문제 해결

Issue: Case does not fit correctly.
해결책: Ensure you have the correct model case for your iPhone. This specific case is designed for iPhone 15 Plus and iPhone 14 Plus. Refer to Figure 2 for compatibility verification. If the model is correct, try re-installing the case, ensuring all edges are properly seated.
Issue: MagSafe accessories do not attach securely.
해결책: Verify that the accessory is genuinely MagSafe compatible. Ensure there is no debris or foreign material between the case and the accessory that might interfere with the magnetic connection.

명세서

상표소닉스
모델 번호A20-M436-0011
호환되는 전화 모델iPhone 15 Plus, iPhone 14 Plus
색상Glitter - Cherry
재료열가소성 폴리우레탄(TPU)
제품 치수0.4 x 3.25 x 6.5 인치
품목 무게2.08 온스
낙하 보호10 피트

보증 및 지원

This Sonix case includes a Sonix Lifetime Warranty. For warranty claims or further support, please refer to the official Sonix web사이트를 방문하거나 고객 서비스에 직접 문의하세요.

관련 문서 - A20-M436-0011

사전view Sonix SNM9390: 2.4G RF 트랜시버 모듈 데이터시트
Sonix SNM9390 2.4G RF 송수신기 모듈에 대한 상세 데이터시트입니다. GFSK 변조, 높은 데이터 전송 속도, 저전력 작동 및 무선 통신 애플리케이션을 위한 SPI 인터페이스를 갖추고 있습니다.
사전view SONiX SN8P2501A 8비트 마이크로 컨트롤러 사용자 설명서
SONiX SN8P2501A 8비트 마이크로 컨트롤러에 대한 사용자 매뉴얼로, 임베디드 시스템 개발을 위한 기능, 아키텍처, 레지스터, 운영 모드 및 프로그래밍 가이드라인을 자세히 설명합니다.
사전view Sonix 블루투스 스피커: 사용 설명서, 기능 및 사양
Sonix 블루투스 스피커(모델 3FBTSS2LS)의 종합 사용 설명서입니다. 설정, 페어링, 안전 지침, 기술 사양 및 FCC 규정 준수에 대해 알아보세요.
사전view SONIX 32-bit MCU ISP User Guide: Firmware Update and Rolling Code
Comprehensive user guide for the SONIX 32-bit MCU ISP Tool. Learn how to update firmware, select chips, configure code security, and implement rolling code functionality for SN32Fxxx series microcontrollers.
사전view SN-Link ISP User Guide | SONIX Programming Tool
Comprehensive user guide for the SONIX SN-Link ISP (In-System Programmer) tool, detailing its features, installation, supported MCUs, connection methods, and programming procedures for embedded systems.
사전view Sonix Technology Co., Ltd. Sustainability Execution Results and Future Direction
Sonix Technology Co., Ltd.'s comprehensive report detailing sustainability execution results for 2025 and strategic future directions for 2026, covering corporate governance, environmental stewardship, social responsibility, and talent development.