XPG Lancer Blade DDR5 6000MHz CL30 32GB 데스크탑 메모리 키트 사용 설명서

1. 서론

This manual provides essential information for the proper installation, configuration, and maintenance of your XPG Lancer Blade DDR5 6000MHz CL30 32GB (2x16GB) Desktop Memory Kit. Please read this guide thoroughly before proceeding with installation to ensure optimal performance and system stability.

Image 1.1: Two XPG Lancer Blade DDR5 RAM modules. These modules feature a sleek black heatsink design and are designed for high-performance desktop systems.

주요 특징:

• Compact Low-Profile Heatsink Design: Ensures compatibility with various CPU coolers and chassis configurations.
• PMIC for Power Supply Stability: Integrated Power Management IC (PMIC) enhances power delivery stability and efficiency.
• On-die ECC Error Correction: Improves data integrity and system reliability by detecting and correcting errors directly on the memory chip.
• 고품질 소재: Constructed with premium components for stable operation and enhanced overclocking potential.
• AMD EXPO Support: Compatible with the latest AMD platforms, allowing for easy one-click overclocking.
• Intel XMP 3.0 Support: Compatible with Intel platforms, enabling simplified overclocking through pre-defined profiles.

2. 설정 및 설치

Before installing the memory modules, ensure your computer is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

2.1 호환성 검사

Verify that your motherboard supports DDR5 memory and the specified speed (6000MHz). Consult your motherboard's manual or manufacturer's Qualified Vendor List (QVL) for compatibility information.

2.2 물리적 설치 단계

1. 시스템 준비: 컴퓨터 전원을 끄고 전원 케이블을 뽑은 다음 컴퓨터 케이스를 여세요.
2. DIMM 슬롯 찾기: Identify the DDR5 DIMM slots on your motherboard. For dual-channel configurations, refer to your motherboard manual for the correct slot placement (often slots 2 and 4, or 1 and 3).
3. 고정 클립을 엽니다. DIMM 슬롯의 양쪽 끝에 있는 고정 클립을 살짝 밀어서 엽니다.
4. 메모리 모듈 정렬: Hold the memory module by its edges, avoiding contact with the gold contacts. Align the notch on the memory module with the key in the DIMM slot. DDR5 modules have a specific notch placement to prevent incorrect insertion.

이미지 2.1: 상단 view of an XPG Lancer Blade DDR5 RAM module. Note the notch on the gold contacts for correct alignment with the motherboard slot.
5. 메모리 모듈 삽입: 모듈을 슬롯에 넣고 고정 클립이 제자리에 딸깍 소리가 날 때까지 양쪽 끝에 단단하고 고르게 압력을 가하십시오. 딸깍 소리가 나야 합니다.


Image 2.2: XPG Lancer Blade DDR5 memory modules correctly seated in a motherboard's DIMM slots. Ensure the retention clips are fully engaged.

6. 보안 설정 및 전원 켜기: 컴퓨터 케이스를 닫고 전원 케이블을 연결한 후 시스템의 전원을 켭니다.

3. 작동 및 구성

After physical installation, it is crucial to configure your memory in the system's BIOS/UEFI to achieve the advertised speeds and timings.

3.1 Enabling XMP (Intel) or EXPO (AMD)

XPG Lancer Blade DDR5 memory supports Intel XMP 3.0 and AMD EXPO profiles for easy overclocking. These profiles contain pre-configured settings for optimal performance.

1. BIOS/UEFI에 접속하세요: During system startup, repeatedly press the designated key (commonly DEL, F2, F10, or F12) to enter your motherboard's BIOS/UEFI settings. Consult your motherboard manual for the exact key.
2. 메모리 설정 위치를 찾으세요: Navigate to the memory or overclocking section. This is often found under "Advanced," "OC," or "Tweaker" menus.
3. Pro 활성화file:
   • For Intel platforms, look for "XMP Profile" or "Extreme Memory Profile" and select "Profile 1" or the highest available profile.
   

