1. 서론
The IKIER K1 Pro Max is an advanced laser engraving and cutting machine designed for precision and efficiency. Featuring a powerful 48W laser module, it offers high-speed operation up to 900 mm/s and includes innovative functionalities such as automatic focus, continuous engraving, and a robust cooling system. This manual provides essential information for the safe and effective use of your device.
2. 안전 정보
WARNING: Laser radiation can be dangerous. Always wear appropriate laser safety glasses when operating the machine. Never look directly into the laser beam. Ensure proper ventilation during operation.
- 눈 보호: Always wear certified laser safety glasses to protect your eyes from direct or reflected laser light.
- 통풍: 조각이나 절단 작업 중 발생하는 연기와 증기를 배출하기 위해 환기가 잘 되는 곳에서 기계를 작동하십시오.
- 감독: 작동 중에 기계를 무인 상태로 두지 마십시오.
- 인화성 물질: Avoid placing flammable materials near the laser path.
- 비상 정지 : 비상 정지 버튼의 위치를 숙지하십시오.
통합 안전 기능:
- 기울기 감지: The machine automatically stops if tilted more than 15 degrees, preventing unintended laser operation.
- 화염 감지: An integrated sensor detects open flames directly below the laser module, triggering an alarm and returning the module to its origin.
- 보안 잠금: A physical key lock prevents unauthorized use.
- Omnidirectional Limit Switch: Ensures the laser module operates within safe boundaries.
그림 1: 이상view of IKIER K1 Pro Max Safety Protections and Working Modes.
Figure 2: Flame Detection in action, showing the laser module detecting an open flame.
3. 설정
The IKIER K1 Pro Max is designed for easy setup, with most components pre-assembled. Follow these general steps for initial setup:
- 언박싱: 모든 구성품을 포장에서 조심스럽게 꺼내세요. 포장 목록에 있는 모든 부품이 있는지 확인하세요.
- 집회: Attach the X-axis to the main frame. Ensure all connections are secure.
- 전원 연결: 전원 어댑터를 기기와 적합한 전원 콘센트에 연결하세요.
- 데이터 연결: Connect the machine to your computer via USB or prepare for offline operation using a USB drive.
Figure 3: IKIER K1 Pro Max Laser Engraver with included accessories.
4. 사용 설명서
4.1 Power Modes (48W/24W)
The IKIER K1 Pro Max features a switchable laser power module, allowing you to optimize performance for different tasks:
- 48W 모드: Ideal for powerful cutting tasks, providing maximum laser intensity.
- 24W 모드: Suitable for fine engraving, offering a smaller laser spot for delicate work.
A dedicated button on the laser module allows for easy switching between these modes.
Figure 4: Switchable Power Mode illustration with varying laser spot sizes.
Figure 5: Comparison of Engraving Mode (24W) and Cutting Mode (48W).
4.2 Autofocus & Auto Air Assist
The K1 Pro Max is equipped with an electric lift for automatic focusing and integrated auto air assist:
- 자동 초점 : The electric lift automatically adjusts the laser module height to achieve optimal focus with a single touch, ensuring precision and efficiency.
- Auto Air Assist: Automatically controls airflow during cutting, improving cut quality and reducing charring.
Figure 6: Autofocus and Auto Air Assist features.
4.3 Continuous Engraving
This feature allows the machine to resume an engraving task after an unexpected interruption, such as a power outage. To use this function, save your project files to a USB drive and connect it to the machine's 4.3-inch touchscreen for offline operation. Ensure the 'Auto-home startup' setting is turned off in your software (e.g., LightBurn) to prevent interference with this function.
4.4 Auxiliary Positioning
The auxiliary positioning feature uses a red cross laser to indicate the precise focus position of the laser, aiding in accurate material placement and job setup. This is particularly useful for ensuring your design is placed exactly where intended on your material.
4.5 Sinking Cutting
Sinking cutting allows for deeper cuts by performing multiple passes, gradually lowering the laser module. This is effective for thicker materials. The fixed focus distance of the laser module is 8mm. When setting the 'Number of Passes' and 'Z step per pass' in your software, ensure that 'Number of Passes * Z step per pass' is less than 8mm to avoid triggering the limit switch.
Figure 7: Sinking Cutting capability on thick wood.
4.6 냉각 시스템
The K1 Pro Max incorporates a super cooling system to maintain optimal performance and extend the lifespan of the laser module. It features an innovative dual air duct design with four high-quality copper tubes for thermal conduction, two rows of large fins, and a high-power fan for maximum heat dissipation.
그림 8: 내부 view of the laser module's heat dissipation system.
4.7 작업 모드
The machine offers three distinct working modes to suit various project requirements:
- High-speed Mode: For rapid engraving and cutting, reaching speeds up to 900 mm/s.
- 균형 모드: The universal default mode, offering a good balance between speed and precision.
- High-precision Mode: For intricate details and superior accuracy in engraving.
4.8 소프트웨어 호환성
The IKIER K1 Pro Max is compatible with popular laser control software such as LightBurn and LaserGRBL. Refer to the software's documentation for detailed instructions on creating and executing laser projects.
5. 유지관리
정기적인 유지보수는 레이저 조각기의 수명과 최적의 성능을 보장합니다.
- 레이저 렌즈 청소: Periodically clean the laser lens with a soft, lint-free cloth and appropriate lens cleaning solution.
- 움직이는 부품에 윤활유를 바르세요: Apply a small amount of lubricant to the linear rails and lead screws to ensure smooth movement.
- 연결 확인: Regularly inspect all electrical and data connections for tightness and wear.
- 주변을 깨끗하게 유지하세요: Ensure the work area is free of dust and debris, which can affect machine performance.
6. 문제 해결
If you encounter issues with your IKIER K1 Pro Max, consider the following common troubleshooting steps:
- 기계 전원이 켜지지 않음: Check all power connections and ensure the power switch is in the 'On' position. Verify the power outlet is functional.
- 레이저가 발사되지 않음: Ensure the security key is inserted and turned to the 'On' position. Check software settings for laser power and speed.
- Engraving Deviation: Ensure the material is securely fixed and the machine is stable. Check for any loose belts or mechanical components.
- Tilt Detection Alarm: If the machine prompts 'The machine is tilted', place it on a flat, stable surface and tap 'OK' on the screen to dismiss the alarm.
- Flame Detection Alarm: If 'Flame detected' appears, ensure there is no open flame near the laser module. Restart the machine if necessary after clearing the area.
- 자동 초점 문제: Ensure the laser module can physically touch the object within its effective stroke. Keep a distance of at least 5mm between the laser slider and the base.
For more detailed troubleshooting or persistent issues, please refer to the official IKIER support resources.
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 제조업체 | 이키에르 |
| 패키지 크기 | 81.2 x 72.2 x 16.6cm; 16.96kg |
| 모델 참조 | IKIER K1 |
| 크기 | 48W 레이저 조각사 |
| 스타일 | Power Switching Laser Cutting and Engraving Machine |
| 재료 | 48W+R2 |
| 파워 타입 | AC |
| 포함된 구성 요소 | IKIER Laser Engraver |
| 배터리가 포함되어 있나요? | 아니요 |
| 배터리가 필요하세요? | 아니요 |
| 첫 번째 이용 가능 날짜 | 24년 2023월 XNUMX일 |
8. 보증 및 지원
IKIER is committed to providing quality products and customer satisfaction.
- 반품 정책: 해당 제품은 구매일로부터 31일 이내에 환불 또는 교환이 가능합니다.
- 고객 지원: For technical assistance, troubleshooting, or warranty inquiries, please visit the official IKIER website or utilize their online chat support for quick responses.
