1. 서론
This manual provides instructions for the assembly, operation, and maintenance of your Okin Dual Motor 3-Stage Electric Standing Desk Frame. This product is designed to provide an adjustable height base for your chosen desktop. Please note that this package includes the desk frame only; a desktop surface is not included and must be acquired separately.
The frame is compatible with tabletops ranging from 47.2 inches to 78.7 inches in length, 23.6 inches to 33.5 inches in width, and a suggested thickness of 0.7 inches to 1.2 inches.
2. 안전 정보
- 중량 제한: Do not exceed the maximum weight capacity of 270 lbs (122 kg) on the desk frame. Exceeding this limit can cause damage to the frame and potential injury.
- Anti-collision Function: The desk frame includes an anti-collision feature. For this function to operate correctly, the control box must be fixed horizontally during and after installation. If the control box is not horizontal, the desk may not move up or down as intended.
- 집회: Follow all assembly instructions carefully. Use caution when handling heavy components to prevent injury.
- 전원: Ensure the power supply meets the product's specifications. Do not use damaged power cords or plugs.
- 어린이와 애완동물: 사고를 예방하기 위해 작동 중에는 어린이와 애완동물이 책상에 접근하지 못하도록 하세요.
3. 패키지 내용
조립을 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Desk Frame Components (legs, crossbars, feet)
- 듀얼 모터 시스템
- 제어 상자
- 핸드셋 컨트롤러
- 전원 케이블
- Assembly Hardware (screws, wrenches, cable clips)
- 사용 설명서
4. 설치 및 조립
Follow these steps to assemble your electric standing desk frame. It is recommended to have two people for assembly due to the weight of the components.
- 구성 요소 풀기: 모든 부품을 포장에서 조심스럽게 꺼내 깨끗하고 평평한 표면에 펼쳐 놓으세요. 포장 내용물 목록을 확인하세요.
- Assemble Legs and Crossbars: Attach the lifting columns to the feet. Connect the crossbars to the lifting columns. The frame width is adjustable from 46.5 inches to 74 inches to accommodate various desktop sizes. Adjust the crossbars to match the length of your chosen desktop.
Figure 1: Adjustable Length Retractable Base and Recommended Tabletop Sizes
- 제어 박스와 모터를 설치하세요: Securely mount the control box to the frame, ensuring it is perfectly horizontal for proper anti-collision function. Connect the dual motors to the control box.
Figure 2: Heavy-Duty Desk Frame Construction with Dual Motor System
- Attach Handset Controller: Mount the handset controller to the underside of your desktop or a convenient location on the frame. Connect it to the control box.
- 데스크톱 첨부: Carefully place your chosen desktop onto the assembled frame. Secure the desktop to the frame using appropriate screws (not included, as desktop types vary). Ensure the desktop is centered and stable.
- 발 패드 조정: The desk features adjustable feet pads to protect your floor and ensure stability on uneven surfaces. Adjust them as needed to level the desk.
Figure 3: Adjustable Feet Pad for Stability
- 케이블 관리 : Use the provided adhesive cable clips to organize and secure all cables, preventing them from snagging or interfering with desk movement.
5. 사용 설명서
The Okin Electric Standing Desk Frame features a smart controller for easy height adjustment.
5.1 Handset Controller Functions
Figure 4: Smart Controller Handset
- 위/아래 버튼(▲ / ▼): Press and hold to raise or lower the desk to your desired height. The desk moves at approximately 1.4 inches per second.
- LED 디지털 디스플레이: 책상의 현재 높이를 인치 단위로 표시합니다.
- 메모리 버튼(1, 2, 3): 이 버튼들을 사용하면 선호하는 높이 설정을 최대 세 개까지 저장하고 불러올 수 있습니다.
- 설정 버튼(M): Used to save a custom height to a memory preset.
5.2 메모리 사전 설정
- 위/아래 버튼을 사용하여 책상 높이를 원하는 대로 조절하세요.
- Press the 'M' (Setting) button. The LED display will show 'S-'.
- Within 3 seconds, press one of the memory buttons (1, 2, or 3). The current height will be saved to that button.
- 저장된 높이를 불러오려면 해당 메모리 버튼(1, 2, 3)을 누르세요. 책상이 자동으로 저장된 위치로 이동합니다.
5.3 충돌 방지 기능
The anti-collision function uses a gyroscope to detect changes in the desk's angle, indicating an obstruction. If an obstruction is detected during movement, the desk will automatically reverse direction slightly to prevent damage.
- 활성화/비활성화: A small button on the side of the handset part controls the anti-collision function. Press this button to toggle the function on or off.
- 중요한: Ensure the control box is fixed horizontally during installation for this function to work correctly.
Figure 5: Anti-Collision Function in Action
6. 유지관리
- 청소: 부드러운 천으로 책상 프레임을 닦으세요.amp 천으로 닦으세요. 마감재를 손상시킬 수 있는 강한 화학 물질이나 연마성 세제는 사용하지 마세요.
- 정기 점검: 모든 나사와 연결부가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
- 케이블 검사: Inspect power cables and motor connections for any signs of wear or damage. Replace immediately if damage is found.
7. 문제 해결
If you encounter issues with your desk frame, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 책상이 움직이지 않습니다. | Power cable disconnected; Control box not horizontal; Overload. | Check power connections; Ensure control box is horizontal; Reduce weight on desk. |
| 책상이 고르지 않게 움직이거나 이상한 소리가 납니다. | 연결 부위가 헐거움; 장애물; 불균형한 무게 분산. | Check all connections; Remove any obstructions; Distribute weight evenly. |
| Anti-collision function not working. | Control box not horizontal; Function deactivated. | Ensure control box is fixed horizontally; Activate function via handset button. |
| LED 디스플레이에 오류 코드가 표시됩니다. | 특정 시스템 오류. | Refer to the full troubleshooting guide (if available) or contact customer support. Often, a power cycle (unplug and replug) can resolve temporary errors. |
이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하세요.
8. 사양
| 특징 | 사양 |
|---|---|
| 상표 | 오킨 |
| 모델 | 듀얼 모터 3Stage Electric Standing Desk Frame |
| 높이 조절 범위 | 23.7인치 - 49.3인치(60.2cm - 125.2cm) |
| 너비 조절 범위 | 46.5인치 - 74인치(118.1cm - 188cm) |
| 권장 테이블탑 길이 | 47.2인치 - 78.7인치(119.9cm - 199.9cm) |
| 권장 테이블탑 너비 | 23.6인치 - 33.5인치(59.9cm - 85.1cm) |
| Recommended Tabletop Thickness | 0.7인치 - 1.2인치(1.8cm - 3cm) |
| 최대 중량 용량 | 270파운드(122kg) |
| 리프팅 속도 | 1.4" per second (3.5 cm/s) |
| 모터 유형 | 듀얼 모터 |
| 다리 Stages | 3-Tier |
| 재료 | 합금강 |
| 색상 | 하얀색 |
| 특별 기능 | Anti-collision function, 3 memory presets |
9. 보증 정보
Okin products are manufactured with quality and durability in mind. This product is covered by a limited warranty against manufacturing defects. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation included with your purchase or contact Okin customer support.
10. 고객 지원
If you have any questions, require assistance with assembly, or need troubleshooting support that is not covered in this manual, please contact Okin customer service. You can typically find contact information on the product packaging, the official Okin web사이트나 소매업체를 통해 구매할 수 있습니다.
For the latest information and support, visit the Okin store on Amazon: 옥인스토어
