1. 소개 및 이상view
The RENOGY 24V Hybrid Solar Inverter is an advanced all-in-one unit designed to integrate solar energy storage, battery charging, and pure sine wave AC output. This system is engineered for efficiency and reliability, providing stable power for a wide range of applications.
Key features include high-efficiency MPPT technology for optimal solar energy harvesting, multiple charging and output modes to suit diverse requirements, and comprehensive electronic protection for enhanced system safety and stability. It is suitable for powering home appliances, power tools, industrial equipment, and sensitive electronic devices.
2. 제품 특징
- Hybrid Power System: Integrates a 40A MPPT solar charge controller, a 2500W pure sine wave inverter, and a 40A battery charger.
- 순수 사인파 출력: Provides 2500W continuous DC to AC power with a 5000W peak surge capability, ensuring stable and clean power comparable to grid quality.
- 무정전 전원 공급 장치(UPS) 기능: Features a rapid 10ms transfer time to battery power during outages, preventing interruptions for connected devices.
- 고급 MPPT 기술: Utilizes an innovative MPPT algorithm with 99.9% efficiency to maximize solar energy capture.
- 종합 보호: Includes safeguards against low/over voltage, over temperature, overload, and short circuits, indicated by LED lights.
- 열 관리: Equipped with a high-speed ventilation fan for efficient cooling and Ground Fault Circuit Interrupter (GFCI) protection.
- 유연한 주파수: Supports switchable 50/60Hz operation.
- 견고한 구조: 내구성이 뛰어난 금속 케이스에 담겨 있습니다.asing to protect against impacts.
3. 제품 구성 요소 및 크기
그림 3.1: 전면 view of the RENOGY 24V Hybrid Inverter, showing its dimensions (378mm H x 280mm W x 103mm D) and key specifications like 2500-3000W pure sine wave output, 60A MPPT solar charge controller, and 100A hybrid maximum charge current.
그림 3.2: 상세 view of the inverter's ports and indicators. Key components include (1) AC Input Port, (2) AC Output Port, (3) USB Communication Port, (4) RS485 Communication Port, (5) Dry Node Port, (6) Grounding Screw Hole, (7) AC Input Overload Protection Device, (8) Cooling Fan, (9) Battery Port, (10) On/Off Switch, (11) PV Port, (12) Touch Buttons, (13) LED Indicators, and (14) LCD Screen.
4. 설정 및 설치
4.1 안전 예방 조치
- 모든 연결이 안전하고 올바르게 극성이 설정되어 있는지 확인하세요.
- 인버터는 통풍이 잘 되는 곳에 설치하고, 가연성 물질과 직사광선을 피하세요.
- Always disconnect power sources before performing any wiring or maintenance.
- Consult a qualified electrician for installation if you are unsure.
4.2 배선도
그림 4.1: 예ample wiring diagram showing connections between solar panels, the hybrid solar inverter, a 24V battery, and household loads. Ensure all connections follow local electrical codes and safety standards.
4.3 배터리 호환성
The inverter is compatible with various deep cycle battery types. Refer to the settings menu to select the appropriate battery type for optimal charging and discharge performance.
Figure 4.2: The inverter supports multiple battery types, including Flooded (FLD), Gel (GEL), Lithium Iron Phosphate (LI), Lithium-ion (LI), Sealed Lead-Acid (SLD), and User-Defined (USER) battery settings.
4.4 시스템 통합
Figure 4.3: A complete system setup illustrating how the inverter integrates solar panels, a 24V battery, AC power/generator input, and various household loads (e.g., refrigerator, lights, fan, TV).
5. 작동 모드
The inverter offers flexible operation with four charging modes and three load output modes, allowing customization to specific application needs.
5.1 충전 모드
- PV 우선순위: Solar power is the primary source for charging.
- AC Priority: Utility grid power is the primary source for charging (solar is secondary).
- 하이브리드 충전: Utilizes both solar and AC power for charging.
- PV Only Charging: 충전에는 태양광 발전만 사용됩니다.
5.2 부하 출력 모드
- 인버터 모드: Power is supplied from the inverter (battery).
- PV Priority Output: Solar power is the primary source for loads.
- AC Priority Output: Utility grid power is the primary source for loads.
Figure 5.1: Diagram illustrating the four charging modes (PV Priority, AC Priority, Hybrid Charging, PV Only Charging) and three load output modes (PV Priority, AC Priority, Inverter Mode).
5.3 LCD 디스플레이 및 표시기
The LCD screen and intelligent LED indicators provide real-time system information, allowing users to monitor input/output data, identify potential issues, and visualize system utilization.
Figure 5.2: The LCD screen displays critical system parameters such as input/output voltage, current, and load percentage. LED indicators provide quick status updates for AC input, charging, and fault conditions.
6. 유지관리
- 정기 검사: 모든 배선 연결부의 견고성과 부식 여부를 주기적으로 점검하세요.
- 청소: Keep the inverter's ventilation openings clear of dust and debris to ensure proper airflow for cooling. Use a dry cloth for cleaning the exterior.
- 배터리 상태: 배터리 용량 모니터링tage and charge status regularly, especially for lead-acid batteries, to ensure optimal performance and longevity.
- 펌웨어 업데이트: 제조사 확인해보세요 website for any available firmware updates to ensure the inverter operates with the latest features and improvements.
- 환경 조건: 인버터가 지정된 온도 및 습도 범위 내에서 작동하는지 확인하세요.
7. 문제 해결
This section provides guidance for common issues. For more complex problems, contact RENOGY customer support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 인버터가 켜지지 않습니다 | 배터리가 연결되지 않았거나 배터리 전압이 낮습니다.tage. Main switch off. | 배터리 연결 및 용량 확인tage. Ensure the ON/OFF switch is in the 'ON' position. |
| AC 출력 없음 | Overload, short circuit, or over-temperature. Output breaker tripped. | Reduce load. Check for short circuits. Allow inverter to cool. Reset output breaker. |
| 배터리가 충전되지 않음 | PV input issue, AC input issue, or incorrect charging mode. | 태양광 패널 연결 상태와 전압을 확인하십시오.tage. Verify AC input. Select appropriate charging mode. |
| 팬 소음이 크다 | High load or high ambient temperature. | This is normal operation under high load or temperature. Ensure adequate ventilation. |
| UPS function not working | AC input not detected or battery issue. | Verify AC input connection. Check battery health and connections. |
8. 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | RENOGY 24V |
| 입력 Voltage | 24볼트 직류 |
| 출력 전력(연속) | 2500W(순수 사인파) |
| 출력 전력(피크) | 5000와트 |
| MPPT 태양광 충전 컨트롤러 | 60A |
| 배터리 충전기 전류 | 40A |
| 능률 | 92% (DC to AC conversion) |
| UPS 전송 시간 | 약 10ms |
| 빈도 | 50/60Hz (Switchable) |
| 인증 | ETL 인증 |
| 치수(높이 x 너비 x 깊이) | 378mm x 280mm x 103mm(대략) |
9. 보증 및 지원
9.1 보증 정보
The RENOGY 24V Hybrid Inverter comes with a 1년 보증 covering materials and workmanship. Please retain your proof of purchase for warranty claims.
9.2 고객 지원
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact RENOGY customer support through their official website or the retailer where the product was purchased. Provide your product model number and purchase date for faster service.