   Image 3.1: Intel XMP 3.0 technology. This feature allows for easy one-click overclocking of compatible memory modules on Intel platforms.

   • For AMD platforms, look for "EXPO Profile" or "AMD EXPO" and select "Profile 1" or the highest available profile.
   
   Image 3.2: AMD EXPO technology. This feature enables simplified overclocking of compatible memory modules on AMD platforms.
4. 저장 및 종료: 변경 사항을 저장하고 BIOS/UEFI를 종료하십시오. 새 메모리 설정이 적용된 상태로 시스템이 다시 시작됩니다.

Note: If your system fails to boot after enabling XMP/EXPO, clear your CMOS (refer to your motherboard manual) and try a lower profile or manual settings if comfortable.

4. 유지관리

DDR5 메모리 모듈은 일반적으로 유지 보수가 필요 없습니다. 하지만 다음 지침을 따르면 수명 연장과 최적의 성능을 유지하는 데 도움이 될 수 있습니다.

• 깨끗하게 유지하십시오: Periodically clean the interior of your computer case to prevent dust buildup on components, including memory modules. Use compressed air for this purpose.
• 적절한 공기 흐름: Ensure adequate airflow within your computer case to dissipate heat effectively. The low-profile heatsink on the XPG Lancer Blade is designed to assist with thermal management.


Image 4.1: XPG Lancer Blade DDR5 memory with a low-profile heatsink. This design ensures compatibility with various CPU coolers and improves thermal performance.

• 조심스럽게 다루십시오: 메모리 모듈을 다룰 때는 항상 가장자리를 잡고 금색 접점이나 집적 회로를 만지지 않도록 하십시오.

5. 문제 해결

If you encounter issues after installing your XPG Lancer Blade DDR5 memory, consider the following troubleshooting steps:

5.1 시스템 부팅 안 됨 / 화면 안 나타남

• 모듈 재장착: Power off and unplug your PC. Carefully remove and reinsert the memory modules, ensuring they are fully seated and the retention clips are locked.
• Check Slot Placement: Verify that the modules are installed in the correct DIMM slots according to your motherboard manual for dual-channel operation.
• 테스트 모듈 1: If you have multiple modules, try booting with only one module installed in the primary DIMM slot (usually indicated in your motherboard manual). If it boots, test each module individually to identify a faulty one.
• CMOS 지우기: If you enabled XMP/EXPO and the system failed to boot, clear your motherboard's CMOS settings. This will reset BIOS settings to default, allowing you to try configuring memory again.

5.2 Incorrect Memory Speed Detected

• Enable XMP/EXPO: Ensure that the XMP (for Intel) or EXPO (for AMD) profile is enabled in your motherboard's BIOS/UEFI settings as described in Section 3.1.
• BIOS 업데이트: An outdated motherboard BIOS/UEFI can sometimes cause compatibility or stability issues with new memory. Check your motherboard manufacturer's web최신 BIOS 버전 및 업데이트 지침은 해당 사이트를 참조하십시오.
• Check Motherboard QVL: Confirm that your specific memory kit model is listed on your motherboard's Qualified Vendor List (QVL) for guaranteed compatibility at advertised speeds.

5.3 시스템 불안정성/충돌

• 메모리 진단 실행: Use built-in Windows Memory Diagnostic Tool or third-party tools like MemTest86 to check for memory errors.
• 온도 확인: Ensure your system has adequate cooling and that memory modules are not overheating.
• 설정 조정: If overclocking manually, try slightly increasing 메모리 볼륨tage (within safe limits) or loosening timings. If using XMP/EXPO, ensure your CPU's Integrated Memory Controller (IMC) can handle the speed.

6. 사양

Detailed technical specifications for the XPG Lancer Blade DDR5 6000MHz CL30 32GB (2x16GB) Desktop Memory Kit (AX5U6000C3016G-DTLABBK):

7. 보증 및 지원

For warranty information and technical support, please refer to the official XPG website or contact XPG customer service directly. Keep your proof of purchase for warranty claims.

XPG Official Web대지: www.xpg.com