AdaLov CPE369 무선 브리지 키트 사용 설명서

1. 서론

This user manual provides detailed instructions for the installation, configuration, operation, and maintenance of the AdaLov CPE369 Wireless Bridge Kit. This kit includes three wireless bridges designed for outdoor network expansion, offering high-speed 5.8G wireless connectivity with a 1000Mbps LAN port and a 16dBi antenna for long-range transmission up to 3 kilometers.

The CPE369 kit supports Point-to-Point (PTP) and Point-to-Multipoint (PTMP) connections, making it ideal for extending networks, video surveillance, and internet sharing across various outdoor environments.

2. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

3 x CPE369 Wireless Bridges
3 x POE Adapters
3 x 금속 케이블 타이
3 x 네트워크 케이블
1 x 사용자 설명서

Contents of the AdaLov CPE369 Wireless Bridge Kit, showing three wireless bridges, three PoE adapters, three network cables, three metal cable ties, and a user manual.

Image: All components included in the CPE369 Wireless Bridge Kit.

3. 제품 오버view

The AdaLov CPE369 Wireless Bridge is an outdoor-rated device designed for robust and long-range wireless network extension. Each unit features a 16dBi high-gain directional antenna and supports 5.8GHz frequency for high-speed, low-latency data transmission.

3.1 주요 특징

장거리 전송: Up to 3KM (1.9 miles) with 16dBi directional antenna.
고속: 5.8GHz wireless with up to 900Mbps wireless transmission rate and 433Mbps LAN data rate.
듀얼 LAN 포트: Includes one 100Mbps and one 1000Mbps LAN port.
야외 내구성: IP65 waterproof and dustproof design, resistant to harsh weather conditions (sunlight, frost, rain, humidity, hail).
포 전원: Supports 24V POE power for flexible installation.
쉬운 페어링: One-key dialing pairing for Point-to-Point (PTP) and Point-to-Multipoint (PTMP) connections.
보안: Supports WEP64/128bits, WPA, WPA2, 802.1x.

3.2 구성 요소 식별

Diagram showing the components of the AdaLov CPE369 Wireless Bridge, including LAN ports, A-B button, Reset button, DC power, Digital Tube, WLAN Signal Light, and Power Indicator.

이미지: 상세 view of the CPE369 unit with labeled components.

Digital Tube: Displays current mode (Transmitter A Mode, Receiver B Mode) and pairing status.
재설정 버튼: Used for resetting the device or setting the same channel during pairing.
AB 버튼: Toggles between Master (A) and Slave (B) modes for pairing.
LAN (100Mbps) Port: 네트워크 연결을 위한 이더넷 포트.
LAN (1000Mbps) Port: Gigabit Ethernet port for high-speed network connection.
DC 전원 : 기기 전원 입력 단자입니다.
WLAN Signal Light: 무선 신호 강도를 나타냅니다.
전원 표시기: 전원 상태를 보여줍니다.

4. 설정 및 설치

4.1 안전 예방 조치

야외 설치 시에는 적절한 접지를 확보하세요.
장치를 열지 마십시오.asing; 자격을 갖춘 인력에게 서비스를 의뢰하세요.
Use only the provided POE adapters.
Mount the devices securely to prevent falling.

4.2 장치 장착

The CPE369 units can be installed on a pole or wall-mounted using the provided metal cable ties. Ensure the mounting location provides a clear line of sight between the master and slave bridges for optimal performance.

A person installing an AdaLov CPE369 Wireless Bridge on a wall outdoors.

이미지: 전ample of outdoor wall mounting for the CPE369.

4.3 Powering the Devices (POE)

Connect the provided POE adapters to power the CPE369 units. The POE adapter simplifies installation by delivering both power and data over a single Ethernet cable.

4.4 Dialing Pairing (Point-to-Multipoint Configuration)

The CPE369 kit supports easy one-key dialing pairing for Point-to-Multipoint (PTMP) connections. One unit acts as the Master Bridge (Transmitter A Mode), and the other two units act as Slave Bridges (Receiver B Mode).

Set Master Bridge: On one CPE369 unit, push the 'A-B' button to the 'A' position. The digital tube will display 'A'.
Set Slave Bridges: On the other two CPE369 units, push the 'A-B' button to the 'B' position. The digital tube on these units will display 'B'.
Set Same Channel: Press the 'Reset' button on all three bridges simultaneously. This will set them to the same channel for pairing.
페어링 성공: The devices will automatically pair. The WLAN signal lights will indicate successful connection and signal strength.

Four-step diagram illustrating the dialing pairing process for AdaLov CPE369 Wireless Bridges: setting master and slave modes, pressing reset, and successful pairing.

Image: Step-by-step guide for dialing pairing the CPE369 units.

Important Considerations for PTMP Setup:

The slave bridges must be in front of the master bridge.
The master bridge and slave bridges must be face-to-face.
마스터 브리지와 슬레이브 브리지 사이의 최대 각도는 60도를 초과해서는 안 됩니다.

Diagram showing optimal placement for Point-to-Multipoint connection with a master bridge and two slave bridges, emphasizing line of sight and a 60-degree angle limit.

Image: Guidelines for optimal placement in a Point-to-Multipoint setup.

