소개
Welcome to the MINGDA Magician Pro2 3D Printer user manual. This document provides essential information for setting up, operating, maintaining, and troubleshooting your new 3D printer. The Magician Pro2 is an FDM (Fused Deposition Modeling) 3D printer designed for ease of use and reliable performance, featuring intelligent automatic leveling and a responsive main board.
Figure 1: MINGDA Magician Pro2 3D Printer. This image shows the assembled 3D printer with a sample print of an astronaut sitting on a moon-like base. The printer features a black frame and a beige build plate.
상자 안에 무엇이 들어있나요?
Upon unboxing your MINGDA Magician Pro2, please verify that all components listed below are present:
- 사용자 설명서(본 문서)
- SD 카드
- 30g White filament (samp르)
- Allen wrench set (5 pieces: 0.1 mm - 0.5 mm diameter)
- Spare Teflon tube
- 전원 공급 케이블
- 8mm/10mm 렌치
- 필라멘트 홀더
- 예비 노즐
- Assorted screws: M5*25 mm (2), M4*20 mm (4), M3*8 mm (2), M4*10 mm (2)
설정
1. 조립
The Magician Pro2 is designed for quick and easy assembly. The main components are pre-assembled, requiring minimal steps to get the printer ready for operation. Refer to the included quick start guide for detailed visual instructions on attaching the gantry, extruder assembly, and filament holder.
2. 전원 연결
Connect the provided power supply cable to the printer's power input port, located at the rear. Ensure the power switch is in the OFF position before connecting to a power outlet. Once connected, switch the printer ON.
3. Intelligent Automatic Leveling
The Magician Pro2 features an intelligent automatic leveling system. Upon initial power-on or when prompted, the printer will automatically perform a bed leveling sequence. This system uses a highly sensitive sensor to ensure optimal bed adhesion for the first layer. Follow the on-screen prompts on the printer's display for this process. Manual adjustments are generally not required.
작동 지침
1. 필라멘트 로딩
- 필라멘트 스풀을 필라멘트 홀더에 놓으세요.
- 필라멘트를 익스트루더의 입력 구멍에 넣으십시오.
- On the printer's display, navigate to the "Load Filament" option. The extruder will heat up and automatically pull the filament through until it extrudes from the nozzle.
- Once filament extrudes smoothly, the loading process is complete.
2. 인쇄 시작
- Insert the SD card containing your prepared G-code file into the printer's SD card slot.
- On the printer's display, navigate to "Print" or "SD Card" and select your desired G-code file.
- Confirm your selection to begin the printing process. The printer will preheat the nozzle and print bed before starting.
3. Monitoring and Pausing Prints
During printing, the display will show progress, temperature, and other relevant information. You can pause or stop a print using the controls on the display if necessary.
4. Changing Filament During a Print
To change filament mid-print, pause the print, then select the "Unload Filament" option. Once the old filament is removed, load the new filament as described in step 1, and then resume the print.
유지
1. Cleaning the PEI Plate
After each print, allow the PEI plate to cool down. Gently remove the printed object. For best adhesion, clean the PEI plate regularly with isopropyl alcohol (IPA) and a clean cloth to remove any residue or oils.
2. 노즐 유지관리
Periodically inspect the nozzle for clogs or wear. If a clog occurs, use the provided needle or a cold pull method to clear it. Replace the nozzle if it shows signs of significant wear or damage to maintain print quality.
3. 일반 청소
Keep the printer free of dust and filament debris. Use a soft brush or compressed air to clean the gantry, lead screws, and other moving parts. Ensure the cable management remains neat, as the Magician Pro2 features a sleek design with minimal exposed cables.
4. Upgrades
The Magician Pro2's self-developed main board has a modular design, allowing for future upgrades. The printer also supports upgrades to an all-metal hot end, providing more flexibility for various filament types. Consult the MINGDA official website for information on available upgrades and installation guides.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 필라멘트가 압출되지 않음 | 노즐 막힘, 필라멘트 엉킴, 온도 오류. | Clear nozzle with needle, untangle filament, verify print temperature settings. |
| 첫 번째 층 접착력이 불량함 | Dirty print bed, incorrect bed temperature, leveling issue. | Clean PEI plate with IPA, check bed temperature, re-run auto-leveling. |
| Print quality issues (layer shifts, stringing) | Loose belts, incorrect retraction settings, wet filament. | Check belt tension, adjust retraction settings in slicer, dry filament. |
| 프린터 전원이 켜지지 않습니다 | Power cable disconnected, faulty power supply, tripped circuit. | Ensure power cable is securely connected, check power outlet, contact support if issue persists. |
명세서
Figure 2: MINGDA Magician Pro2 3D Printer Dimensions. This image illustrates the physical dimensions of the printer, showing a depth of 21.9 inches, a width of 20.4 inches, and a height of 26.2 inches.
- 제품 크기: 21.9인치 깊이 x 20.4인치 너비 x 26.2인치 높이(55.6 x 51.8 x 66.5cm)
- 품목 무게: 27.5파운드(12.5킬로그램)
- 상표: 밍다
- 모델: Magician Pro2
- 재료: 플라스틱 및 금속
- 색상: 블랙 프로
- 제조업체: 밍다
- 온모드 전력 소비량: 360 와트
보증 및 지원
For detailed warranty information, please refer to the warranty card included with your purchase or visit the official MINGDA website. If you encounter any issues or require technical assistance, please contact MINGDA customer support through their official channels. Ensure you have your product model number (Magician Pro2) and purchase details ready when contacting support.
