1. 소개 및 이상view
This manual provides comprehensive instructions for the installation, operation, and maintenance of the FERMAX Duox Plus Veo-XL 7" Monitor. The Veo-XL monitor is a key component of the Duox Plus digital two-wire video intercom system, designed to provide secure and convenient communication with visitors at your entrance.
The monitor features a 7-inch color display, offering clear video and audio communication, along with intuitive controls for answering calls, opening doors, and other system functions. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
Figure 1: FERMAX Duox Plus Veo-XL 7" Monitor. This image shows the front view of the monitor, highlighting its 7-inch screen and the control buttons located below the display.
2. 설정 및 설치
Proper installation is crucial for the optimal performance of your FERMAX Duox Plus Veo-XL monitor. It is highly recommended that installation be performed by a qualified technician.
2.1. 패키지 내용
- FERMAX Duox Plus Veo-XL 7" Monitor
- 마운팅 브래킷
- 연결단자
- 나사와 벽면 플러그
- 사용 설명서 (본 문서)
2.2. 모니터 장착
- Choose a suitable location on an interior wall, away from direct sunlight, heat sources, and excessive humidity.
- Secure the mounting bracket to the wall using the provided screws and wall plugs. Ensure the bracket is level.
- Route the Duox Plus system wiring through the opening in the mounting bracket.
2.3. 배선 연결
Connect the Duox Plus bus wires (data and power) to the designated terminals on the monitor. Refer to the wiring diagram provided with your complete Duox Plus system for specific terminal assignments. Ensure all connections are secure and correctly polarized.
중요한: Disconnect power to the Duox Plus system before making any wiring connections to prevent electrical shock or damage to the equipment.
3. 사용 설명서
The FERMAX Duox Plus Veo-XL monitor is designed for user-friendly operation. Below are the primary functions and controls.
3.1. Monitor Controls
- 화면: 7-inch color display for video and menu navigation.
- Answer/Call Button: Typically represented by a telephone icon. Press to answer an incoming call or initiate an intercom call (if configured).
- 도어 릴리스 버튼: Often depicted with a key icon. Press to unlock the main entrance door.
- 카메라 View 단추: Usually a camera icon. Press to manually activate the outdoor panel camera and view the entrance area without an incoming call.
- F1 버튼: A programmable function button (F1). Its function depends on system configuration (e.g., secondary door release, auxiliary device activation).
- 메뉴/탐색 버튼: (If present, typically arrows or a grid icon) Used to navigate through on-screen menus for settings adjustments.
3.2. 기본 작업
- 전화 받기: When a visitor presses the call button at the outdoor panel, the monitor will ring and display the visitor's video. Press the Answer/Call Button to establish communication.
- Speaking to a Visitor: Once the call is answered, you can speak directly through the monitor's built-in microphone and speaker.
- 문 열기: 통화 중이거나, 또는 viewing the camera, press the 도어 릴리스 버튼 to unlock the entrance.
- Monitoring the Entrance: 를 누르세요 카메라 View 단추 to see who is at the entrance without them having to ring.
- 설정 조정: Access the monitor's on-screen menu (if available) to adjust brightness, contrast, ringtone, and other preferences. Refer to the system's advanced programming manual for detailed menu navigation.
4. 유지관리
Regular maintenance ensures the longevity and optimal performance of your FERMAX Duox Plus Veo-XL monitor.
4.1. 청소
- 부드럽고 마른 보풀 없는 천으로 모니터 화면을 닦으십시오.asing.
- 완고한 자국의 경우 약간 dampen the cloth with water. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surface.
- Ensure no liquid enters the monitor's openings.
4.2. 환경 조건
The monitor is designed for indoor use. Avoid exposing it to:
- Extreme temperatures (below 0°C or above 40°C).
- High humidity or direct water splashes.
- Direct sunlight for prolonged periods, which can cause screen discoloration.
5. 문제 해결
If you encounter issues with your FERMAX Duox Plus Veo-XL monitor, refer to the following common problems and solutions before contacting technical support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No image on screen / Monitor not powering on. | No power supply to the system or monitor. Loose wiring connection. | Check if the Duox Plus system power supply is active. Verify all wiring connections to the monitor are secure. |
| 통화 중 소리가 나지 않습니다. | Microphone or speaker issue. Volume set too low. | Check monitor volume settings. Ensure the outdoor panel's microphone/speaker is not obstructed. |
| 문 열림 장치가 작동하지 않습니다. | Wiring issue to the door lock. Lock mechanism fault. | Verify the wiring from the system to the door lock. Ensure the door lock itself is functional. |
| Poor video quality (blurry, distorted). | Interference on the line. Damaged wiring. Outdoor panel camera lens dirty. | Check for sources of electrical interference. Inspect wiring for damage. Clean the outdoor panel camera lens. |
If the problem persists after attempting these solutions, please contact FERMAX technical support or your installer for further assistance. Do not attempt to repair the monitor yourself.
6. 기술 사양
Below are the key technical specifications for the FERMAX Duox Plus Veo-XL 7" Monitor.
- 모델 번호: d3b1bb73-2a22-420c-aec2-646bd0c5892f
- 화면 크기: 7 인치
- 해결: 1280 x 720 픽셀
- 종횡비: 16시 9분
- 화면 표면 설명: 광택있는
- 이미지 명암비: 2000시 1분
- 패키지 크기: 7.48 x 7.48 x 1.69인치(19 x 19 x 4.3cm)
- 제조업체: 페르맥스
- 첫 이용 가능 날짜: 26년 2023월 XNUMX일
7. 보증 및 지원
For information regarding the warranty period and terms for your FERMAX Duox Plus Veo-XL 7" Monitor, please refer to the warranty card included with your product or contact your point of purchase. Warranty details may vary by region and retailer.
For technical support, service, or inquiries about spare parts, please contact FERMAX customer service or visit the official FERMAX website. You may need to provide your product model number (d3b1bb73-2a22-420c-aec2-646bd0c5892f) and purchase details.
페르맥스 공식 Web대지: www.fermax.com
