레즈너 UDXC-150

레즈너 UDXC-150 천연가스 유닛 히터: 설치 및 작동 설명서

모델: UDXC-150 | 브랜드: 레즈너

1. 서론

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Reznor UDXC-150 Natural Gas Unit Heater. Please read all instructions carefully before attempting to install or operate the unit. Retain this manual for future reference.

앞쪽 view of the Reznor UDXC-150 Natural Gas Unit Heater.

그림 1: 전면 view of the Reznor UDXC-150 Natural Gas Unit Heater. This image displays the front and side view of the Reznor UDXC-150 Natural Gas Unit Heater, showcasing its compact design and air outlet.

2. 안전 정보

경고: 부적절한 설치, 조정, 변경, 서비스 또는 유지보수는 재산 피해, 부상 또는 사망을 초래할 수 있습니다. 이 장비를 설치하거나 서비스하기 전에 설치, 작동 및 유지보수 지침을 철저히 읽으십시오.

  • Ensure all local codes and ordinances are followed during installation.
  • 설치 및 서비스는 자격을 갖춘 설치자, 서비스 기관 또는 가스 공급업체를 통해 수행되어야 합니다.
  • 이 기기나 다른 기기 근처에서 가솔린이나 기타 가연성 증기 및 액체를 보관하거나 사용하지 마십시오.
  • 이 장치는 실내에서만 사용하도록 설계되었습니다.

3. 설정 및 설치

The Reznor UDXC-150 unit heater is designed for versatile installation in commercial or industrial spaces. Proper setup is crucial for safe and efficient operation.

3.1 장착

The UDXC-150 is equipped with threaded-nut retainers at four suspension points, allowing for ceiling or wall mounting. Mounting brackets and hardware are sold separately and must be appropriate for the unit's weight and the structural integrity of the mounting surface.

Reznor UDXC-150 Unit Heater mounted on a ceiling, with a list of standard features.

Figure 2: Ceiling-mounted Reznor UDXC-150 Unit Heater. The heater is shown installed on a ceiling, illustrating its suspension points. Accompanying text lists features such as Status-Indicating LED Light, 7-Segment Display Board for troubleshooting, 2- and 4-Point Suspension Options, External Gas Connection, and ETL Approval.

3.2 배출

This unit is compatible with category 1 double wall B-vent pipe. Venting can be configured vertically out of a roof or horizontally through a sidewall. Consult local codes for specific venting requirements.

3.3 가스 연결

An external gas connection point is provided for ease of maintenance and installation. Ensure all gas connections are leak-free and comply with local regulations. This unit operates on Natural Gas.

3.4 전기 배선

The unit features an external terminal strip for 24V wiring. All electrical work must be performed by a qualified electrician and adhere to all applicable electrical codes.

Image showing a worker installing a Reznor unit heater, with text about compact and durable heating.

Figure 3: Installation of the Reznor UDXC-150 Heater. A worker is shown connecting ductwork to a ceiling-mounted heater. The text emphasizes the unit's suitability for commercial/industrial spaces, corrosion-resistant materials, and quiet, efficient heating.

4. 사용 설명서

The Reznor UDXC-150 is designed for efficient and quiet heating.

4.1 초기 시작

  1. Ensure all gas and electrical connections are secure and verified by a professional.
  2. 장치에 가스 공급 장치를 켜십시오.
  3. 장치에 전력을 복구합니다.
  4. Set the thermostat to the desired temperature. The unit will initiate its ignition sequence.

4.2 정상 작동

  • The unit features a single-burner design with two BTU outputs, allowing for efficient heating in varying conditions.
  • An integrated circuit board with a display and a status-indicating LED provides operational feedback.
  • The low static pressure axial fan and power venting system ensure effective air circulation and minimize heat loss.
  • The unit operates with low noise due to vibration-isolated fan and venter motors.
Graphic detailing standard features of the Reznor UDXC-150 Unit Heater.

Figure 4: Key Features of the Reznor UDXC-150 Unit Heater. This graphic highlights key features including 83% AFUE Efficiency, TCORE2 Titanium-Stabilized Aluminized Steel Heat Exchanger, Multi-Try Direct Spark Ignition, and Low Noise Operation.

5. 유지관리

Regular maintenance ensures the longevity and optimal performance of your Reznor UDXC-150 unit heater. All maintenance should be performed by qualified personnel.

5.1 정기 점검(월별/분기별)

  • Inspect the heat exchanger for any signs of corrosion or damage. The TCORE2 titanium-stabilized aluminized steel heat exchanger is designed for durability.
  • Check the fan and motor for unusual noises or vibrations.
  • 공기 흡입구와 배출구가 막히지 않았는지 확인하십시오.
  • Verify that the external gas connection is secure and free of leaks.

5.2 연간 정기 점검

  • A qualified technician should perform a comprehensive inspection and cleaning of the burner, heat exchanger, and ignition system.
  • The updated cabinet structure with a removable front face and hinged access door panel with a quarter-turn latch facilitate easier access for servicing.
  • Check and calibrate gas pressure as needed.
  • Inspect all electrical connections and wiring.

6. 문제 해결

The UDXC-150 unit heater includes features to assist with troubleshooting common issues.

