소개
This manual provides comprehensive instructions for the safe and effective use of your LAND 100FT/30M Fiberglass Tape Measure. Please read this manual thoroughly before operation and retain it for future reference. This tape measure is designed for accurate linear measurements in various applications, including construction, surveying, and landscaping.
제품 특징
- Dual-Sided Scale: Measures up to 100 feet (30 meters) with both imperial (feet/inches) and metric (meters/centimeters) markings.
- Fiberglass Tape: Constructed from PVC fiberglass for reliable strength, flexibility, and resistance to stretching or fracturing.
- Double-Throat Rollers: Designed to guide the tape blade during retraction and prevent twisting.
- Quick Recovery Mechanism: Features a differential gear for efficient tape retraction via the crank handle.
- 내구성이 뛰어난 Casing: Made with well-chosen ABS plastic and protective TPR material for sturdiness, durability, and heat resistance.
설정
The LAND Fiberglass Tape Measure is ready for use directly out of the packaging. No assembly is required.
- 짐 풀기: 줄자를 포장에서 조심스럽게 꺼내세요.
- 초기 검사: Inspect the tape measure for any visible damage. Ensure the tape extends and retracts smoothly.
그림 1: 전면 view of the LAND Fiberglass Tape Measure, showing its yellow and black casing with the tape partially extended.
작동 지침
Follow these steps for accurate and efficient measurement:
- Extending the Tape:
Grasp the metal ring at the end of the tape. Pull the tape firmly from the casing to the desired length. The tape will extend smoothly.
Figure 2: A person using the tape measure to measure the length of a wooden furniture piece, showing the tape extended along the surface.
- 측정값 읽기:
The tape features a dual-sided scale. One side displays measurements in feet and inches, while the other displays in meters and centimeters. Read the measurement at the desired point on the tape.
그림 3: 자세한 view of the tape blade, illustrating the dual-sided markings for both imperial (feet/inches) and metric (meters/centimeters) measurements.
Note on Zero Point: The starting point for measurement (zero calibration) is at the outer edge of the metal ring. Ensure the ring is flush against the starting surface for accurate readings.
Figure 4: An image comparing the zero calibration point of the LAND tape measure (at the outer edge of the metal ring) with a common tape measure.
- Retracting the Tape:
Turn the crank handle clockwise to retract the tape into the casing. The differential gear system facilitates quick and smooth retraction. Ensure the tape is guided back into the casing without twisting, utilizing the double-throat rollers.
유지
적절한 유지 관리는 줄자의 수명과 정확성을 보장합니다.
- 청소: Wipe the tape blade with a dry or slightly damp cloth after use, especially if it has been exposed to dirt or moisture. Avoid harsh chemicals.
- 저장: 줄자는 직사광선과 극한 온도 변화를 피해 깨끗하고 건조한 곳에 보관하십시오.
- 점검: Periodically check the tape for any signs of wear, tears, or damage. Ensure the retraction mechanism operates smoothly.
- 윤활(선택 사항): If the retraction mechanism becomes stiff over time, a small amount of silicone-based lubricant can be applied to the gears, if accessible, to restore smooth operation. Refer to the troubleshooting section for guidance.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Tape does not retract smoothly. | Dirt or debris in the casing; tape twisting; lack of lubrication. |
|
| Tape is stuck or jammed. | Severe twisting or foreign object obstruction. |
|
| 부정확한 측정. | Incorrect zero point usage; tape damage. |
|
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 땅 |
| 모델 번호 | LD |
| Measurement Length | 100피트(30미터) |
| 스케일 유형 | Dual-Inch/Metric |
| 테이프 재질 | PVC Fiberglass |
| Casing 재료 | ABS Plastic, TPR Material |
| 제품 치수 | 7"L x 6"W (7 x 6 x 0.1 inches) |
| 품목 무게 | 1 파운드 |
| 측정 정확도 | 1/8 inch or 2mm |
| 색상 | 검정, 노랑 |
보증 및 지원
If our product has any quality problems, please feel free to contact us via Amazon. We are committed to providing satisfactory after-sales service.
추가 지원이나 문의 사항이 있는 경우 LAND Store on Amazon.
