소개
Thank you for choosing the KOORUI KR20Y Single Monitor Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor arm. Designed for 17-32 inch flat and curved screens, this mount offers VESA 75x75mm and 100x100mm compatibility and supports monitors weighing between 2-9 kg (4.4-19.8 lbs). Please read this manual thoroughly before assembly and retain it for future reference.
안전 정보
부상이나 손상을 예방하기 위해 다음 안전 예방 조치를 준수하세요.
- 최대 적재 용량은 9kg(19.8lbs)을 초과하지 마십시오.
- Ensure the mounting surface (desk) is strong enough to support the combined weight of the mount and your monitor.
- Follow all assembly instructions carefully. If you have any doubts, consult a qualified professional.
- 설치하는 동안 어린이와 애완동물이 접근하지 못하도록 하세요.
- 모든 연결부와 고정 장치를 정기적으로 점검하여 안전하게 고정되어 있는지 확인하십시오.
- Avoid pinching cables during adjustment to prevent damage.
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- 모니터 암 어셈블리
- C-Clamp 장착 하드웨어
- 그로밋 장착 하드웨어
- VESA 플레이트
- 모니터 장착 나사 (다양한 크기)
- Hex Keys / Adjustment Tools
- 케이블 관리 클립
- 사용 설명서 (본 문서)
Image: All components of the KOORUI KR20Y Monitor Arm, including the arm, C-clamp, and grommet mount options.
명세서
| 상표 | 쿠루이 |
| 모델 번호 | KR20Y |
| 화면 크기 호환성 | 17~32인치 |
| 하중 용량 | 2~9kg (4.4~19.8파운드) |
| VESA 호환성 | 75x75mm, 100x100mm |
| 장착 유형 | 책상 거치대 (C-Cl)amp 또는 그로밋) |
| 이동 유형 | Tilt, Swivel, Rotation, Height Adjustment |
| 기울기 범위 | +85° ~ -30° |
| 스위블 범위 | ±90° |
| 회전 | 360° (세로/가로) |
| 최대 팔 높이 | 15.7인치(400mm) |
| 최대 확장 | 20.8인치(530mm) |
| 재료 | 강철 |
| 색상 | 검은색 |
Image: Visual representation of the monitor arm's universal compatibility, showing supported screen sizes (17-32 inch), load capacity (2-9kg), and VESA standards (75x75mm, 100x100mm).
설정 및 설치
The KOORUI KR20Y monitor arm offers two installation options: C-Clamp Mount and Grommet Mount. Choose the method best suited for your desk.
Image: Diagram illustrating the two available installation methods: C-Clamp Mount and Grommet Mount.
1. C-Clamp 산
This method is suitable for desks with a thickness between 20-80mm (0.78-3.14 inches).
- C-cl을 부착하세요amp 받침대를 책상 가장자리에 놓으세요.
- cl을 조여주세요amp 받침대가 책상에 단단히 고정될 때까지 나사를 조이세요. 받침대가 안정적이고 흔들리지 않는지 확인하세요.
- 모니터 암의 메인 폴을 C-클러치에 삽입하십시오.amp 베이스.
- Secure the pole with the provided screw or knob.
2. Grommet Mount
This method requires a pre-drilled hole in your desk with a diameter of 10-50mm (0.39-1.96 inches) and is suitable for desks with a thickness between 20-90mm (0.78-3.54 inches).
- C-cl을 분해하세요amp components from the base if they are pre-attached.
- Insert the grommet bolt through the pre-drilled hole in your desk.
- Secure the grommet base from underneath the desk using the provided washer and nut. Tighten firmly.
- 모니터 암의 본체를 그로밋 베이스에 삽입하십시오.
- Secure the pole with the provided screw or knob.
3. 모니터 연결
- Attach the VESA plate to the back of your monitor using the appropriate screws. Ensure the screws are not overtightened.
- Slide the monitor (with the attached VESA plate) onto the arm's VESA head.
- Secure the monitor to the arm using the locking mechanism (if present) or by tightening the designated screws.
4. 케이블 관리
모니터 케이블을 암에 내장된 케이블 정리 채널을 통해 정리하여 깔끔한 작업 공간을 유지하세요.
Image: The monitor arm with cables neatly routed through its integrated cable management system, contributing to a clean desk setup.
작동 지침
The KOORUI KR20Y monitor arm features a gas spring system for smooth and effortless adjustments. Adjustments can be made to achieve an ergonomic view경험.
Image: Detailed diagram showing the full range of motion of the monitor arm, including tilt, swivel, rotation, and maximum extension/height.
1. 높이 조절
Gently push or pull the monitor up or down to adjust its height. The gas spring will hold the monitor in your desired position. If the arm is too stiff or too loose, adjust the gas spring tension (see 유지 부분).
2. 기울기 조정
Grasp the top and bottom edges of your monitor and tilt it forward or backward to achieve an optimal view기울기 각도. 기울기 범위는 +85°에서 -30°까지입니다.
3. 회전 조절
Rotate the monitor left or right at the VESA plate connection point. The swivel range is ±90°.
4. Rotation (Portrait/Landscape)
Rotate the monitor 360° to switch between landscape and portrait orientations as needed.
이미지: 엑스레이 view highlighting the premium gas spring mechanism within the monitor arm, indicating its durability and smooth adjustment capabilities.
유지
- Gas Spring Tension Adjustment: If the monitor arm does not hold its position or is difficult to move, use the provided hex key to adjust the gas spring tension. Turn clockwise to increase tension (for heavier monitors) and counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the arm moves smoothly and holds the monitor securely.
- 청소: 모니터 암을 부드러운 천으로 닦으세요.amp 천으로 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
- 정기 검사: 모든 나사와 연결부가 단단히 조여져 있고 안전한지 정기적으로 점검하십시오.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Monitor arm does not hold position. | 모니터 무게에 비해 가스 스프링 장력이 너무 낮습니다. | Increase gas spring tension using the hex key (clockwise). |
| 모니터 암이 너무 뻑뻑해서 움직이지 않습니다. | 모니터 무게에 비해 가스 스프링 장력이 너무 높습니다. | Decrease gas spring tension using the hex key (counter-clockwise). |
| 모니터가 흔들리거나 불안정하게 느껴집니다. | Mounting screws or clamp 느슨하다. | Ensure all mounting screws (VESA plate, clamp/grommet) are securely tightened. Check desk stability. |
| Cables are getting pinched. | Cables not routed correctly. | Re-route cables through the designated cable management channels, ensuring sufficient slack for movement. |
보증 및 지원
For warranty information or technical support, please refer to the warranty card included with your product or visit the official KOORUI website. If you encounter any issues not covered in this manual, please contact KOORUI customer service for assistance.