문제가능한 원인해결책
히터에 불이 붙지 않습니다No gas supply, electrical issue, ignition faultCheck gas valve, power supply. Consult 7-segment display for error codes.
Unit runs but no heatGas supply interrupted, burner issueVerify gas flow. Check burner for obstructions.
작동 중 이상한 소음이 발생합니다.Fan imbalance, motor issue, loose componentsInspect fan and motor. Tighten any loose parts. If persistent, contact service.
Status LED indicates an errorSpecific fault detected by the control boardRefer to the 7-segment display board for specific error codes and consult the full service manual for detailed troubleshooting steps.

For complex issues or if the problem persists, contact a qualified service technician.

7. 사양

특징세부 사항
모델 번호UDXC-150
열 출력150,000 영국 열량 단위(BTU)
연료 유형천연가스
열 효율83%
제품 크기(D x W x H)48.44인치 x 38.19인치 x 20.13인치
장착 유형Ceiling Mount, Wall Mount (brackets sold separately)
객실 유형Garage, Warehouse, Commercial/Industrial Spaces
특별 기능Energy Efficient, Fast Heating, Low Noise Operation, TCORE2 Titanium-Stabilized Aluminized Steel Heat Exchanger, 7-Segment Display Board
속도의 수2
Diagram showing the dimensions of the Reznor UDXC-150 Unit Heater.

Figure 5: Dimensions of the Reznor UDXC-150 Unit Heater. This image provides the physical dimensions of the 150,000 BTU unit, including its width, depth, and height, essential for installation planning.

8. 제품 비디오

제공된 데이터에는 이 설명서에 삽입할 수 있는 판매자의 공식 제품 비디오가 없습니다.

9. 보증 정보

Specific warranty details for the Reznor UDXC-150 unit heater are typically provided at the point of purchase or included with the product packaging. Please refer to the warranty card or contact the seller (1HVAC) or Reznor directly for comprehensive warranty terms and conditions.

10. 지원 및 연락처

For technical assistance, parts, or service inquiries, please contact the seller or an authorized Reznor service provider. Ensure you have your model number (UDXC-150) and serial number available when contacting support.

Seller: 1HVAC

추가 정보는 다음을 방문하세요. 1HVAC Store on Amazon.

Two Reznor unit heaters, one with a fan visible, and text about product condition and packaging.

Figure 6: Product Condition and Packaging. This image shows two unit heaters, one from the front and one from the side revealing the fan. Text describes the careful handling in the 1HVAC warehouse and expert packaging to ensure product integrity during transit.

관련 문서 - UDXC-150

사전view 레즈너 가스 변환 키트를 이용한 가스식 유닛 히터 설치
본 문서에서는 UBX, UBXC, UBZ, UDX, UDXC, UDZ, UDAP, UDAS, UDBP, UDBS를 포함한 다양한 가스식 유닛 히터 모델용 Reznor 가스 변환 키트 설치 지침을 제공합니다. 천연가스와 프로판 가스 간 변환 및 고지대 설치를 위한 구성 요소 선택, 안전 예방 조치, 설치 단계를 자세히 설명합니다.
사전view 전기 및 가스 히터용 Reznor 천장 서스펜션 키트 설치 가이드
EHU 전기 히터 및 UDXC, UDX, UDZ 가스 히터와 호환되는 Reznor CK22 천장 서스펜션 키트의 설치 지침 및 구성품 세부 정보입니다. Reznor 히터를 안전하게 설치하는 방법을 알아보세요.
사전view Reznor 릴레이 키트 다중 장치 제어용 설치 가이드(CL31/CL32)
Reznor CL31 및 CL32 릴레이 키트의 종합 설치 가이드로, 다양한 Reznor 전기 및 가스 히터의 다중 장치 제어를 가능하게 합니다. 구성품 목록, 자세한 설치 단계 및 배선 사양이 포함되어 있습니다.
사전view 가스 연소 유닛 히터용 Reznor 수직 루버 키트 설치 가이드(OPT-CD1)
가스 연소식 유닛 히터(UBX, UBXC, UBZ, UDX, UDXC, UDZ, UEZ 모델)용으로 설계된 Reznor OPT-CD1 수직 루버 키트 설치 설명서입니다. 구성품 목록과 단계별 조립 가이드가 포함되어 있습니다.
사전view Reznor UBXC/UDXC 가스 연소 유닛 히터 교체 부품 설명서
이 설명서는 Reznor UBXC 및 UDXC 시리즈 가스 연소 유닛 히터의 자세한 교체 부품 정보를 제공합니다. 일련번호 디코딩, 전기 부품, 팬 및 모터 어셈블리, 송풍기 어셈블리, 캐비닛 부품, 열교환기 및 버너 어셈블리, 환풍기 및 연도 래퍼 부품, 그리고 다양한 액세서리 및 옵션에 대한 내용이 포함되어 있습니다.
사전view Reznor Heat Exchanger Gasket Kit Installation Guide for Gas-Fired Unit Heaters
Detailed installation instructions for Reznor heat exchanger gasket kits for UBX, UBXC, UBZ, UDX, UDXC, and UDZ gas-fired unit heaters. Includes kit components, sizes, and step-by-step installation procedures.