소개
The AEG Jumpstarter JS15 is a versatile portable power station designed to provide emergency jump-starting for vehicles, act as a power bank for mobile devices, and offer illumination with its integrated LED lamp. This manual provides essential information for the safe and effective use of your device.
It is capable of delivering 400 A starting current and a peak current of 1500 A for 3 seconds, suitable for gasoline engines up to 4.0 L and diesel engines up to 2.0 L. The internal Li-ion battery has a capacity of 44.4 Wh (3 x 4000 mAh) and supports up to 1,000 charge cycles.
안전 지침
본 제품을 사용하기 전에 모든 안전 경고 및 사용 설명서를 읽으십시오. 경고 및 사용 설명서를 따르지 않을 경우 감전, 화재 및/또는 심각한 부상을 입을 수 있습니다.
- Do not expose the jump starter to rain or wet conditions. Water entering the device will increase the risk of electric shock.
- Do not use the jump starter if it is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
- 배터리 단락을 하지 마십시오amps. Ensure positive (+) and negative (-) clamps do not touch each other or the same metal object.
- 항상 빨간색(+) 단자를 연결하십시오.amp to the positive (+) terminal of the vehicle battery and the black (-) clamp to a metal part of the vehicle chassis away from the battery.
- Wear eye protection and protective clothing when working with vehicle batteries.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- 얼어붙은 배터리를 점프 시동하려고 시도하지 마십시오.
- Ensure the vehicle is in park (P) or neutral (N) and the parking brake is engaged before attempting to jump start.
- 차량 시동이 걸린 후 30초 이내에 점프 스타터를 차량 배터리에서 분리하십시오.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- AEG Jumpstarter JS15 unit
- Jump starter cables with clamps
- USB 충전 케이블
- 보관백
- 사용 설명서 (본 문서)
Image: The AEG Jumpstarter JS15 alongside its included storage bag, emphasizing portability and protection.
제품 끝view
Familiarize yourself with the components of the AEG Jumpstarter JS15.
Image: AEG Jumpstarter JS15 front view, highlighting 12V vehicle voltage, 400A starting current, and 1500A peak power (3s.
이미지: 클로즈업 view of the AEG Jumpstarter JS15, showing its compact form factor and integrated LED light.
Image: Detail of the AEG Jumpstarter JS15's battery connection ports, protected by a cover.
점프 스타터 충전
Before first use, fully charge the AEG Jumpstarter JS15. It takes approximately 6 to 9 hours to fully charge from empty when charging via USB with 2A.
- 제공된 USB 충전 케이블을 점프 스타터의 입력 포트에 연결합니다.
- Connect the other end of the USB cable to a suitable USB power source (e.g., car charger, wall adapter, computer USB port).
- The display will indicate the charging status. Ensure the device is fully charged before storing or using for jump-starting.
Image: AEG Jumpstarter JS15 being charged via USB, car, or wall socket, also featuring a 70 lumen LED light and including a storage bag.
Setup: Connecting to Vehicle for Jump Start
Follow these steps to safely connect the jump starter to a vehicle battery:
- 점프 스타터가 완전히 충전되었는지 확인하세요.
- 차량의 시동을 끄고 모든 부속 장치(조명, 라디오 등)를 끄십시오.
- 연결하다 빨간색 (+) 클amp 에게 긍정적인 (+) terminal of the vehicle's battery.
- 연결하다 검은색 (-) 클amp to a solid, unpainted metal part of the vehicle's chassis, away from the battery and fuel lines. Do not connect it directly to the negative terminal of the battery unless specified by the vehicle manufacturer.
- 두 cl을 모두 확인하십시오.amps have a secure connection.
Image: AEG Jumpstarter JS15 showing direct battery connection clamps, suitable for gasoline engines up to 4.0L and diesel engines up to 2.0L.
Operating: Jump Starting a Vehicle
Once the jump starter is correctly connected to the vehicle battery:
- Turn on the AEG Jumpstarter JS15. The display will show the battery status.
- Attempt to start the vehicle's engine. If the vehicle does not start immediately, wait at least 30 seconds before trying again. Do not crank the engine for more than 3 seconds per attempt.