5. Operation and Applications

5.1 Network Extension (PTMP)

The CPE369 kit is designed to extend your network wirelessly over long distances. The Master CPE connects to your main network (e.g., router, ALDS), and the Slave CPEs provide network access at remote locations.

Diagram illustrating a Point-to-Multipoint network extension setup, with a master CPE connected to a router and two slave CPEs providing network access to computers and phones.

Image: Network extension diagram using CPE369 in PTMP mode.

5.2 Video Surveillance Transmission

The high-speed and low-latency capabilities of the CPE369 make it ideal for transmitting video streams from security cameras to a central monitoring system (DVR/NVR).

Diagram showing a Point-to-Multipoint setup for video transmission, connecting security cameras via slave bridges to a master bridge, which then connects to a monitor, DVR, and switch.

Image: Video surveillance transmission setup with CPE369.

5.3 Starlink Network Extension

The CPE369 can be used to extend Starlink internet service to areas where the Starlink router cannot reach directly, by placing the master bridge near the Starlink dish and extending the network to remote locations.

Diagram illustrating Starlink internet extension using AdaLov wireless bridges, with a master bridge connected to the Starlink Ethernet adapter and slave bridges providing network access.

Image: Starlink network extension using CPE369.

5.4 General Applications

The CPE369 Wireless Bridge Kit is suitable for a wide range of outdoor applications, including:

Farm and barn network extension
Warehouse connectivity
Building-to-building network links
Garage network extension
Connecting CCTV cameras
Corporate WAN connections
Internet access for remote locations
Telecommunication masts

Collage of images showing various applications of the AdaLov wireless bridge, including farms, ports, security cameras, parking lots, warehouses, cities, construction sites, and skyscrapers.

Image: Diverse application scenarios for the CPE369.

6. 유지관리

The AdaLov CPE369 is designed for minimal maintenance due to its robust IP65 outdoor rating. However, periodic checks can ensure optimal performance and longevity.

물리적 검사: Periodically inspect the units for any physical damage, loose mounts, or cable wear.
시야 확보: Ensure that there are no new obstructions (e.g., growing trees, new buildings) blocking the line of sight between the bridges.
청소: If necessary, gently wipe the exterior of the units with a damp 먼지나 이물질을 제거할 때는 천을 사용하십시오. 독한 화학 약품이나 연마성 세척제를 사용하지 마십시오.
펌웨어 업데이트: 제조사 확인해보세요 website for any available firmware updates to ensure the device operates with the latest features and security enhancements.

An AdaLov CPE369 Wireless Bridge mounted outdoors in a snowy environment, illustrating its IP65 outdoor protection against heat, water, freezing, and dust.

Image: The CPE369's IP65 rating ensures durability in various weather conditions.

7. 문제 해결

문제	가능한 원인	해결책
전원 표시등 없음	No power supply; Faulty POE adapter or cable.	Check power connection to POE adapter. Ensure Ethernet cable from POE adapter to CPE is securely connected. Test with a different POE adapter or cable if available.
No Wireless Connection / Low Signal	Incorrect pairing; Obstruction in line of sight; Devices too far apart; Interference.	Re-perform the dialing pairing process (Section 4.4). Ensure clear line of sight between master and slave bridges. Verify devices are within the 3KM range. Check for strong interference sources (e.g., other 5.8GHz devices). Adjust the angle of slave bridges to be within 60 degrees of the master.
느린 네트워크 속도	Poor signal quality; Network congestion; Cable issues.	Check WLAN signal light for strong signal. Adjust alignment if needed. Ensure connected devices are using the 1000Mbps LAN port for high-speed connections. Verify network cables are Cat5e or Cat6 and in good condition.
Cannot Access Device Interface	Incorrect IP address; Network configuration issue.	Refer to the full user manual for default IP address and login details. Ensure your computer's IP address is in the same subnet as the device.

8. 기술 사양

특징	사양
모델	CPE369
상표	AdaLov
빈도	5.8GHz
안테나 이득	16 dBi Directional
무선 표준	802.11a, 802.11ac, 802.11n
Data Transfer Rate (Wireless)	최대 900Mbps
LAN Data Rate	최대 433Mbps
LAN 포트	1 x 100Mbps, 1 x 1000Mbps Ethernet
작업 거리	최대 3km (1.9마일)
전원 공급 장치	24V 전원 공급 장치
IP 등급	IP65 방수/방진
보안 프로토콜	WEP64/128bits, WPA, WPA2, 802.1x
운영 체제(내부)	라우터OS
제품 치수	9 x 6.3 x 24.5cm
품목 무게	1.97 kg (for the kit)

9. 보증 및 지원

For warranty information and technical support, please refer to the official AdaLov web해당 웹사이트를 방문하거나 고객 서비스 센터에 직접 문의하십시오. 제품에는 일반적으로 재료 및 제조상의 결함을 보증하는 표준 제조업체 보증이 제공됩니다.

제조업체: AdaLov

사업장 위치: Room 1702, Unit 2, Building 10, Jingyuan Shengshihuadu, Qingfeng Street Middle Road Zhoukou City Chuanhui District 466000 Henan Province China

보증 청구를 위해 구매 증명서를 보관하십시오.