1. 서론
This manual provides comprehensive instructions for the installation, operation, and maintenance of the PROFLO PF9312FVPK Dual Flush Valve Assembly. This product is designed for use with PROFLO PF9300 series dual flush tanks, offering an efficient solution for toilet flushing.
2. 안전 정보
설치 및 사용 전에 모든 지침을 주의 깊게 읽어 주십시오. 지침을 따르지 않을 경우 재산 피해나 신체적 부상이 발생할 수 있습니다.
- 설치 또는 유지 보수 작업을 시작하기 전에 항상 변기의 급수 밸브를 잠그십시오.
- 장갑, 보안경 등 적절한 개인 보호 장비를 착용하세요.
- 설치 과정의 어떤 부분이든 확실하지 않은 경우 자격을 갖춘 배관공에게 문의하세요.
- 작은 부품은 어린이의 손이 닿지 않는 곳에 보관하세요.
3. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- PROFLO PF9312FVPK Dual Flush Valve Assembly
- 트립 레버
- All necessary hardware for installation
Image 1: The PROFLO PF9312FVPK Dual Flush Valve Assembly with its included trip lever and connecting hose.
4. 설정 및 설치
This dual flush valve assembly is designed for PROFLO PF9300 series dual flush tanks. Ensure your toilet tank is compatible before proceeding.
- 물 공급을 차단하세요: Locate the water supply valve behind the toilet and turn it clockwise until the water flow stops completely. Flush the toilet to empty the tank.
- Remove Old Flush Valve (if applicable): Disconnect the water supply line from the fill valve. Remove the old flush valve by unscrewing the mounting nut from underneath the tank. Clean the tank opening thoroughly.
- 새 플러시 밸브를 설치하세요: Place the new PROFLO PF9312FVPK Dual Flush Valve Assembly into the tank opening from the inside. Ensure the rubber gasket is properly seated. From underneath the tank, thread the mounting nut onto the flush valve and tighten it securely by hand. Do not overtighten.
- Connect Trip Lever: Attach the included trip lever to the designated connection point on the flush valve. Ensure the chain or cable from the trip lever is connected to the flush valve mechanism, allowing for proper activation of the dual flush feature. Adjust the chain/cable length to ensure both flush options operate correctly without excessive slack or tension.
- 수도 공급을 재개하세요: Reconnect the water supply line to the fill valve. Turn the water supply valve counter-clockwise to restore water flow to the toilet.
- 누출 확인: Allow the tank to fill. Inspect all connections for any signs of leaks. If leaks are present, turn off the water supply and re-tighten connections as needed.
5. 사용 설명서
The PROFLO PF9312FVPK Dual Flush Valve Assembly provides two flushing options to conserve water:
- 부분 물내림: For liquid waste, gently press and release the trip lever. This activates a reduced water volume flush.
- 전체 플러시: For solid waste, press and hold the trip lever down for a few seconds. This activates a full water volume flush.
Familiarize yourself with the feel of each flush option to optimize water usage.
6. 유지관리
Regular maintenance ensures optimal performance and longevity of your dual flush valve.
- 청소: Periodically inspect the flush valve for mineral buildup or debris. Turn off the water supply, drain the tank, and gently clean components with a soft brush and mild, non-abrasive cleaner. Avoid harsh chemicals that can damage rubber seals.
- 씰 검사: Check the rubber seals and gaskets for wear, cracks, or deterioration. Worn seals can lead to leaks and inefficient flushing. Replace any damaged seals promptly.
- 레버 조정: Ensure the trip lever operates smoothly and the chain/cable has the correct tension for both flush options. Adjust if necessary.
7. 문제 해결
일반적인 문제와 해결 방법은 다음 표를 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 변기 물이 계속 흘러나옴 | Flapper/seal not seating properly; fill valve issue; trip lever chain too tight. | Inspect flush valve seal for debris or wear. Adjust trip lever chain to ensure proper slack. Check fill valve for proper shut-off. |
| 약한 물내림 | Insufficient water level; partial blockage; flush valve not opening fully. | Adjust fill valve to increase water level. Check for obstructions in the bowl jets. Ensure trip lever chain allows full opening of the flush valve. |
| 변기 물이 안 내려가요 | Trip lever disconnected; flush valve mechanism jammed. | Reconnect trip lever chain/cable. Inspect flush valve for any obstructions preventing movement. |
| Leaks from tank base | 장착 너트가 헐거워졌고, 개스킷이 손상되었습니다. | Turn off water, drain tank, and tighten mounting nut. If leak persists, replace the flush valve gasket. |
If the problem persists after attempting these solutions, contact PROFLO customer support or a qualified plumber.
8. 사양
- 모델: PF9312FVPK
- 호환성: PROFLO PF9300 series dual flush tanks
- 품목 무게: 15.4 온스
- 제품 크기: 1 x 1 x 1 inches (Note: These dimensions may refer to packaging or a general placeholder. Actual product dimensions for installation may vary.)
- 제조업체: 프로필
9. 보증 및 지원
For warranty information or technical support, please refer to the official PROFLO web해당 사이트를 방문하거나 고객 서비스 부서에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.
PROFLO Customer Support: Visit the PROFLO Store on Amazon