- 차량이 시동되면 즉시 분리하십시오. 검은색 (-) 클amp from the vehicle chassis, then disconnect the 빨간색 (+) 클amp 차량 배터리에서.
- Allow the vehicle's engine to run for a few minutes to recharge its battery.
The AEG Jumpstarter JS15 is compatible with 12V vehicle systems.
Image: AEG Jumpstarter JS15 used in various vehicle types including cars, vans, motorcycles, quads, boats, and scooters.
Using as a Power Bank (USB & Wireless Charging)
The AEG Jumpstarter JS15 can also charge your mobile devices.
USB 충전:
- 기기의 USB 충전 케이블을 점프 스타터의 USB 출력 포트에 연결하세요.
- 점프 스타터가 자동으로 기기 충전을 시작합니다.
무선 충전:
- Place your Qi-compatible smartphone or other device on the wireless charging pad located on the top surface of the jump starter.
- Ensure the device is centered on the pad for optimal charging. The jump starter provides up to 10W wireless charging.
Image: AEG Jumpstarter JS15 functioning as a power bank, charging a smartphone and camera, highlighting 44.4 Wh battery capacity, USB and wireless charging up to 10W, and Li-ion battery with up to 1,000 charge cycles.
LED L 사용하기amp
통합 LED lamp provides 70 lumens of illumination for various situations.
- LED를 켜려면 lamp, press the dedicated light button (refer to product overview 위치).
- Press the button again to cycle through different light modes (e.g., steady on, strobe, SOS, if available) or to turn it off.
Image: The bright 70 lumen LED lamp of the AEG Jumpstarter JS15 illuminated.
유지
적절한 유지 관리는 점프 스타터의 수명과 성능을 보장합니다.
- 충전 중: Recharge the jump starter every 3-6 months, even if not used, to maintain battery health. Store it with at least 50% charge.
- 청소: 마른 부드러운 천으로 제품을 닦으십시오. 독한 화학 약품이나 연마성 세척제를 사용하지 마십시오.
- 저장: Store the jump starter in its protective bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- 배터리 수명: The high-quality lithium-ion battery is designed for up to 1,000 charge cycles.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 점프 스타터가 켜지지 않습니다. | 배터리가 완전히 방전되었습니다. | 점프 스타터를 완전히 충전하세요. |
| 차량이 시동되지 않습니다. | Incorrect connection; vehicle battery too deeply discharged; vehicle issue not related to battery. | 확인 CLamp connections (positive to positive, negative to chassis). Ensure jump starter is fully charged. Consult a mechanic if the issue persists. |
| 무선 충전이 작동하지 않습니다. | Device not Qi-compatible; device not properly aligned; jump starter battery low. | Ensure your device supports Qi wireless charging. Reposition the device on the charging pad. Charge the jump starter. |
| LED 엘amp 작동하지 않습니다. | Jump starter battery low; lamp 부조. | Charge the jump starter. If the problem persists, contact customer support. |
명세서
| 특징 | 값 |
|---|---|
| 모델 | JS15 |
| 제조업체 부품 번호 | 10736 |
| 배터리 유형 | 리튬이온 |
| 배터리 용량 | 44.4 Wh (3 x 4000 mAh) |
| 시작 전류 | 400아 |
| 피크 전류 | 1500 A (for 3 seconds) |
| 출력 볼륨tage | 12V(XNUMXV) |
| 엔진 호환성 (가솔린) | 최대 4.0L |
| 엔진 호환성(디젤) | 최대 2.0L |
| USB 출력 | Available (for charging mobile devices) |
| 무선 충전 출력 | 최대 10W |
| LED 엘amp 명도 | 70루멘 |
| Charging Time (via USB 2A) | 6-9시간 |
| 치수(길이 x 너비 x 높이) | 190 x 85 x 28.5mm |
| 무게 | 523g |
Image: AEG Jumpstarter JS15 dimensions (190 x 85 x 28.5 mm) and weight (523g), demonstrating its compact and portable design.
보증 및 지원
For warranty information and customer support, please refer to the official AEG web사이트를 방문하거나 판매점에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.
제조업체: AEG
모델 번호: 10736
ASIN: B0CC9N2FQQ